基于主动轮廓方法提取雾化锥角
Spray angle tracking based on active contour method
查看参考文献18篇
文摘
|
基于主动轮廓方法(ACM)原理,将ACM 延伸开发应用到雾化锥角的测量领域.经过调试, ACM 成功捕捉到了雾锥边界以及喷雾矩在喷口后一定位置处出现的收缩特征,准确地获得了雾化锥角.验证结果显示:ACM 获得的雾化锥角数值与阴影法测量值之间的相对误差小于1.5%.基于ACM提取雾化锥角方法的应用可以在保证实验结果准确度的同时降低工程应用成本. |
其他语种文摘
|
Active contour model(ACM)was developed to track spray angle of atomizer. Through debugging and testing,ACM successfully captured the boundary of atomizer spray. The feature of spray contraction at downstream part of spray was also obtained,and spray angle was got exactly.The verification results show that,the relative errors between the spray angle values measured by the ACM tracking and the shadowgraph measurement are less than 1.5%.The ACM tracking spray angle can reduce cost of engineering applications with an identical measuring accuracy. |
来源
|
航空动力学报
,2014,29(2):284-289 【核心库】
|
DOI
|
10.13224/j.cnki.jasp.2014.02.006
|
关键词
|
雾化锥角
;
主动轮廓
;
燃烧室
;
喷嘴
;
喷雾测量
|
地址
|
1.
中国科学院工程热物理研究所, 中国科学院轻型动力重点实验室, 北京, 100190
2.
中国科学院大学, 机器人学国家重点实验室, 北京, 100039
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-8055 |
学科
|
能源与动力工程;航空 |
基金
|
国家自然科学基金
;
国家高技术研究发展计划
|
文献收藏号
|
CSCD:5059075
|
参考文献 共
18
共1页
|
1.
赵娜. 液体推进剂模拟工质在离心喷嘴内流动特性研究.
工程热物理学报,2011,32(12):2168-2172
|
被引
2
次
|
|
|
|
2.
刘定平. 基于“液包气”雾化的脱硫喷嘴特性实验.
动力工程学报,2012,32(9):693-732
|
被引
7
次
|
|
|
|
3.
方立军. 压力式喷嘴雾化性能的试验研究.
热能动力工程,2010,25(2):202-245
|
被引
8
次
|
|
|
|
4.
邓巍. 基于MATLAB的雾化图像处理及雾化角的测定.
西北农林科技大学学报:自然科学版,2006,34(7):155-159
|
被引
8
次
|
|
|
|
5.
金仁喜. 压力喷嘴常温下雾化特性实验研究.
海军工程大学学报,2012,24(3):52-56
|
被引
4
次
|
|
|
|
6.
史春建. 基于机器视觉的常温烟雾机喷雾角测量系统.
农业机械学报,2006,37(1):47-50
|
被引
1
次
|
|
|
|
7.
Kass M. Snakes:active contour models.
International Journal of Computer Vision,1987,1(4):321-331
|
被引
1080
次
|
|
|
|
8.
Chan T F. Active contours without edges.
IEEE Transactions on Image Processing,2001,10(2):266-277
|
被引
1028
次
|
|
|
|
9.
Mohanna F. An efficient active contour model through curvature scale space filtering.
Multimedia Tools and Applications,2003,21(3):225-242
|
被引
1
次
|
|
|
|
10.
Gout C. Segmentation under geometrical conditions using geodesic active contours and interpolation using level set methods.
Numerical Algorithms,2005,39(1/2/3):155-173
|
被引
6
次
|
|
|
|
11.
Mille J. Narrow band region-based active contours and surfaces for 2Dand 3Dsegmentation.
Computer Vision and Image Understanding,2009,113(9):946-965
|
被引
5
次
|
|
|
|
12.
Fereshteh S. A new active contour model based on the conscience,archiving and mean-movement mechanisms and the SOM.
Pattern Recognition Letters,2011,32(12):1622-1634
|
被引
1
次
|
|
|
|
13.
Drakopoulos K. Active contours on graphs: multiscale morphology and graphcuts.
IEEE Journal of Selected Topics in Signal Processing,2012,6(7):780-794
|
被引
1
次
|
|
|
|
14.
王岳. 利用主动轮廓算法提取火焰前锋.
燃烧科学与技术,2005,11(6):543-546
|
被引
6
次
|
|
|
|
15.
Abu-Gharbieh R. Flame front tracking by laser induced fluorescence spectroscopy and advanced image analysis.
Optics Express,2001,8(5):278-287
|
被引
3
次
|
|
|
|
16.
Sethian J A.
Level set methods and fast marching methods,1999
|
被引
35
次
|
|
|
|
17.
Adalsteinsson D. The fast construction of extension velocities in level set methods.
Journal of Computational Physics,1999,148(1):2-22
|
被引
43
次
|
|
|
|
18.
刘娟. 离心式喷嘴液膜破碎过程高速阴影试验研究.
中国工程热物理学会燃烧学学术会议,2010
|
被引
1
次
|
|
|
|
|