铬盐无钙焙烧渣加压硫酸浸出
Pressure Leaching of Chromium-containing Slag from Non-calcium Roasting with Sulfuric Acid
查看参考文献18篇
文摘
|
对铬盐无钙焙烧渣进行加压硫酸浸出,考察了硫酸浓度、反应温度、铬酸酐加入量、反应时间、铬渣粒度对铬渣硫酸浸出效果的影响. 结果表明,焙烧渣主要物相组成为:铬铁矿(FeCr_2O_4)和镁铁矿[Mg(Fe,Al)_2O_4]等尖晶石类矿物含量为73.11%,赤铁矿(α-氧化铁)为12.42%,钠霞石(NaAlSiO_4)为10.02%. 铬高效溶出的最佳工艺条件为:硫酸浓度65%(ω),反应温度120℃,铬酸酐加入量为铬渣质量的10%,反应时间2 h,搅拌转速500 r/min,该条件下溶出率可达97.93%. 尾渣以硅物相为主,SiO_2含量为80.8%. 浸出过程符合收缩未反应核模型,反应表观活化能为16.38 kJ/mol,反应速率为外扩散和化学反应混合控制. |
其他语种文摘
|
The pressure leaching process of chromium-contained slag from non-calcium roasting with sulfuric acid was studied. The effects of sulfuric acid concentration, reaction temperature, added amount of chromic anhydride, reaction time and particle size on the leaching of chromium were examined. The results show that the main phase components of the slag determined by systematic analysis and characterization are chromite (FeCr_2O_4), iron magnesium ore [Mg(Fe,Al)_2O_4], the content of spinel minerals is 73.11%, hematite (a-iron) 12.42%, and sodium nepheline (NaAlSiO_4) 10.02%. The optimum leaching conditions of chromium in the slag are obtained as: sulfuric acid concentration 65%, temperature 120℃, added content of chromium anhydride 10% of chromium slag, time 2 h, particle size 75 mm and stirring speed 500 r/min. Under the conditions, the leaching rate reaches 97.93%. The leaching residue is silica-based, with 80.8% SiO_2. The pressure leaching of chromium-containing slag from non-calcium roasting with sulfuric acid can be modeled with the shrinking core model. The apparent activation energy is 16.38 kJ/mol. The leaching rate is controlled by external diffusion and interface chemical reaction. |
来源
|
过程工程学报
,2014,14(6):915-922 【核心库】
|
关键词
|
铬盐
;
物相
;
硫酸
;
浸出
;
加压
;
铬酸酐
|
地址
|
1.
中国矿业大学(北京)化学与环境工程学院, 湿法冶金清洁生产技术国家工程实验室, 北京, 100083
2.
中国科学院过程工程研究所, 湿法冶金清洁生产技术国家工程实验室, 北京, 100190
3.
中冶京诚(秦皇岛)工程技术有限公司, 河北, 秦皇岛, 066004
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1009-606X |
学科
|
化学工业 |
基金
|
国家863计划
|
文献收藏号
|
CSCD:5320453
|
参考文献 共
18
共1页
|
1.
梅海军. 浅析铬盐清洁生产技术"无钙焙烧法"的优势.
无机盐工业,2005,37(3):5-13
|
被引
5
次
|
|
|
|
2.
丁翼. 我国铬盐生产状况及发展建议.
无机盐工业,2000,32(7):28-30
|
被引
4
次
|
|
|
|
3.
纪柱. 开发实施中的中国铬酸钠新工艺(1).
无机盐工业,2010,42(1):1-4
|
被引
25
次
|
|
|
|
4.
马兰英. 内蒙古黄河铬盐股份有限公司.
铬盐工业,2005(1):77-78
|
被引
1
次
|
|
|
|
5.
王兴润. 铬渣治理技术的应用进展及特点分析.
中国给水排水,2009,25(4):10-14
|
被引
8
次
|
|
|
|
6.
景学森. 铬渣处理处置技术研究进展.
环境技术,2006,24(3):33-36
|
被引
13
次
|
|
|
|
7.
纪柱. 铬铁矿酸溶生产三价铬化合物.
无机盐工业,2012,44(12):83-87
|
被引
1
次
|
|
|
|
8.
Sharma T. The Kinetics of Iron Dissolution from Chromite Concentrate.
Miner. Eng,1990,3(6):599-605
|
被引
2
次
|
|
|
|
9.
Vardar E. Acid Leaching of Chromite.
Miner. Eng,1994,7(5/6):605-617
|
被引
7
次
|
|
|
|
10.
陈恒芳. 铬酸酐与硝酸钾联产清洁工艺的相图分析.
过程工程学报,2004,4(6):307-310
|
被引
1
次
|
|
|
|
11.
纪柱. 铬铁矿酸溶、电解制铬酸酐.
铬盐工业,2011(1):36-45
|
被引
1
次
|
|
|
|
12.
刘承军. 硫酸加入量对铬铁矿硫酸浸出行为的影响.
工业加热,2011,40(3):59-61
|
被引
2
次
|
|
|
|
13.
史培阳.
一种碱式硫酸铬的制备方法. 中国专利:31340482,2003
|
被引
1
次
|
|
|
|
14.
刘承军.
一种硫酸浸出处理铬铁矿的方法.中国专利:201010511246,2011
|
被引
1
次
|
|
|
|
15.
史培阳.
铬铁矿硫酸浸出制备碱式硫酸铬清洁生产工艺研究,2002:15-23
|
被引
1
次
|
|
|
|
16.
Geveci A. Sulfuric Acid Leaching of Turkish Chromite Concentrate.
Miner. Eng,2002,15(11):885-888
|
被引
9
次
|
|
|
|
17.
波格达洛夫.
铬酸酐制法. RU Pat.: 2349551,2009
|
被引
1
次
|
|
|
|
18.
华一新.
冶金过程动力学导论,2004:188-193
|
被引
12
次
|
|
|
|
|