Effect of gas bubble on cell voltage oscillations based on equivalent circuit simulation in aluminum electrolysis cell
基于铝电解槽等效电路仿真的气泡对槽电压波动的影响
查看参考文献28篇
|
文摘
|
A method to investigate the effect of gas bubble on cell voltage oscillations was established. The whole aluminum electrolysis cell was treated as a resistance circuit, and the dynamic simulation of the cell equivalent circuit was modeled with Matlab/Simulink simulation software. The time-series signals of cell voltage and anode current were obtained under different bubble conditions, and analyzed by spectral and statistical analysis methods. The simulation results show that higher bubble release frequency has a significant effect on the cell voltage oscillations. When the bubble coverage of one anode block exceeds 80%, the cell voltage may exceed its normal fluctuation amplitude. The simulation also proves that the anode effect detected by computer in actual production is mainly the whole cell anode effect. |
|
其他语种文摘
|
建立一种研究气泡对槽电压波动影响的方法, 该方法将整个电解槽等效为一个电阻电路, 并利用Matlab/Simulink仿真软件建立等效电路的仿真模型进行动态仿真研究, 从而获得不同气泡状态下槽电压和阳极电流的时间序列数据, 利用频谱和统计分析方法对这些数据进行分析。结果显示, 较高的气泡释放频率对槽电压波动的影响更大, 当一组阳极表面气泡覆盖率超过80%时, 槽电压可能超出正常的波动范围。仿真结果证实了在实际生产中计算机监测到的阳极效应主要是全槽的阳极效应。 |
|
来源
|
Transactions of Nonferrous Metals Society of China
,2015,25(1):335-344 【核心库】
|
|
DOI
|
10.1016/s1003-6326(15)63609-3
|
|
关键词
|
aluminum electrolysis
;
equivalent circuit
;
gas bubble
;
cell voltage
;
anode effect
|
|
地址
|
1.
School of Materials and Metallurgy, Northeastern University, Shenyang, 110819
2.
College of Mechanical and Materials Engineering, North China University of Technology, Beijing, 100144
|
|
语种
|
英文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1003-6326 |
|
学科
|
金属学与金属工艺 |
|
基金
|
supported by the National Key Technology R&D Program of China
|
|
文献收藏号
|
CSCD:5364910
|
参考文献 共
28
共2页
|
|
1.
Zoric J. On gas bubbles in industrial aluminium cells with prebaked anodes and their influence on the current distribution.
Journal of Applied Electrochemistry,2000,30:787-794
|
被引
9
次
|
|
|
|
|
2.
Einarsrud K E. Anodic voltage oscillations in Hall-Heroult cells.
Light Metals,2011:555-560
|
被引
1
次
|
|
|
|
|
3.
Haupin W E. A scanning reference electrode for voltage contours in aluminum smelting cells.
Journal of Metals,1971,23(1):46-49
|
被引
5
次
|
|
|
|
|
4.
Doheim M A. Computational modeling of flow in aluminum reduction cells due to gas bubbles and electromagnetic forces.
Metallurgical and Materials Transactions B,2007,38(2):113-119
|
被引
6
次
|
|
|
|
|
5.
Kuang Z. Current distribution in aluminum electrolysis cells with Soderberg anodes. Part 1: Experimental study and estimate of anode consumption.
Journal of Applied Electrochemistry,1996,26:481-486
|
被引
1
次
|
|
|
|
|
6.
Zoric J. Current distribution in aluminum electrolysis cells with Soderberg anodes. Part 1: Mathematical modeling.
Journal of Applied Electrochemistry,1996,26:795-802
|
被引
1
次
|
|
|
|
|
7.
Kiss L I. Simulation of the bubble layer in aluminum electrolysis cells.
Light Metals,2005:559-564
|
被引
2
次
|
|
|
|
|
8.
Poncsak S. Size distribution of the bubbles in the Hall-Heroult cells.
Light Metals,2006:457-461
|
被引
2
次
|
|
|
|
|
9.
Richards N. Characterisation in the fluctuation in anode current density and bubble events in industrial reduction cells.
Light Metals,2003:315-322
|
被引
1
次
|
|
|
|
|
10.
Kiss L I. Effect of the bubble growth mechanism on the spectrum of voltage fluctuations in the reduction cell.
Light Metals,2002:217-223
|
被引
1
次
|
|
|
|
|
11.
Chenung C. Frequency response analysis of anode current signals as a diagnostic aid for detecting approaching anode effects in aluminum smelting cells.
Light Metals,2013:887-892
|
被引
1
次
|
|
|
|
|
12.
Xue J. Bubble behaviour-cell voltage oscillation during aluminium electrolysis and the effects of sound and ultrasound.
Light Metals,1995:265-271
|
被引
7
次
|
|
|
|
|
13.
Feng Naixiang.
Aluminum electrolysis, (in Chinese),2006:57-60
|
被引
1
次
|
|
|
|
|
14.
Haupin W. Interpreting the components of cell voltage.
Light Metals,1998:531-537
|
被引
2
次
|
|
|
|
|
15.
Drengstig T. The impact of varying conductivity on the control of aluminum electrolysis cells.
Light Metals,2002:205-216
|
被引
1
次
|
|
|
|
|
16.
Zoric J. Mathematical modelling of industrial aluminium cells with prebaked anodes, Part I: Current distribution and anode shape.
Journal of Applied Electrochemistry,1997,27:916-927
|
被引
1
次
|
|
|
|
|
17.
Frederic J. Metal pad roll instabilities.
Light Metals,2002:483-487
|
被引
2
次
|
|
|
|
|
18.
Antille J. Using a magnetohydrodynamic model to analyze pot stability in order to identify an abnormal operation condition.
Light Metals,2002:477-482
|
被引
1
次
|
|
|
|
|
19.
Wang Y. Fluid flow and bubble behavior in the aluminum electrolysis cell.
Light Metals,2009:581-586
|
被引
1
次
|
|
|
|
|
20.
Choudhary G. Electrical conductivity for aluminum cell electrolyte between 950-1025 ℃ by regression equation.
Journal of the Electrochemical Society,1973,120(3):381-383
|
被引
4
次
|
|
|
|
|
了解气象卫星更多信息，请访问