轻质金属点阵夹层板热屈曲临界温度分析
THERMAL BUCKLING AND ITS CRITICAL TEMPERATURE ANALYSIS OF SANDWICH PANELS WITH METAL-TRUSS CORE
查看参考文献10篇
文摘
|
论文针对均匀温度场下四边简支和四边固支金属点阵夹层板的临界热屈曲温度进行了求解和参数影响分析.将点阵夹芯等效为均匀连续体,并且将夹层板的剪切刚度近似为点阵夹芯的抗剪切刚度,忽略夹芯的抗弯刚度且认为夹层板主要由面板来提供抗弯刚度.对于无法获得解析解的四边固支条件,通过对未知变量进行双傅里叶展开的方法求解了Ressiner夹层板模型的临界屈曲温度,理论分析结果与有限元计算结果吻合良好.进一步分析了不同边界条件、点阵胞元构型、点阵材料相对密度、面板厚度等对临界屈曲温度的影响规律. |
其他语种文摘
|
Using Ressiner model and assuming the truss core as a continuous material,a theoretical analysis and parametric discussion about the thermal buckling of sandwich panels with metal truss core under clamped/simply-supported boundary conditions and uniform thermal loading are presented.For simplicity, the flexural rigidity and bending stiffness of the core are ignored,and the shear stiffness of the core is assumed to be the same as the shear stiffness of the sandwich panel.By using the double Fourier expansion of the virtue deformation mode,the critical temperature of sandwich panels under clamped boundary is obtained, which shows good agreement with those of the finite element analysis.Then,the influences of the cell configuration of lattice-framed truss cores,the relative density of truss cores,and panel thickness on the critical buckling temperature are analyzed carefully. |
来源
|
固体力学学报
,2014,35(1):1-7 【核心库】
|
关键词
|
点阵材料
;
夹层板
;
Ressiner模型
;
热屈曲
;
临界温度
|
地址
|
中国科学院力学研究所, 中国科学院流固耦合系统力学重点实验室, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0254-7805 |
学科
|
力学;一般工业技术 |
基金
|
国家自然科学基金
|
文献收藏号
|
CSCD:5086763
|
参考文献 共
10
共1页
|
1.
Mossavaral A. Thermoelastic buckling of plates with imperfections based on a higher order displacement field.
Journal of Thermal Stress,2002,25:745-771
|
被引
1
次
|
|
|
|
2.
Zakeri A A. An analytical study on postbuckling behavior of imperfect sandwich panels subjected to uniform thermal stress.
Thin-Walled Structures,2006,44:344-353
|
被引
1
次
|
|
|
|
3.
Kant T. Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models.
Composite Structures,2000,49:77-85
|
被引
3
次
|
|
|
|
4.
付宝连.
弹性力学中的能量原理及其应用,2004
|
被引
9
次
|
|
|
|
5.
钟万勰. 复合材料力学的Hamilton体系和辛几何方法(Ⅰ)-一般原理.
应用数学和力学,1992,13:971-975
|
被引
2
次
|
|
|
|
6.
徐新生. 哈密顿体系下的弹性圆板热屈曲问题.
大连理工大学学报,2008,48:1-4
|
被引
2
次
|
|
|
|
7.
Chen J W. Virbration and buckling of truss core sandwich plates on an elastic foundation subjected to biaxial in plane loads.
CMC-Computers Materials &Continua,2011,24:163-181
|
被引
3
次
|
|
|
|
8.
中科院力学研究所.
夹层板壳的弯曲稳定和振动,1977
|
被引
6
次
|
|
|
|
9.
Deshpande V S. Effective properties of the octet-truss lattice material.
Journal of Mechanics and Physics of Solids,2001,49:1747-1769
|
被引
84
次
|
|
|
|
10.
Kabir H R H. Free vibration of clamped moderately thick arbitrarily laminated plates using ageneralized naviers approach.
Journal of Sound and Vibration,1994,171:397-410
|
被引
2
次
|
|
|
|
|