帮助 关于我们

返回检索结果

Effect of Isothermal Temperature on Microstructure and Mechanical Properties of High Al-Low Si TRIP Steel

查看参考文献26篇

文摘 In this study, the effect of isothermal temperature on microstructure and mechanical properties of a high Al-low Si TRIP steel was investigated using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, electron back scattered diffraction, and tensile test. The results show that typical microstructure containing ferrite, bainite, and retained austenite can be obtained when two-stage heat treatment process was utilized. When annealing temperature is 840 ℃ and austempering temperature is 400 ℃, the tensile strength is 542 MPa and the product of strength and elongation is 17,685 MPa%. The morphologies and stability of the retained austenite in low silicon/high aluminum TRIP steel were finally discussed.
来源 Acta Metallurgica Sinica(English Letters) ,2014,27(3):389-394 【核心库】
DOI 10.1007/s40195-014-0068-9
关键词 TRIP steel ; Microstructure ; Mechanical properties ; Isothermal temperature ; Retained austenite
地址

1. School of Materials and Metallurgy, Northeastern University, Shenyang, 110819  

2. New Product Development and Application Center, Nanjing Iron and Steel Co., Ltd., Nanjing, 210035  

3. Northeastern University, State Key Laboratory of Rolling and Automation, Shenyang, 110819

语种 英文
文献类型 研究性论文
ISSN 1006-7191
学科 金属学与金属工艺
基金 supported by the National High Technology Research and Development Program ;  国家自然科学基金
文献收藏号 CSCD:5198085

参考文献 共 26 共2页

1.  Kwon E P. Mater. Sci. Eng. A,2011,528:5007 被引 3    
2.  de Cooman B C. Curr. Opin. Solid StateMater. Sci,2004,8:285 被引 69    
3.  Tirumalasetty G K. Acta Mater,2012,60:1311 被引 15    
4.  Girault E. Scr. Mater,2001,44:885 被引 21    
5.  Zhang S. Acta Mater,2013,61:1895 被引 19    
6.  Lee S. Scr. Mater,2011,65:225 被引 54    
7.  Bhadeshia H K D H. ISIJ Int,2002,42:1059 被引 7    
8.  Gomez M. ISIJ Int,2009,49:302 被引 3    
9.  Jiang H T. Mechanical Property and Microstructural Characterization of C-Mn-Al-Si Hot Dip Galvanizing TRIP Steel. J. Iron Steel Res. Int,2012,19:29 被引 6    
10.  Imai N. CAMP ISIJ,1995,8:572 被引 1    
11.  Li L. J. Mater. Sci. Technol,2004,20:135 被引 10    
12.  Bellhouse E M. Mater. Sci.Eng.A,2008,491:39 被引 12    
13.  Bellhouse E M. Mater. Sci. Eng. A,2007,463:147 被引 15    
14.  Mahieu J. Ironmak. Steelmak,2002,29:29 被引 1    
15.  Maki J. Mater. Sci. Technol,2003,19:125 被引 13    
16.  Kobayashi J. ISIJ Int,2012,52:1894 被引 8    
17.  Kammouni A. Mater. Sci. Eng. A,2009,518:89 被引 13    
18.  Kim S. Metall. Mater. Trans. A,2001,32:505 被引 1    
19.  Sakuma Y. Metall. Mater. Trans. A,1992,23:1221 被引 11    
20.  Feng Q X. Mater. Sci. Eng. A,2014,603:169 被引 3    
引证文献 2

1 Han Bo Effect of Austempering–Partitioning on the Bainitic Transformation and Mechanical Properties of a High-Carbon Steel Acta Metallurgica Sinica(English Letters),2015,28(5):614-618
被引 2

2 Zhao Yang Effect of Microstructure on Tensile Behavior and Mechanical Stability of Retained Austenite in a Cold-Rolled Al-Containing TRIP Steel Acta Metallurgica Sinica(English Letters),2019,32(10):1237-1243
被引 2

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号