帮助 关于我们

返回检索结果

基于射影变换圆阵靶标中心像点的计算
Calculation for imaging center of circular array target based projective transform

查看参考文献16篇

陈天飞 1 *   赵吉宾 2   王银灵 3   吴翔 1  
文摘 在基于圆阵靶标的视觉测量系统应用中,投影椭圆的几何中心并不是圆中心像点。为此,提出了一种基于射影变换的靶标圆中心像点计算方法。在完成退化椭圆边缘的亚像素坐标提取之后,该方法通过迭代的方式计算投影图像与生成的靶标规格相似图案之间的射影变换关系,可将退化椭圆边缘映射成较规则的圆。采用基于随机抽样一致(RANSAC)的圆拟合算法剔除异常点并计算圆心坐标,通过射影逆变换将其映射回原图像中,最终迭代收敛的圆心坐标点即为中心像点。仿真与实际实验均效果显著,从而验证了所提方法中心像点计算的有效性和准确性,并且可应用于众多视觉测量系统中,具有较强的实用性。
其他语种文摘 In the application of vision measurement system using circular array target,the projected ellipse geometric center is not the imaging point of the circle center. Therefore,this paper proposes a calculation method for the imaging point of the target circle center based projective transform. After the extraction of the sub-pixel coordinates of degenerated ellipse edge,the proposed method calculates the projective transformation relationship between the projected image and generated pattern similar to the target with the way of iteration, and then the degenerated ellipse edge can be mapped into regular circle. After that, the circle fitting algorithm based random sample consensus (RANSAC) is used to eliminate the abnormal points and compute the center coordinates,and the center can be mapped back to the original image through the inverse projective transformation. Finally,the convergence circle center point of iterative process is the imaging center of the target circle. The simulation and actual experiment both achieve significant effect, which verifies the effectiveness and accuracy of the presented imaging center calculation method. In addition, the proposed method can be applied to various vision measurement system and has good practicability.
来源 仪器仪表学报 ,2015,36(4):895-902 【核心库】
关键词 圆阵靶标 ; 中心像点 ; 射影变换 ; 亚像素 ; RANSAC
地址

1. 河南工业大学电气工程学院, 郑州, 450001  

2. 中国科学院沈阳自动化研究所, 沈阳, 110016  

3. 南车青岛四方机车车辆股份有限公司, 青岛, 266111

语种 中文
文献类型 研究性论文
ISSN 0254-3087
学科 机械、仪表工业;自动化技术、计算机技术
基金 国家自然科学基金 ;  辽宁省科技创新重大专项 ;  中国科学院沈阳自动化研究所博士后经费 ;  河南省教育厅科学技术研究重点 ;  河南工业大学高层次人才基金
文献收藏号 CSCD:5410597

参考文献 共 16 共1页

1.  周封. 基于随机Hough变换的复杂条件下圆检测与数目辨识. 仪器仪表学报,2013,34(3):622-628 被引 27    
2.  陈仁文. 基于改进型粒子群算法的卡箍直径检测算法研究. 仪器仪表学报,2014,35(8):1837-1843 被引 10    
3.  付生鹏. 基于平面镜的相机-显示器快速标定方法. 仪器仪表学报,2013,34(12):2770-2776 被引 6    
4.  刘震. 基于双平面靶标的多视觉传感器现场全局校准. 机械工程学报,2009,45(7):228-232 被引 7    
5.  韩建栋. 采用光学定位跟踪技术的三维数据拼接方法. 光学精密工程,2009,17(1):45-51 被引 13    
6.  夏仁波. 基于圆形标志点的全自动相机标定方法. 仪器仪表学报,2009,30(2):368-373 被引 27    
7.  Heikkil A J. A four-step camera calibration procedure with implicit image correction. IEEE Computer Society on Computer Vision and Pattern Recognition,1997:1106-1112 被引 1    
8.  李占利. 摄影测量中圆形目标中心像点计算方法研究. 仪器仪表学报,2011,32(10):2235-2241 被引 10    
9.  韩建栋. 三维视觉测量中圆中心投影误差分析方法. 计算机科学,2010,37(12):247-249 被引 5    
10.  邢德奎. 圆形目标精密定位方法的研究与应用. 仪器仪表学报,2009,30(12):2593-2598 被引 24    
11.  Kim J S. Geometric and algebraic constraints of projected concentric circles and their applications to camera calibration. IEEE Transactions on Pattern Analysis and Machine Intelligence,2005,27(4):637-642 被引 22    
12.  徐鹏. 摄像机标定中靶标圆心像点坐标的精确计算. 红外与激光工程,2011,40(7):1342-1346 被引 5    
13.  吴福朝. 计算机视觉中的数学方法,2008 被引 40    
14.  高世一. 基于Zernike正交矩的图像亚像素边缘检测算法改进. 自动化学报,2008,34(9):1163-1168 被引 39    
15.  周骏. 基于序贯概率及局部优化随机抽样一致性算法. 仪器仪表学报,2012,33(9):2037-2044 被引 10    
16.  蔡健荣. 基于双目立体视觉的果树三维信息获取与重构. 农业机械学报,2012,43(3):152-156 被引 19    
引证文献 5

1 黄秋红 静态锥束CT 成像系统的几何标定方法研究 仪器仪表学报,2015,36(10):2339-2346
被引 3

2 徐平 基于边缘像元投影的微小轴承亚像素边缘检测 仪器仪表学报,2016,37(10):2300-2306
被引 4

显示所有5篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号