Distribution uniformity of added elements in twin-roll cast Al–Zn–Mg–Cu alloy by multi-electromagnetic fields
查看参考文献16篇
文摘
|
The micromorphology and the concentration of massive precipitates produced by twin-roll casting (TRC) processes without and with multi-electromagnetic fields for Al–Zn–Mg–Cu alloy at 670 ℃ were investigated in detail by means of optical microscopy (OM) and electron probe micro analyzer (EPMA). The results clearly show that under a 0.2 T static magnetic field, the macro-segregation bands are remarkably alleviated according to the order of uniform static magnetic field, half-wave oscillating electromagnetic field as well as alternating oscillating electromagnetic field, as compared with the non-field TRC process (B = 0). Moreover, under the alternating oscillating electromagnetic TRC process, almost all segregation bands disappear. Additionally, through the observation on a smaller scale, the netlike precipitates elongated and broken by electromagnetic force, and replaced by numerous bulk depositions. EPMA analysis shows that the added atoms are diffused from deposition to α (Al) matrix, resulting in that the solute concentration in and around the precipitates is tending toward uniformity and stability. |
来源
|
Rare Metals
,2015,34(8):546-552 【核心库】
|
DOI
|
10.1007/s12598-014-0417-x
|
关键词
|
Al–Zn–Mg–Cu alloy
;
Electromagnetic field
;
Twin-roll casting
;
Macro-segregation bands
|
地址
|
1.
School of Materials and Metallurgy, Northeastern University, Key Laboratory of Ministry of Education for Electromagnetic Processing of Materials, Shenyang, 110819
2.
Guangdong Donggong Information Science & Technology Company Limited, Foshan, 510000
|
语种
|
英文 |
文献类型
|
研究性论文 |
ISSN
|
1001-0521 |
学科
|
金属学与金属工艺 |
基金
|
国家973计划
|
文献收藏号
|
CSCD:5482487
|
参考文献 共
16
共1页
|
1.
Williams J C. Progress in structural materials for aerospace systems.
Acta Mater,2003,51(19):5777
|
被引
409
次
|
|
|
|
2.
Yan L M. Static softening behaviors of 7055 alloy during the interval time of multi-pass hot compression.
Rare Met,2013,32(3):241
|
被引
9
次
|
|
|
|
3.
Su X. Effect of magnetostatic field on microstructure of Al-Zn-Mg-Cu aluminum alloy strip manufactured by twin-roll casting.
Adv Mater Res,2013,652/654(3):2427
|
被引
4
次
|
|
|
|
4.
Hiroyuki T. Mechanical analysis of toughness degradation due to premature fracture of course inclusion in wrought aluminum alloys.
Mater Sci Eng A,2000,280(1):69
|
被引
2
次
|
|
|
|
5.
Liu S D. Influence of aging on quench sensitivity effect of 7055 aluminum alloy.
Mater Char,2008,59(1):53
|
被引
43
次
|
|
|
|
6.
Dumont D. Characterisation of precipitation microstructures in aluminum alloys 7040 and 7050 and their relationship to mechanical behavior.
Acta Mater,2003,51(3):713
|
被引
7
次
|
|
|
|
7.
Zhang X M. Microstructures and boundaries distribution in Al polycrystals rolled under different temperatures.
Acta Metallurgica Sinica (in Chinese),2005,41(9):947
|
被引
1
次
|
|
|
|
8.
Li J W. Effect of ultrasonic resonance degree on the formation of porosity in aluminum ingot.
Foundry Technol,2008,29(6):790
|
被引
1
次
|
|
|
|
9.
Zhao X L. A new technique of introducing electromagnetic field to continuous cast rolling.
Trans Nonferr Met Soc,1995,5(4):145
|
被引
1
次
|
|
|
|
10.
Jia P H. Microstructure and properties of 7050 aluminum alloy with three-step homogenization.
Chin J Rare Met,2014,38(5):774
|
被引
1
次
|
|
|
|
11.
Park J K. Microstructure of commercial Al-Zn-Mg-Cu Al alloy in the T651 and T7 tempers.
Metall Trans A,1983,14(10):1957
|
被引
30
次
|
|
|
|
12.
Li X T. An experimental study of grain refinement by ultrasonic treatment during continuous casting.
Rare Metal Mat Eng,2007,36(3):377
|
被引
2
次
|
|
|
|
13.
Zhang Q. Microstructure and solute distribution of Al-Zn-Mg-Cu alloy produced by semi-continuous casting under electromagnetic vibration.
T Nonferr Metal Soc,2003,13(5):1184
|
被引
1
次
|
|
|
|
14.
Duan Y B. Effect of chemical composition on formation performance of 7050 alloy billets.
J. Chongqing University,2004,27(4):100
|
被引
1
次
|
|
|
|
15.
Dorward R C. Effects of casting practice on macrosegregation and microstructure of 2024 alloy billet.
Light Metal,2013,3(8):825
|
被引
1
次
|
|
|
|
16.
Li J. Numerical simulation on magnetic penetrating performance of soft-contact electromagnetic casting rectangular mould for duraluminium alloys.
Nonferr Alloys,2008,6(S1):523
|
被引
1
次
|
|
|
|
|