基于旋量动力学建模的可重构轮手一体机器人越障性能研究
Research on obstacle-negotiation performance of a reconfigurable wheel-manipulator robot based on screw's dynamics formulation
查看参考文献11篇
文摘
|
为研究可重构轮手一体机器人的越障性能,描述了机器人轮手复合越障过程,基于旋量理论建立了单模块可重构轮手一体移动机器人翻越台阶型障碍的动力学模型.对影响机器人电机力矩的三个因素——台阶高度、手臂长度和机器人运动参数进行了仿真,对越障过程中的稳定性进行了分析,得到了机器人的稳定工作域,最后通过实验得到机器人极限越障高度,为机器人结构的优化和越障性能的提升提供了理论依据. |
其他语种文摘
|
To study the obstacle negotiation capacity of reconfigurable wheel-manipulator robots, the combined wheel-ma-nipulator obstacle negotiation process was described, and based on the screw theory, the dynamic formulation of stair-climbing on a slope for reconfigurable wheel-manipulator robots was established by using the virtual mechanism method. Because of the diversity of configuration and the flexibility of motion, the dynamic formulation using conventional approaches is complex, moreover, it is difficult to expansion to multiple modules. Whereas adopting the screw theory, concise and unified description of complex mechanisms can be derived, and the Jacobian matrix is easily obtained by exponential product formula. Three factors affecting the motor torque mainly, such as stair height, arm length and kinematic parameters, were simulated, and the stability in the obstacle-negotiation process was analyzed and the result of stable working range was obtained. The maximum stair-height that the robot can negotiate was achieved by simulation and experiment. |
来源
|
高技术通讯
,2013,23(10):1053-1060 【扩展库】
|
关键词
|
旋量
;
可重构轮手一体机器人
;
越障
;
动力学
|
地址
|
中国科学院沈阳自动化研究所, 机器人学国家重点实验室, 沈阳, 110016
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1002-0470 |
学科
|
海洋学;自动化技术、计算机技术 |
基金
|
国家自然科学基金资助项目
|
文献收藏号
|
CSCD:5052121
|
参考文献 共
11
共1页
|
1.
Featherstone R.
Robot Dynamics Algorithms,1987:89-99
|
被引
1
次
|
|
|
|
2.
贺鑫元. 可重构星球探测机器人的机构设计.
机械工程学报,2005,41(12):190-195
|
被引
5
次
|
|
|
|
3.
Gustavo F. Kinematic reconfigurability of mobile robots on irregular Terrains.
Proceedings of 2009 IEEE International Conference on Robotics and Automation,2009:1340-1345
|
被引
1
次
|
|
|
|
4.
Murray R M.
A Mathematical Introduction to Robotic Manipulation,1994:39-45
|
被引
1
次
|
|
|
|
5.
于靖军.
机器人机构学的数学基础,2008:102-117
|
被引
1
次
|
|
|
|
6.
李永刚. 基于现代微分几何的机器人研究现状.
中国机械工程,2007,18(2):238-243
|
被引
6
次
|
|
|
|
7.
Featherstone R.
Robot dynamics,2007
|
被引
1
次
|
|
|
|
8.
贺鑫元. 可重构单体机器人动力学分析与控制.
中国机械工程,2005,16(21):1889-1894
|
被引
2
次
|
|
|
|
9.
田海波. 轮腿式机器人越障动力学建模与影响因素分析.
机器人,2010,32(3):390-397
|
被引
10
次
|
|
|
|
10.
McGhee R. On the stability properties of quadruped creeping gait.
Mathematical Bioscience,1968,3:331-351
|
被引
44
次
|
|
|
|
11.
Papadopoulos E G. A new measure of tipover stability margin for mobile manipulators.
Proceedings of 1996 IEEE International Conference on Robotics and Automation,1996:3111-3116
|
被引
17
次
|
|
|
|
|