帮助 关于我们

返回检索结果

Bainite Transformation of Low-carbon and Boron-containing Steel under Continuous Cooling

查看参考文献15篇

文摘 The effects of deformation temperature and strain on bainite transformation of low carbon steel and boron-containing steel were investigated under continuous cooling conditions by means of dilatometric measurement and microstructure observation. The results show that with decreasing the deformation temperature from 1000 to 800 ℃ and increasing strains, bainite start temperature for boron-containing low carbon steel increases, whereas it decreases for low carbon steel under the same condition. The bainite microstructures are easily obtained for boron-containing steel deformed at different temperatures and different strains compared with plain low carbon steel. With increasing the continuous cooling rate, the bainite start temperature under deformed condition is about 20 ℃ higher than that under undeformed condition for boron-containing steel, but it changes slightly when the cooling rate is 20 ℃/s or more.
来源 Journal of Iron and Steel Research , International,2014,21(3):359-363 【核心库】
DOI 10.1016/s1006-706x(14)60055-8
关键词 bainite start temperature ; boron-containing steel ; phase transformation ; bainite
地址

Institute of Metallurgical Resources and Environmental Engineering, Northeastern University, Liaoning Key Laboratory of Metallurgical Resources Circulation Science, Liaoning, Shenyang, 110819

语种 英文
文献类型 研究性论文
ISSN 1006-706X
学科 冶金工业
基金 国家863计划
文献收藏号 CSCD:5097721

参考文献 共 15 共1页

1.  Ohtani H. Metall. Mater. Trans. A,1990,21:877-888 被引 18    
2.  Yamamoto S. ISIJ Int,1995,35:1020-1026 被引 9    
3.  Djahazi M. Mater. Sci. Tech,1992,8:628-636 被引 5    
4.  Ohmori Y. Scripta Mater,2002,47:201-206 被引 3    
5.  Muddle B C. Scripta Mater,2002,47:187-192 被引 2    
6.  Shang C J. Acta Metall. Sin,2005,41:471-476 被引 1    
7.  Zhao Y T. Acta Metall. Sin,2006,42:54-58 被引 1    
8.  Shang C J. Acta Metall. Sin,2008,44:287-291 被引 2    
9.  Rodrigues P C M. Mater. Sci. Eng. A,2000,283:136-143 被引 51    
10.  Jun H J. Mater. Sci. Eng. A,2006,422:157-162 被引 47    
11.  Liu D. Acta Metall. Sin,1999,35:816-822 被引 1    
12.  Liu D L. Acta Metall. Sin,1999,35:923-927 被引 1    
13.  Garlipp W. J. Mater. Process. Technol,2001,114:71-74 被引 4    
14.  Tsuji N. ISIJ Int,1997,37:797-806 被引 4    
15.  Yin S B. J. Iron Steel Res. Int,2010,17(2):43-47 被引 4    
引证文献 1

1 徐彬 1 200 MPa 级HSLA 钢的SH-CCT 曲线及其热影响区组织与性能 材料科学与工艺,2016,24(3):28-33
被引 2

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号