帮助 关于我们

返回检索结果

Ti和Al反应的动力学分析
Analysis on Kinetics Process of Ti and Al Reaction

查看参考文献17篇

刘艳梅 1 *   武高辉 2   修子扬 2   陈国钦 2  
文摘 以Ti粉、纯Al和钛纤维为原料,采用压力浸渗法研制了Ti_f+Ti_p/Al复合材料,利用XRD和SEM测试分析了复合材料的相组成和显微组织,利用EDX测试分析了不同反应温度下纤维周围反应层中Al的浓度分布。计算了Ti和Al间的扩散系数,确定了扩散系数与温度和成分的变化规律,求出扩散激活能。结果表明,随着反应温度的升高,纤维周围的反应层厚度逐渐增大,各相的互扩散系数逐渐增大,各相的扩散激活能存在如下关系:Q_(Ti_3Al)>Q_(TiAl_2)>Q_(TiAl)>Q_(TiAl_2)。
其他语种文摘 Ti_f+Ti_p/Al composite was fabricated through pressure infiltration of Ti powder, pure Al and Ti fiber. Phases composition and microstructure of the composite were analyzed by XRD and SEM. Al concentration of reaction layer around Ti fiber was investigated by EDX at different reaction temperatures. The interdiffusion coefficient of Ti and Al was calculated, and the relationship between interdiffusion coefficient and both temperature and composition was confirmed. The activation energy for Ti-Al intermetallic compound was obtained. Results show that both the reaction layer thickness around Ti fiber and interdiffusion coefficient of different Ti-Al intermetallic compounds increase with the temperature increasing, and the activation energies are in the order of Q_(Ti_3Al)>Q_(TiAl_2)>Q_(TiAl)>Q_(TiAl_2).
来源 稀有金属材料与工程 ,2015,44(3):599-602 【核心库】
关键词 钛铝金属间化合物 ; 动力学 ; 扩散系数 ; 激活能
地址

1. 沈阳飞机工业(集团)有限公司, 辽宁, 沈阳, 110850  

2. 哈尔滨工业大学, 黑龙江, 哈尔滨, 150001

语种 中文
文献类型 研究性论文
ISSN 1002-185X
学科 金属学与金属工艺
文献收藏号 CSCD:5387406

参考文献 共 17 共1页

1.  李宝辉. 宇航学报,2006,26(2):72 被引 1    
2.  王衍行. 元素粉末Ti与Al反应机理的研究进展. 材料导报,2007,21(1):83 被引 7    
3.  耿林. 原位自生非连续增强钛基复合材料的研究现状与展望. 复合材料学报,2006,23(1):1 被引 19    
4.  黄旭. TiAl基复合材料的研究进展. 稀有金属材料与工程,2006,35(11):1845 被引 13    
5.  陈玉勇. 颗粒增强TiAl基复合材料的硏究进展. 稀有金属材料与工程,2011,40(11):2060 被引 4    
6.  Yao W. Materials Science and Engineering A,2008,480(1/2):456 被引 23    
7.  Sujata M. Journal of Materials Science Letters,2001,16(13):1175 被引 1    
8.  王军. 低温真空扩散反应制备高性能TiAl合金粉. 稀有金属材料与工程,2013,42(6):1264 被引 2    
9.  孙达. 用Wagner方程研究Ti衬底与Al膜间的反应和互扩散. 兰州大学学报,1995,31(10):22 被引 1    
10.  张俊善. 燃烧合成TiAl_3化学应动力学研究. 金属学报,2002,38(10):1027 被引 6    
11.  Mishin Y. Acta Mater,2000,48:589 被引 50    
12.  Asta M. Physical Review B,1992,46(9):5055 被引 7    
13.  李培杰. Sc和Ti对纯铝细化机理的价电子结构分析. 科学通报,2008,53(11):1345 被引 8    
14.  Liu Y M. Journal of Materials Science,2009,44(16):4258 被引 5    
15.  Wagner C. Acta Metallurgica,1969,17:99 被引 13    
16.  胡赓祥. 材料科学基础,2006:149 被引 1    
17.  Vanloo F J J. Acta Materialia,1973,21(1):61 被引 1    
引证文献 2

1 袁江 RE(RE=Y,La,Ce,Lu)对TiAl性能影响的计算研究 热加工工艺,2017,46(2):42-46
被引 0 次

2 魏守征 坡口角度及焊丝偏移量对钛/铝冷弧MIG焊接头显微组织与力学性能的影响 焊接学报,2021,42(8):59-66
被引 1

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号