Ⅰa型褐色金刚石高温高压改色研究进展
Research Progress in Color Treatment of Ⅰa Type Brown Diamond under High Temperature and High Pressure Conditions
查看参考文献61篇
|
文摘
|
Ⅰa型金刚石是世界上最重要的金刚石种类,约占金刚石总量的98%。利用大腔体压机通过优化温度、压力和时间等因素改善工业用途的Ⅰa型褐色金刚石的体色,是提高其经济价值并满足日益加剧的彩色金刚石市场需求的重要技术手段。但由于受金刚石原料的来源及实验技术条件的限制导致国内高温高压环境下对褐色金刚石的改色处理进展缓慢,并且改色后的金刚石很难达到宝石级别。本文对自20世纪60年代以来国内外对Ⅰa型金刚石高温高压(HTHP)改色处理的研究及所取得的成果进行了总结。已有的研究显示,在伴有塑性变形的基础上,不同结构的杂质氮是主要的致色元素。根据高温高压环境下Ⅰa型褐色金刚石内部杂质氮反应原理以及动力学机理,提出只要设计合理的样品组装方式以及恰当的改色处理所需的温压条件,我国普遍使用的六面顶压机同样具备对Ⅰa型褐色金刚石进行商业化改色处理的潜力。 |
|
其他语种文摘
|
Type Ⅰa diamonds are the most important diamonds in the world, accounting for approximate 98% of the natural diamonds. The body color of type Ⅰa brown diamonds can be enhanced through optimizing the operational factors of large-volume press such as temperature, pressure and time. Thus, high temperature and high pressure (HTHP) treatment is an important technical approach for obtaining colored diamonds to increase their economic value and meet the needs of the market. However, only slow progress has been made in the HTHP research of brown diamonds in China, because of the limited sources and experimental conditions. Few diamonds of type Ⅰa can reach the gem grade after HTHP treatment. In this paper, the domestic and international achievements of type Ⅰa diamonds under HTHP treatment are reviewed since the 1960s. Previous researches showed that the plastic deformation and the different structure of nitrogen impurity in diamonds are the major factors affecting colour alteration process of the type Ⅰa diamonds. According to the reaction principle and kinetic mechanism of internal nitrogen impurity in the type Ⅰa diamonds under HTHP conditions, with reasonable design for assembly and proper temperature-pressure conditions, the widely used cubic-anvil apparatus in china should have the potential to improve the color of typeⅠa diamonds. |
|
来源
|
矿物学报
,2014,34(1):53-59 【核心库】
|
|
关键词
|
Ia型褐色金刚石
;
高温高压实验
;
改色处理
;
六面顶压机
|
|
地址
|
中国科学院地球化学研究所, 中国科学院地球内部物质高温高压重点实验室, 贵州, 贵阳, 550002
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
1000-4734 |
|
学科
|
地质学 |
|
文献收藏号
|
CSCD:5081343
|
参考文献 共
61
共4页
|
|
1.
买潇. 钻石高温高压处理技术.
宝石和宝石学杂志,2004,6(4):22-24
|
被引
2
次
|
|
|
|
|
2.
黄宣镇. 世界金刚石矿产分布概况.
中国非金属矿工业导刊,2002(6):29-31
|
被引
2
次
|
|
|
|
|
3.
李海波.
山东蒙阴褐色金刚石的显微塑性变形特征研究,2006
|
被引
1
次
|
|
|
|
|
4.
于万里. Ia型天然金刚石结构缺陷的同步辐射形貌研究.
功能材料,2001,32(6):664-666
|
被引
2
次
|
|
|
|
|
5.
王新民.
钻石,2012
|
被引
2
次
|
|
|
|
|
6.
杨明星. 湖南金刚石的红外光谱研究.
宝石和宝石学杂志,2000,2(4):29-32
|
被引
10
次
|
|
|
|
|
7.
Wayne R. Kineties of Ib to IaA nitrogen aggregation in diamond.
Geochimica et Cosmochimica. Acta,1996,60(23):4725-4733
|
被引
1
次
|
|
|
|
|
8.
.
D-Screen Identification of synthetic and HPHT treated diamonds
|
被引
1
次
|
|
|
|
|
9.
殷小玲. 金刚石颜色成因探讨.
超硬材料工程,2007,19(2):53-56
|
被引
3
次
|
|
|
|
|
10.
Nassau K.
Gemstone enhancement -history, science and state of the art, 2nd Edition,1994
|
被引
1
次
|
|
|
|
|
11.
Cannon P.
Method for and product by the introduction of aluminium atoms into the surface of diamond crystals, US: 3, 134,739,1964
|
被引
1
次
|
|
|
|
|
12.
Wentorf R H J.
Method and product produced by the introduction of boron atoms into the surface of diamond crystals, US: 3, 141, 855,1964
|
被引
1
次
|
|
|
|
|
13.
Nikitin A V. The effect of heat and pressure on certain physical properties of diamonds.
Soviet Physics Doklady,1969,13(9):842-844
|
被引
1
次
|
|
|
|
|
14.
Evans T. Changes in the defect structure of diamond due to high temperature high pressure treatment.
Proceedings of the Royal Society A: Mathematical Physical and Engineering Sciences,1975,344(1636):111-130
|
被引
1
次
|
|
|
|
|
15.
Strong H M.
Annealing type IB or mixed type IB-IA natural diamond crystal, US 4: 124, 690,1978
|
被引
1
次
|
|
|
|
|
16.
Strong H M.
Annealing synthetic diamond type IB, US 4: 174,380,1979
|
被引
1
次
|
|
|
|
|
17.
Evans T.
A method of reducing the color of diamond, EP: 0 014 528 A1,1980
|
被引
1
次
|
|
|
|
|
18.
Evans T.
Diamond treatment, US 4: 399, 364,1983
|
被引
1
次
|
|
|
|
|
19.
Tsuji K.
Method for converting IB type nitrogen in synthetic diamond single crystal to IA type nitrogen, JP: 63-291896 A,1989
|
被引
1
次
|
|
|
|
|
20.
Sato S.
Manufacture of diamond light emitting device., JP: 1-020689 A,1989
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问