固相球磨-水热法制备Mn_(1.5)6Co_(0.9)6Ni_(0.48)O_4纳米粉体及其NTC性能
Preparation and NTC characterization of Mn_(1.5)6Co_(0.9)6Ni_(0.48)O_4 nanopowders by solid-state ball milling hydrothermal method
查看参考文献16篇
|
文摘
|
采用固相球磨-水热法制备了Mn_(1.5)6 Co_(0.9)6Ni_(0.48)O_4纳米粉体,研究了水热反应温度对产物粉体结构和形貌的影响,讨论了固相球磨-水热反应机理。采用X射线衍射仪、扫描电子显微镜和直流阻温测试仪对样品结构、形貌和电性能进行表征,结果表明固相球磨-水热法由于结合了固相球磨法和一步水热法的优势,因此可在低结晶温度下获得粒径小、分散度高的四方尖晶石结构纳米粉体。电学性能测试结果表明在193~373 K测试温区内,样品所制得陶瓷材料具有明显的负温度系数热敏电阻特性,材料常数B值处于3 396~3 625 K。 |
|
其他语种文摘
|
The Mn_(1.5)6Co_(0.9)6Ni_(0.48)O_4 nanopowders were prepared by solid-state ball milling hydrothermal method. The effects of hydrothermal temperature on structure and morphology of the powders were studied and synthesis mechanism of solid-state ball milling hydrothermal method was discussed. The structure and electrical properties of the prepared samples were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM) and direct current (DC) resistance temperature measurement. Because it combines the advantages of the solid ball milling method and one-step hydrothermal method, the solid-state ball milling hydrothermal method can be applied to obtain smaller particle size and high dispersion of tetragonal spinel structure nanopowders at low crystallization temperatures. Electrical properties demonstrated that all ceramic samples prepared by the Mn_(1.5)6Co_(0.9)6Ni_(0.48)O_4 nanopowders have obviously negative temperature coefficient characteristics in a wide temperature range from 193K to 373 K. The B values were in the range of 3 396-3 625 K. |
|
来源
|
功能材料
,2014,45(20):20146-20149 【核心库】
|
|
DOI
|
10.3969/j.issn.1001-9731.2014.20.031
|
|
关键词
|
固相球磨-水热法
;
纳米粉体
;
Mn_(1.5)6 Co_(0.9)6Ni_(0.48)O_4
;
负温度系数
;
热敏电阻
|
|
地址
|
中国科学院新疆理化技术研究所, 中国科学院特殊环境功能材料与器件重点实验室;;新疆电子信息材料与器件重点实验室, 乌鲁木齐, 830011
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-9731 |
|
学科
|
化学工业 |
|
基金
|
中国科学院西部之光人才培养计划
;
新疆自治区青年科技创新人才培养工程青年博士科技人才培养资助项目
;
国家863计划
;
国家自然科学基金资助项目
|
|
文献收藏号
|
CSCD:5280241
|
参考文献 共
16
共1页
|
|
1.
Muralidharan M N. Optimization of process parameters for the production of Ni-Mn-Co-Fe based NTC chip thermistors through tape casting route.
J Alloys Compd,2011,509(38):9363-9371
|
被引
2
次
|
|
|
|
|
2.
Wang J. Structural and electrical properties of NiMg_xMn_2-xO_4 NTC thermistors prepared by using sol-gel derived powders.
Mater Sci Eng B,2011,176(7):616-619
|
被引
2
次
|
|
|
|
|
3.
Zhang B. Complex impedance analysis of (Y_2O_3+CeO_2)-YCr_(0.5)Mn_(0.5)O_3 composite NTC ceramics.
J Alloys Compd,2012,512(1):132-139
|
被引
4
次
|
|
|
|
|
4.
Lan Y Q. Preparation and properties of NTC thermistors with measuring very low temperature.
Journal of Functional Materials,2010,41(3):438-444
|
被引
1
次
|
|
|
|
|
5.
Ghanizadeh S. Synthesis of nano α-alumina powders using hydrothermal and precipitation routes: a comparative study.
Ceram Int,2014,40(1):1311-1319
|
被引
2
次
|
|
|
|
|
6.
Zhang Y. Direct preparation and formation mechanism of belt-like doped VO_2(M) with rectangular cross sections by one-step hydrothermal route and their phase transition and optical switching properties.
J Alloys Compd,2013,570(5):104-113
|
被引
7
次
|
|
|
|
|
7.
Wang Q. One-step growth of high-quality CdTe quantum dots via hydrothermal method and cytotoxicity evaluation.
Powder Technol,2013,247(7):81-86
|
被引
2
次
|
|
|
|
|
8.
Chai X P. Microstructure and electrical properties of Mn-Co-Zn-Cu-O NTC thermistors.
Journal of Functional Materials,2011,42(5):911-917
|
被引
1
次
|
|
|
|
|
9.
Muralidharan M N. Effect of Cu and Fe addition on electrical properties of Ni-Mn-Co-O NTC thermistor compositions.
Ceram Int,2012,38(8):6481-6486
|
被引
4
次
|
|
|
|
|
10.
Liang S. An efficient way to improve the electrical stability of Ni_(0.6)Si_(0.2)Al_(0.6)Mn_(1.6)O_4 NTC thermistor.
Ceram Int,2011,37(7):2537-2541
|
被引
2
次
|
|
|
|
|
11.
Liu R. Shape evolution and tunable properties of monodisperse magnetite crystals synthesized by a facile surfactant-free hydrothermal method.
Eur J Inorg Chem,2010,2010(28):4499-4505
|
被引
1
次
|
|
|
|
|
12.
Allen W B. On the estimation of average crystallite size of zeolites from the scherrer equation: a critical evaluation of its application to zeolites with one-dimensional pore systems.
Microporous Mesoporous Mater,2009,117(1/2):75-90
|
被引
30
次
|
|
|
|
|
13.
Ashcroft N W.
Solid state physics,1976:86-95
|
被引
1
次
|
|
|
|
|
14.
Chen L. Preparation of equiaxed grains of multiphase ZrO_2(Al_2O_3, Fe_2O_3) ceramics.
The Chinese Journal of Process Engineering,2002,2(1):45-49
|
被引
1
次
|
|
|
|
|
15.
Wang M H. Synthesis of doped ZnO nanopowders in alcohol-water solvent for varistors applications.
Mater Lett,2014,121(15):149-151
|
被引
3
次
|
|
|
|
|
16.
He L.
The preparation and properties of bulk, thick film and thin film NTC thermistors,2012
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问