基于不同循环特性吸收剂的直接制氢过程比较
COMPARISON OF DIRECTLY PRODUCTING HYDROGEN PROCESSES BASED ON SORBENTS WITH DIFFERENT CYCLIC CHARACTERISTICS
查看参考文献9篇
|
文摘
|
基于化石能源直接制氢中吸收剂的不同循环特性,分析由于石灰石和白云石循环特性差异导致的制氢过程中物流量和系统热平衡的变化,确定不同循环特性的吸收剂对整个制氢系统的热力学影响。研究结果表明,若加入同质量的吸收剂,过程A后续循环中CO_2吸收不彻底,氢的含量持续降低,且气化器无法自身实现热平衡,过程B循环反应较稳定,吸收反应不完全,氢的含量较低,系统同样无法实现热平衡,过程C吸收剂的有效吸收成分(CaO)足量,系统可很好地实现热平衡,产物中氢的含量较高,但循环于系统中的惰性成分(MgO)的量较多,系统操作较困难,增加了系统的能量消耗。 |
|
其他语种文摘
|
Based on the different cyclic characteristics of the Ca-based CO_2 sorbents in directly-producing hydrogen from fossil energy, three processes for hydrogen production were presented and the mass flow rate and the thermal equilibrium were analyzed to determine the effect of the different sorbents to the system. The research results showed that if dolomite and limestone with same quality are used in the hydrogen production process A and process B. CO_2 is absorbed incompletely in the subsequent cycle of process A, making considerable reduction of H_2 content, the reactor can not achieve thermal equilibrium itself and need outside heat source for heating in the process A ; B cycle is relatively stable, but has the similar results with the process A. The effective absorbent (CaO) is sufficient in process C,and the system can achieve a good thermal equilibrium,and the hydrogen content is high in the production. However, there are more inert components (MgO) circulating in the system, which increase the energy consumption. |
|
来源
|
太阳能学报
,2014,35(4):731-736 【核心库】
|
|
关键词
|
制氢
;
CO_2吸收剂
;
循环特性
;
系统模拟
|
|
地址
|
1.
北方工业大学建筑工程学院, 北京, 100144
2.
中国科学院工程热物理研究所, 北京, 100080
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0254-0096 |
|
学科
|
能源与动力工程 |
|
基金
|
国家863计划
|
|
文献收藏号
|
CSCD:5132182
|
参考文献 共
9
共1页
|
|
1.
肖云汉. 煤制氢零排放系统.
工程热物理学报,2001,22(1):13-15
|
被引
27
次
|
|
|
|
|
2.
Han C. Multicycle performance of a single-step process for H2 production.
Separation Science and Technology,1997,32(14):681-697
|
被引
7
次
|
|
|
|
|
3.
Shimizu T. A twin fluidbed reactor for removal of C02 from combustion process.
Transactions of the Institution of Chemical Engineers,1999,77(A):62-68
|
被引
42
次
|
|
|
|
|
4.
Lin S Y. Developing an innovative method, HyPr-Ring, to produce hydrogen from hydrocarbons.
Energy Conversion & Management,2002,43(9/12):1283-1290
|
被引
31
次
|
|
|
|
|
5.
Johnsen K. Sorptionenhanced steam reforming of methane in a fluidized bed reactor with dolomite as C02 accept.
Chemical Engineering Science,2006,61(4):1191-1198
|
被引
18
次
|
|
|
|
|
6.
乔春珍. 生物质一步制氢的热力学分析及实验研究.
太阳能学报,2007,28(1):91-96
|
被引
2
次
|
|
|
|
|
7.
王琳. 一种低电耗制氢的新工艺研究(Ⅰ).
太阳能学报,2005,26(2):235-239
|
被引
2
次
|
|
|
|
|
8.
乔春珍. 钙基CO_2吸收剂的循环特性.
化工学报,2006,57(12):2953-2958
|
被引
15
次
|
|
|
|
|
9.
乔春珍. 不同钙基CO_2吸收剂的循环特性研究.
燃料化学学报,2010,38(4):478-482
|
被引
5
次
|
|
|
|
|
了解气象卫星更多信息，请访问