帮助 关于我们

返回检索结果

铝合金表面处理工业废渣制备氢氧化铝工艺
Preparation of Aluminum Hydroxide from Industrial Residue of Aluminum Alloy Surface Treatment Process

查看参考文献23篇

文摘 研究了以铝合金表面处理工业废渣为原料制备Al(OH)_3的工艺,探讨了NaOH浸提Al和H_2SO_4法沉淀制备Al(OH)_3的过程,考察了碱酸浓度及用量、温度、时间等对制备过程的影响,采用正交实验确定了最佳工艺条件,分析了Al(OH)_3产品的化学组成、形貌和质量. 结果表明,干燥废渣中Al含量为28.7%,以Al(OH)_3晶体存在. 在加入的NaOH与废渣中Al(OH)_3摩尔比为2.88:1、反应温度75℃、时间55 min的最佳浸提条件下,Al浸出率达97.5%. 在加入的H_2SO_4与浸提液中AlO_2~-摩尔比为(0.95~1.10):1及pH=5.5的最佳沉淀条件下,Al(OH)_3的沉淀收率为89.2%,Al总回收率为87.1%. Al(OH)3产品为无定型白色粉末,粒径约为17 mm,纯度达95.5%.
其他语种文摘 Preparation of aluminum hydroxide from industrial residue of aluminum alloy surface treatment process was studied. The leaching process of Al from the industrial residue by NaOH solution and precipitation of Al(OH)_3 from Al leaching solution by H_2SO_4 were explored. The effects of the concentration and dosage of alkali or acid, reaction temperature and time were examined. Process optimization was obtained by orthogonal experiments. The chemical composition, morphology and quality of Al(OH)_3 product were examined as well. The results showed that the Al content in the dry residue was 28.7%, and Al existed as the form of Al(OH)_3 crystal in the industrial residue. The optimum conditions of leaching process were the molar ratio of NaOH addition to Al(OH)_3 in the industrial residue 2.88:1, reaction temperature 75℃, and reaction time 55 min. At these conditions, the maximum yield of aluminum in leaching process reached up to 97.5%. At the optimal conditions of precipitation process of Al(OH)_3, such as the molar ratio of H_2SO_4 addition to AlO_2~- in leaching solution (0.95~1.10):1 and pH value 5.5, the precipitation yield of Al(OH)_3 reached up to 89.2%, and the total recovery rate of aluminum was obtained by 87.1%. The Al(OH)_3 product was amorphous with the diameter of particles of about 17 mm. The purity of Al(OH)_3 in the product was up to 95.5%.
来源 过程工程学报 ,2014,14(5):841-845 【核心库】
关键词 铝合金表面处理 ; 工业废渣 ; 氢氧化铝 ; 制备 ; 浸提 ; 沉淀
地址

中国科学院过程工程研究所, 中国科学院绿色过程工程重点实验室, 北京, 100190

语种 中文
文献类型 研究性论文
ISSN 1009-606X
学科 行业污染、废物处理与综合利用
基金 广东省中国科学院全面战略合作项目 ;  广东省科技计划项目 ;  广东省省部产学研重大专项基金资助项目 ;  四川省科技计划基金资助项目
文献收藏号 CSCD:5279079

参考文献 共 23 共2页

1.  盛春磊. 我国铝及铝合金轧制设备现状与发展趋向. 铝加工,2005(164):18-23 被引 1    
2.  王自寿. 中国铝型材工业的发展与现状. 轻合金加工技术,2002,30(2):11-15 被引 4    
3.  付志强. 铝型材表面碱蚀处理废渣的回收利用. 有色金属加工,2002,31(5):40-41 被引 2    
4.  刘细祥. 利用铝型材厂废铝渣制备聚合氯化铝的研究. 无机盐工业,2014,46(4):53-55 被引 6    
5.  张小琴. 铝合金废渣综合利用技术研究进展. 材料研究与应用,2008,2(4):332-335 被引 4    
6.  张汉杰. 利用工业含铝废渣生产高效水处理剂聚合氯化铝. 化学工业与工程技术,2006,27(3):30-31 被引 1    
7.  刘慕顺. 利用铝型材废水碱渣制备活性氧化铝及水泥添加剂的研究,2012:16-38 被引 1    
8.  刘欣. 工业污泥制备氧化铝的实验研究. 金刚石与磨料磨具工程,2007(1):71-73, 67 被引 2    
9.  吴任平. 利用铝型材厂污泥和硝酸研制的活性氧化铝比表面与孔结构研究. 硅酸盐通报,2005,24(6):46-49 被引 1    
10.  Farinha A R. Shock Activation of α-Alumina from Calcinated Al-rich Sludge. Ceram. Int,2009,35(5):1897-1904 被引 2    
11.  Farinha A R. Production of Sintered α-Alumina by Explosive Compaction from Low Temperature Calcinated Aluminum-rich Sludge. Waste Biomass Valor,2013,3(4):627-633 被引 3    
12.  刘艳春. 利用铝废渣制备片状堇青石的影响因素研究. 分析测试学报,2010,29(7):663-668 被引 6    
13.  曾令可. 利用铝加工废渣制备堇青石材料. 材料导报:综述篇,2009,23(1):90-92 被引 3    
14.  Ribeiro M J. Properties of Sintered Mullite and Cordierite Pressed Bodies Manufactured Using Al-rich Anodising Sludge. Ceram. Int,2008,34(3):593-597 被引 2    
15.  吴任平. 利用含铝废渣合成的堇青石结构表征. 人工晶体学报,2007,36(5):1091-1095 被引 4    
16.  谢志煌. 利用铝材厂污泥研制刚玉/莫来石/钛酸铝复相材料. 中国陶瓷,2011,47(9):23-26 被引 3    
17.  刘艳春. 利用铝型材厂工业废渣制备莫来石质耐火材料. 陶瓷学报,2010,31(3):484-489 被引 1    
18.  曾景旭. 利用铝型材厂污泥和叶腊石制备莫来石材料. 硅酸盐通报,2010,29(3):705-708 被引 6    
19.  唐奇. 铝废渣在建筑陶瓷中资源化利用技术的研究. 陶瓷,2009(4):42-44 被引 2    
20.  Ewais E M M. Utilization of Aluminum Sludge and Aluminum Slag (Dross) for the Manufacture of Calcium Aluminate Cement. Ceram. Int,2009,35(8):3381-3388 被引 11    
引证文献 1

1 李国健 氧化-解胶联合法分离含铬铝型材污泥中的铬铝金属 环境工程学报,2019,13(8):1977-1985
被引 0 次

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号