帮助 关于我们

返回检索结果

铁单元素基合金表面激光高熵合金化涂层的制备
SYNTHESIS OF LASER HIGH ENTROPY ALLOYING COATING ON THE SURFACE OF SINGLE-ELEMENT Fe BASE ALLOY

查看参考文献20篇

文摘 利用高功率半导体激光器进行合金化处理,采用等摩尔比的Co, Cr,Al, Cu四主元合金粉末,在Fe单元素基合金Q235钢表面成功制备出FeCoCrAICu激光高熵合金化涂层.利用SEM, XRD, EDS及显微硬度计对FeCoCrAICu激光高熵合金化层的微观组织形貌、相结构、成分分布及性能进行系统研究.结果表明:Q235基材主元素Fe在激光辐照时参与了表面合金化过程,形成了 FeCoCrAICu五主元高熵合金涂层;合金化层相组成为具有简单bcc结构的固溶体,显微组织为典型的枝晶组织;激光高熵合金化层仅在基体界面附近出现了少量σ四方结构中间相,从高熵合金化层表面到基材,体系的混合熵呈高熵-中熵-低熵梯度变化;FeCoCrAICu激光高熵合金化涂层的显微硬度高达8.3 GPa,为基材Q253钢的3倍以上.
其他语种文摘 FeCoCrAICu laser high entropy alloying coating has been synthetized by high power semiconductor laser alloying of equimolar ratio of Co, Cr, Al, Cu four elements mixture powder on the surface of single-element Fe base alloy Q235 steel. The microstructure, constituent phases, composition distribution and mechanical properties of FeCoCrAICu laser high entropy alloying coating were investigated by SEM, XRD, EDS and microhardness tester. Experimental results show that the principal element of Fe in the single-element base alloy Q235 substrate participates surface alloying process during the laser irradiation, forming FeCoCrAICu five principal high entropy alloy coating. The alloying coating is composed of simple bcc solid solution and the microstructure is mainly composed of typical dendritic structure. Intermediate phase σ with tetragonal structure merely appears near the interface between laser alloying coating and substrate. From the surface of high entropy alloying coating to substrate, it presents the gradual distribution of the mixing entropy from high entropy, medium entropy to low entropy. the microhardness of FeCoCrAICu laser high entropy alloying coating reaches 8.3 GPa, which is three times as much as that of the Q235 substrate.
来源 金属学报 ,2014,50(5):555-560 【核心库】
DOI 10.3724/sp.j.1037.2014.00006
关键词 单元素基合金 ; 激光合金化 ; FeCoCrAICu ; 高熵合金 ; 涂层
地址

沈阳工业大学材料科学与工程学院, 沈阳, 110870

语种 中文
文献类型 研究性论文
ISSN 0412-1961
学科 金属学与金属工艺
基金 国家自然科学基金项目 ;  辽宁省自然科学基金 ;  辽宁省沈阳市科技局项目
文献收藏号 CSCD:5141009

参考文献 共 20 共1页

1.  Wang W R. Intermetallics,2012,26:44 被引 93    
2.  Yeh J W. Adv Eng Mater,2004,6:299 被引 1048    
3.  Chuang M H. Acta Mater,2011,59:6308 被引 147    
4.  张勇. 非晶和高熵合金,2010:69 被引 2    
5.  Hsu C Y. Wear,2010,268:653 被引 45    
6.  Yeh J W. Mater Sci Forum,2007,560:1 被引 38    
7.  Tang W Y. Metall Mater Trans, A,2012,43:2390 被引 3    
8.  陈敏. 多主元高熵合金AlTiFeNiCuCr_x微观结构和力学性能. 金属学报,2007,43:1020 被引 33    
9.  Zhang H. Mater Des,2011,32:1910 被引 44    
10.  Wen L H. Intermetallics,2009,17:266 被引 24    
11.  张晖. 激光熔覆FeCoNiCrAl_2Si高熵合金涂层. 金属学报,2011,47:1075 被引 36    
12.  Huang C. Mater Des,2012,41:338 被引 47    
13.  Zhang H. Appl Surf Sci,2011,257:2259 被引 46    
14.  Tsau C H. Intermetallics,2001,9:1085 被引 1    
15.  Assadi H. Acta Mater,2006,54:2793 被引 2    
16.  Zhang S. Trans Nonferrous Met Soc,2001,11:838 被引 5    
17.  张春华. 6061Al合金表面激光熔覆Ni基合金的组织及性能. 稀有金属材料与工程,2005,34:701 被引 26    
18.  张松. Ti6Al4V表面激光熔覆原位自生TiC颗粒增强钛基复合材料及摩擦磨损性能. 金属学报,2001,37:315 被引 44    
19.  Qiu X W. J Alloys Compd,2013,549:195 被引 50    
20.  Swalin R A. Thermodynamics of Solid. 2nd ed,1991:21 被引 2    
引证文献 13

1 霍文燚 熔覆电流对氩弧熔覆FeCrNiCoMn高熵合金涂层组织及显微硬度的影响 金属热处理,2014,39(9):45-47
被引 4

2 罗新民 激光冲击诱导的航空铝合金表层高熵结构及其抗蚀性 金属学报,2015,51(1):57-66
被引 6

显示所有13篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号