一种[011]取向镍基单晶合金的蠕变断裂
Creep fracture of a nickel base single crystal superalloy along [011] orientation
查看参考文献13篇
|
文摘
|
研究了[011]取向的镍基单晶高温合金在750~980℃温度范围和200~680MPa应力下的蠕变断裂特征.在扫描电镜上对各种实验状态下的蠕变断口和纵向剖面进行了详细观察.研究发现:在低温750℃和中温870℃不同初始蠕变应力条件下,枝晶间区亚晶界处不规则γ'/γ界面是裂纹主要萌生场所,这些已萌生的裂纹在与外加应力轴垂直的(011)面上沿<110>和<100>两个方向扩展;980℃不同初始应力条件下,裂纹主要在合金中显微疏松孔洞处萌生,沿与外应力轴垂直的方向扩展.观察750℃和870℃不同应力状态蠕变试样的纵向剖面,对亚晶界区不规则γ'相面积分数的测量和计算表明,用面积分数表征该合金[011]取向在中低温状态下的蠕变损伤程度是可行的. |
|
其他语种文摘
|
The creep fracture behavior of a [011 ] oriented single crystal nickel base superalloy was investigated in the temperature range of 750 to 980 ℃ and the stress scope of 200 to 680 MPa. The fracture surfaces and longitudinal sections of crept specimens were examined by scanning electron microscopy (SEM). It is found that under different initial stresses at 750 ℃ and 870 ℃,creep cracks seem always to initiate at the γ'/γ interface on the interdendritic sub-boundary and propagate along the sub-boundary trace, and their cleavage planes expand along <110> and <100> on the (011) plane. But under different stresses at 980℃,creep cracks initiate at inherent casting pores and slowly propagate perpendicular to the axis of stress applied up to the final fast fracture. After observing the longitudinal sections of specimens crept under different stresses at 750 ℃ and 870 ℃, it is feasible for the area fraction of irregular 7' phase in the sub-boundary to characterize the creep damage level before collapsing of the superalloy along the [011 ] direction at the moderated and low temperatures. |
|
来源
|
工程科学学报
,2015,37(5):615-620 【核心库】
|
|
DOI
|
10.13374/j.issn2095-9389.2015.05.012
|
|
关键词
|
镍基高温合金
;
单晶
;
蠕变断裂
;
形貌
|
|
地址
|
1.
沈阳理工大学机械工程学院, 沈阳, 110159
2.
中国科学院金属研究所, 沈阳, 110016
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
2095-9389 |
|
学科
|
金属学与金属工艺 |
|
基金
|
辽宁省教育厅重点实验室支持项目
|
|
文献收藏号
|
CSCD:5436580
|
参考文献 共
13
共1页
|
|
1.
Chen Q Z. Mechanism of <112>/3 slip initiation and anisotropy of phase in CMSX-4 during creep at 750℃ and 750 MPa.
Mater Sci Eng. A,2003,356(1/2):352
|
被引
15
次
|
|
|
|
|
2.
Suzuki A. Crack Progression during sustained-peak low-cycle fatigue in single-crystal Ni-base superalloy Rene N5.
Metall Mater Trans A,2010,41(4):947
|
被引
1
次
|
|
|
|
|
3.
Sass V. Creep anisotropy in the monocrystalline nickel-base superalloy CMSX- 4.
Superalloy,1996:283
|
被引
1
次
|
|
|
|
|
4.
Zhou H. Thermo mechanical fatigue behavior of the third-generation, single crystal superalloy TMS-75: deformation structure.
Metall Mater Trans A,2004,35(6):1779
|
被引
2
次
|
|
|
|
|
5.
Tsuno N. Effect of ruthenium on creep strength of Ni-base single-crystal superalloys at 750 ℃ and 750 MPa.
Metall Mater Trans A,2009,40(2):269
|
被引
9
次
|
|
|
|
|
6.
Gunturi S S K. Anisotropic creep in CMSX-4 in orientations distant from <001>.
Mater Sci Eng A,2000,289:289
|
被引
27
次
|
|
|
|
|
7.
Miura N. The influence of dislocation substructure on creep rate during accelerating creep stage of single crystal nickel-based superalloy CMSX-4.
Superalloys,2000:377
|
被引
2
次
|
|
|
|
|
8.
Milhet X. On the influence of the dendritic structure on the creep behavior of a Re-containing superalloy at high temperature/low stress.
Mater Sci Eng A,2012,546:139
|
被引
2
次
|
|
|
|
|
9.
Han G M. Temperature dependence of anisotropic stress-rupture properties of nickel-based single crystal superally SRR99.
Trans Nonferrous Met Soc China,21(8):1717
|
被引
1
次
|
|
|
|
|
10.
张中奎. DD6单晶合金蠕变特性及断裂机理.
材料科学与工程学报,2012,30(3):375
|
被引
13
次
|
|
|
|
|
11.
Liu J L. Anisotropy of high temperature stress rupture property of a nickel-base single crystal superalloy.
Acta Metallurgica Sinica (in Chinese),2001,37(12):1233
|
被引
4
次
|
|
|
|
|
12.
赫次伯格R W.
工程材料的变形与断裂力学,1982
|
被引
2
次
|
|
|
|
|
13.
Gunturi S S K. Formulation and identification of damage kinetic constitutive equations.
Continuum Damage Mechanics Theory and Applications,1987,295:37
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问