基于SRTM DEM数据的全国地表面积计算研究
Study on Calculating Surface Area in China Based on SRTM DEM Data
查看参考文献15篇
文摘
|
对山区表面积的估算方法为准确估算复杂地形条件下的陆地生态系统固碳特征提供了基础条件。投影面积与实际表面积在山区有相当大的差异,这些差异对于估算陆表覆被面积、碳水循环有较大的影响。该文通过地形特征点提取算法和不规则三角网构建算法,以省域为单位提取地形特征点,并在此基础上构建了不规则三角网,求算区域表面积。根据表面积与投影面积的比较,得出以下结论:1)不同分辨率的DEM数据对计算结果是有影响的,分辨率越大,表面积越大;2)在SRTM DEM尺度(90 m)下,我国陆地范围的表面积为1 003.36万km~2,比投影面积多出约43万km~2。 |
其他语种文摘
|
The studies about the land surface phenomena or process such as atmosphere,soil,geomorphology,biogeochemistry are based on the projective plane.However,the difference between the projected plane and the actual land surface is very large and can lead to great uncertainty for estimating land surface area or carbon stocks of terrestrial ecosystems,especially in China,where the area of mountain accounts for more than 2/3 of the territory.Through the terrain feature point extraction algorithm and the triangulated irregular network construction algorithm,this study finally computed the land surface area of different province in China.According to the comparison of land surface area and the projective plane,the results are that:1) The spatial resolution of DEM have affects on the calculation results,and the higher the spatial resolution is,the larger the surface area is.2)Based on SRTM DEM,the surface area in China is 10 033 600 km~2,greater than projected area about 430 000 km~2.The estimation method of land surface area for mountainous region has provided the necessary conditions for the terrain carbon fixation characteristics. |
来源
|
地理与地理信息科学
,2014,30(3):51-55 【核心库】
|
关键词
|
表面积
;
投影面积
;
DEM
;
地形特征点
;
不规则三角网
|
地址
|
中国科学院水利部成都山地灾害与环境研究所, 四川, 成都, 610041
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1672-0504 |
学科
|
测绘学 |
基金
|
中国科学院“百人计划”项目
;
知识创新方向性项目
;
中国科学院碳专项
|
文献收藏号
|
CSCD:5153218
|
参考文献 共
15
共1页
|
1.
梁立恒.
基于DEM空间分析的地表过程研究,2008
|
被引
2
次
|
|
|
|
2.
李辉. 面向地表过程模拟的降雨径流模型开发与应用.
农业工程学报,2010(2):123-128
|
被引
2
次
|
|
|
|
3.
汤国安.
数字高程模型及地学分析的原理与方法,2005
|
被引
149
次
|
|
|
|
4.
周访滨.
基于栅格DEM自动划分微观地貌形态的研究,2006
|
被引
5
次
|
|
|
|
5.
刘爱利.
地理信息系统算法基础,2007
|
被引
1
次
|
|
|
|
6.
FLORINSKY. Accuracy of local topographic variables derived from digital elevation model.
Geographical Information Systems,1998,12(1):47-61
|
被引
1
次
|
|
|
|
7.
TSAI. Delaunay triangulations in TIN creation:An overview and a lineartime algorithm.
Int J of GIS,1993,7(6):501-524
|
被引
1
次
|
|
|
|
8.
Sloan. A fast algorithm for constructing delaunay triangulations in the plane.
Andvanced Engineering Software,1987(9):34-35
|
被引
1
次
|
|
|
|
9.
Fang T. Delaunay triangulation using a uniform grid.
IEEE Computer Graphics and Application,1993(5):34-37
|
被引
1
次
|
|
|
|
10.
林凯荣. DEM栅格分辨率对TOPMODEL模拟不确定性的影响研究.
自然资源学报,2010(6):1022-1032
|
被引
3
次
|
|
|
|
11.
吴军. DEM分辨率对AVSWAT2000径流模拟的敏感性分析.
遥感信息,2007(3):8-13
|
被引
9
次
|
|
|
|
12.
王秀云. DEM在林地资源表面积调查中的应用.
南京师范大学学报(工程技术版),2006(1):86-90
|
被引
8
次
|
|
|
|
13.
江帆. 基于复化公式的DEM表面积算法分析.
测绘学院学报,2005(4):263-265
|
被引
7
次
|
|
|
|
14.
冯仲科. 林地面积量算方法的比较研究.
北京林业大学学报,2004(5):17-21
|
被引
2
次
|
|
|
|
15.
陈吉龙. DEM在林地表面积计算中的应用研究.
西南农业学报,2008(5):1348-1352
|
被引
10
次
|
|
|
|
|