基于显微视觉的亚像素压电陶瓷驱动特性测量
Measurement on driving characteristic of a piezoelectric actuator based on the sub-pixel of micro-vision
查看参考文献16篇
文摘
|
为了得到纳米操作压电陶瓷驱动器高精度的驱动特性,提出一种基于显微视觉的亚像素位移测量方法。本文采用Harris角点初始定位,对标准的栅格图像序列进行角点匹配,获得模板匹配的初始区域。并提出了二元拉格朗日插值与二元非线性Newton-Raphson迭代算法的亚像素位移测量方法,能够在保证良好测量精度的同时有效地减少亚像素匹配中耗时的相关计算。最后使用改进的亚像素图像块匹配方法对实际的压电陶瓷驱动器的驱动特性进行了测量,并与真实结果和理论模型描述结果进行了对比。实验结果表明,该算法位移测量精度高、稳定性好,得到的压电陶瓷驱动特性曲线符合物理分析结果,能够满足高精度的微纳米测量要求。 |
其他语种文摘
|
In order to obtain driving characteristics of the piezoelectric actuator,a sub-pixel displacement measurement method based on micro-vision is proposed. The initial position is solved by the Harris corner location method. The initial template matching region is obtained by corner matching to critena raster image sequence. The sub-pixel displacement measurement method of duality Lagrange interpolation and nonlinear Newton-Raphson iterated algorithm are proposed,which can effectively reduce the time-consuming for sub-pixel matching related calculations to ensure the good measurement accuracy. A modified sub-pixel image block matching method is used to measure the actual driving characteristics of piezoelectric actuators,and the measurement result is compared with the real displacement and PI model. Experimental results show that the algorithm of displacement measurement exhibits high accuracy and good stability. Piezoelectric characteristic curves obtained agree with the results of physical analysis and can satisfy requirements of high-precision measurements of nanomanipulation. |
来源
|
仪器仪表学报
,2015,36(5):1163-1169 【核心库】
|
关键词
|
微纳米操作
;
压电陶瓷驱动器
;
Harris角点
;
亚像素
|
地址
|
1.
沈阳航空航天大学自动化学院, 沈阳, 110136
2.
东北大学信息科学与工程学院, 沈阳, 110004
3.
中国科学院沈阳自动化研究所, 机器人学国家重点实验室, 沈阳, 110016
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0254-3087 |
学科
|
机械、仪表工业 |
基金
|
国家自然科学基金青年基金
;
国家自然科学基金
|
文献收藏号
|
CSCD:5432193
|
参考文献 共
16
共1页
|
1.
侯静. 基于AFM的虚拟纳米手操作策略研究.
仪器仪表学报,2013,34(5):1167-1172
|
被引
4
次
|
|
|
|
2.
王学亮. 运放对压电陶瓷驱动电路系统精度影响的研究.
电子测量技术,2014,37(10):33-36
|
被引
5
次
|
|
|
|
3.
Liu Y. Hysteresis and creep modeling and compensation for a piezoelectric actuator using a fractional-order Maxwell resistive capacitor approach.
Smart Materials and Structures,2013,22(11):115020
|
被引
4
次
|
|
|
|
4.
陈俊. 压电驱动器驱动电源设计.
国外电子测量技术,2014,33(4):48-53
|
被引
4
次
|
|
|
|
5.
张春雷. 前馈控制算法校正相移微动台非线性运动.
电子测量与仪器学报,2014,28(8):879-884
|
被引
8
次
|
|
|
|
6.
王栋. 基于梯形算子的AFM驱动器非对称迟滞性校正.
仪器仪表学报,2015,36(1):32-38
|
被引
6
次
|
|
|
|
7.
Wang D. Feedforward hysteresis calibration of piezoelectric actuator in AFM based on inverse model identification.
Proceedings of the 11th World Congress on Intelligent Control and Automation,2014:1561-1566
|
被引
1
次
|
|
|
|
8.
邓芳明. 低功耗全数字电容式传感器接口电路设计.
仪器仪表学报,2014,35(5):69-71
|
被引
1
次
|
|
|
|
9.
Ouyang R. Absolute stability analysis of linear systems with duhem hysteresis operator.
Automatica,2014,50:1860-1866
|
被引
2
次
|
|
|
|
10.
Zhou M L. Feedforward-feedback hybrid control for magnetic shape memory alloy actuators based on the krasnosel 'skii-pokrovskii model.
PloS one,2014,9(5):e97086
|
被引
3
次
|
|
|
|
11.
Li Z. Compensation of hysteresis nonlinearity in magnetostrictive actuators with inverse multiplicative structure for preisach model.
IEEE Transactions on Automation Science and Engineering,2014,11(2):613-619
|
被引
9
次
|
|
|
|
12.
Kim J H. Visually servoes 3-D alignment of multiple objects with sub-nanometer precision.
IEEE Transactions on Nanotechnology,2007,7(3):321-330
|
被引
4
次
|
|
|
|
13.
魏阳杰. 微纳米压电陶瓷驱动器的迟滞特性建模.
东北大学学报: 自然科学版,2014,35(2):166-169
|
被引
2
次
|
|
|
|
14.
高宗余. MEMS传感器随机误差Allan方差分析.
仪器仪表学报,2011,32(12):225-230
|
被引
2
次
|
|
|
|
15.
Iyer R V. Control of hysteretic systems through inverse compensation.
IEEE Contrl Systems,2009,29(1):83-99
|
被引
5
次
|
|
|
|
16.
Dong R L. A modified prandtl-ishlinskii modeling method for hysteresis.
Physica B: Condensed Matter,2009,404(8):1336-1342
|
被引
2
次
|
|
|
|
|