帮助 关于我们

返回检索结果

热处理对挤压变形Mg-7%Zn-0.6%Zr-0.5%Y合金低周疲劳行为的影响
INFLUENCE OF HEAT TREATMENT ON LOW-CYCLE FATIGUE BEHAVIOR OF EXTRUDED Mg-7%Zn-0.6%Zr-0.5%Y ALLOY

查看参考文献27篇

张思倩 1 *   吴伟 1   陈丽丽 2   车欣 1   陈立佳 1  
文摘 对热挤压、时效处理(T5态)及固溶+时效处理(T6态)Mg-7%Zn-0.6%Zr-0.5%Y合金(质量分数)分别进行了低周疲劳实验,探讨了热处理对合金低周疲劳变形行为的影响.结果表明:时效处理和固溶+时效处理可提高热挤压Mg-7%Zn-0.6%Zr-0.5%Y合金的循环变形抗力;时效处理降低了合金的疲劳寿命,固溶+时效处理可以提高合金在较高外加总应变幅下的疲劳寿命,但降低合金在较低外加总应变幅下的低周疲劳寿命;不同状态合金的弹性应变幅和塑性应变幅与载荷反向周次的关系可分别用Basquin和Coffin-Manson公式来描述;时效及固溶+时效处理过程中形成的长周期堆垛有序结构(LPSO相)是合金的循环变形抗力大幅提高的主要原因,而疲劳变形过程中形成的孪晶可能是时效态合金疲劳寿命降低的原因.
其他语种文摘 The low-cycle fatigue tests have been conducted for the Mg-7%Zn-0.6%Zr-0.5%Y alloys (mass fraction) subjected to extrusion, aging (T5) and solution plus aging (T6) treatment, respectively. The influence of heat treatment on the fatigue deformation behavior of the alloy has also been systematically investigated. The results show that T5 and T6 treatment can improve the cyclic deformation resistance of Mg-7%Zn-0.6%Zr-0.5%Y alloys. T5 treatment can reduce the fatigue life of the alloy. However, T6 treatment can improve the fatigue life at high total strain amplitudes, and reduce the fatigue life at low total strain amplitudes. The relationship between elastic strain amplitude, plastic strain amplitude and reversals to failure of the alloys can be described by Basquin and Coffin-Manson equations, respectively. For the alloys subjected to both T5 and T6 treatments, the increase in the cyclic deformation resistance is mainly due to the formation of long period stacking ordered (LPSO) phase. The twins formed during the fatigue deformation may be responsible for the decrease in the fatigue life of the alloy subjected to T5 treatment.
来源 金属学报 ,2014,50(6):700-706 【核心库】
DOI 10.3724/sp.j.1037.2013.00781
关键词 镁合金 ; 低周疲劳 ; 循环变形 ; 热处理
地址

1. 沈阳工业大学材料科学与工程学院, 沈阳, 110870  

2. 沈阳晨光弗泰波纹管有限公司, 沈阳, 110141

语种 中文
文献类型 研究性论文
ISSN 0412-1961
学科 金属学与金属工艺
文献收藏号 CSCD:5176243

参考文献 共 27 共2页

1.  Avedsain M M. Magnesium and Magnesium Alloys,1999:7 被引 1    
2.  Polmear I J. Mater Sci Technol,1994,10:1 被引 244    
3.  Nishikawa Y. Funct Mater,1999,19(6):21 被引 5    
4.  Horikir H. Mater Sci Eng, A,1994,179:702 被引 1    
5.  Lee S. Metall Mater Trans, A,1998,29:1221 被引 35    
6.  Payne R J M. J Inst Met,1960,88:417 被引 2    
7.  Unsworth W. Int J Mater Prod Technol,1989,4:1359 被引 1    
8.  Drits M E. Met Sci Heat Treat,1979,21:887 被引 21    
9.  Zhao H D. J Alloys Compd,2011,509:627 被引 9    
10.  Wang J. J Alloys Compd,2008,454:194 被引 9    
11.  Luo S Q. Effect of mole ratio of Y to Zn on phase constituent of Mg-Zn-Zr-Y alloys. Trans Nonferrous Met Soc China,2011,21:795 被引 34    
12.  Xu D K. J Alloys Compd,2007,432:129 被引 60    
13.  Coffin L F. Trans Am Soc Mech Eng,1954,76:931 被引 18    
14.  Coffin L F. Met Trans,1972,3:1777 被引 1    
15.  Basquin O H. Proc Am Soc Test Mater,1990,10:626 被引 1    
16.  王中光(译). 材料的疲劳,1999:158 被引 1    
17.  Eliezer A. J Light Met,2001,1:179 被引 24    
18.  Hilpert M. J Mater Eng Perform,2000,9:402 被引 12    
19.  Xu D K. J Alloys Compd,2008,454:123 被引 7    
20.  Kawamura Y. Metall Trans,2001,42:1172 被引 187    
引证文献 4

1 陈凌 镁合金低周疲劳寿命预测模型探讨 中国机械工程,2017,28(5):512-518
被引 4

2 陈凌 AZ91D室温环境棘轮及其低周疲劳行为 材料科学与工程学报,2017,35(5):741-746
被引 2

显示所有4篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号