帮助 关于我们

返回检索结果

Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill

查看参考文献20篇

文摘 The interstand tension control is one of the most important ways to meet tight tolerances for strip product quality during tandem cold rolling process. Using coordinate analysis and parabolic approximation for the mass flow balance principle, the strip velocities eliminating the use of forward slips and backward slips were calculated. In order to reduce the effect of roll eccentricity on the tension measurement, a filter based on bilinear transformation was designed. Applying a first-order Taylor series approximation, the transfer function matrix model of interstand tension stress was derived. The actual measurements on-site and the final calculation results showed that the established model had high calculation accuracy and was beneficial for interstand tension control of tandem cold rolling process.
来源 Journal of Iron and Steel Research , International,2014,21(9):830-836 【核心库】
DOI 10.1016/s1006-706x(14)60149-7
关键词 tension control ; tandem cold rolling mill ; bilinear transformation ; transfer function matrix model
地址

1. Northeastern University, State Key Laboratory of Rolling and Automation, Liaoning, Shenyang, 110819  

2. School of Materials Science and Engineering, Shenyang University of Technology, Liaoning, Shenyang, 110023  

3. Rolling Technology Center of Liaoning, Liaoning, Shenyang, 110819

语种 英文
文献类型 研究性论文
ISSN 1006-706X
学科 冶金工业
基金 Item Sponsored by Fundamental Research Funds for the Central Universities of China
文献收藏号 CSCD:5239007

参考文献 共 20 共1页

1.  Pittner J. IEEE Trans. Ind. Appl,2010,46:703-711 被引 2    
2.  Asano K. Control Eng. Pract,1998,6:1021-1027 被引 6    
3.  Hu P H. Int. J. Mach. Tools Manufact,2000,40:1-19 被引 29    
4.  Hu P H. Int. J. Mach. Tools Manufact,2000,40:21-31 被引 12    
5.  Ding X K. Rolling Process Automation,2002 被引 1    
6.  Ferreira H C. ISIJ Int,2008,48:1389-1393 被引 1    
7.  Jiang Z Y. J. Mater. Process. Technol,2003,140:542-547 被引 17    
8.  Zhao T Y. J. Cent. South Univ. Sci. Technol,2010,17:1000-1005 被引 2    
9.  Jia C Y. J. Iron Steel Res. Int,2008,15(2):23-27 被引 3    
10.  Wang J S. J. Mater. Process. Technol,2005,162/163:585-590 被引 11    
11.  Montmitonnet P. Comput. Methods Appl. Mech. Engng,2006,195:6604-6625 被引 12    
12.  Dyer S A. IEEE Instrum. Meas. Mag,2000,3:30-34 被引 1    
13.  Zhai G S. 2010 International Conference on Modeling. Identification and Control,2010:225-230 被引 1    
14.  Liu F J. Techniques of Automation and Applications,2008,27(9):44-47 被引 1    
15.  Zhang J. Digital Signal Process,2010,20:23-38 被引 2    
16.  Kuo S M. IEEE Trans. Circ. Syst. Fund. Theor. Appl,2005,52:617-624 被引 1    
17.  Venkata Reddy N. J, Mater. Process. Technol,2001,116:269-277 被引 15    
18.  Liu G M. Tension and Thickness Control Strategy Analysis of Two Stands Reversible Cold Rolling Mill. J. Iron Steel Res. Int,2012,19(10):20-25 被引 8    
19.  Koofigar H R. Int. J. Precis. Eng. Manuf,2011,12:393-403 被引 2    
20.  Zhang X F. Adv. Mater. Res,2011,145:230-237 被引 1    
引证文献 2

1 高玉峰 板带轧制凸度与厚度鲁棒解耦控制器设计 控制工程,2018,25(3):380-385
被引 1

2 王桥医 基于动态辊缝的连轧机多参数耦合颤振建模及工程应用 中南大学学报. 自然科学版,2020,51(3):687-696
被引 0 次

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号