一种机器人谐波减速器内嵌扭矩传感器的研制
Development of a built-in torque sensor in harmonic drive gears for robots
查看参考文献21篇
文摘
|
针对模块化可重构机器人对关节扭矩测量的需求,研制了一种内嵌于谐波减速器的扭矩传感器。基于二阶纹波模型,对谐波减速器的柔轮进行了应力应变分析。提出了一种基于矢量抵消原理的扭矩传感器设计方法,设计了一种基于三矢量抵消的扭矩传感器,使一、二阶纹波及更多阶纹波甚至所有其他高阶纹波都通过矢量叠加而抵消,且通过使用冗余应变片提高测量精度。分析了系统的输出与扭矩的关系,并进行了传感器误差分析。研制了扭矩传感器物理样机和测试平台,并进行了加载测试,结果表明,研制的扭矩传感器具有较高的灵敏度和精度,精度与波发生器的转动有相关性。 |
其他语种文摘
|
To meet the demand of joint torque measurement for a modular reconfigurable robot,a built-in torque sensor in harmonic drive gear was developed. Bas on the two-order ripple model,the stress and strain of the flexspline in the harmonic drive gear were analyzed. A vector-added-and-cancelled-out-principle based torque sensor design method was proposed,and a three-vector-added-and-cancelled-out-based torque sensor was designed. The torque sensor cancels out the first order,the second order,and even all the other higher order ripples through ripple vector addition.The redundant stain gauges were employed to improve the measurement accuracy. The relationship between the output signal and the input torque was obtained,and the error analysis was given. A torque sensor prototype and a test bed were developed; and the loading experiments were conducted. The experimental results show that the torque sensor possesses high sensitivity and accuracy,and the accuracy has correlation with the wave generator rotation. |
来源
|
仪器仪表学报
,2014,35(1):154-161 【核心库】
|
关键词
|
关节模块
;
谐波减速器
;
扭矩传感器
;
矢量叠加
;
应变电桥
;
误差分析
|
地址
|
中国科学院沈阳自动化研究所, 机器人学国家重点实验室, 沈阳, 110016
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0254-3087 |
学科
|
机械、仪表工业;自动化技术、计算机技术 |
基金
|
国家863计划
;
国家自然科学基金
;
中国科学院沈阳自动化研究所机器人学重点实验室基金
|
文献收藏号
|
CSCD:5049523
|
参考文献 共
21
共2页
|
1.
吕洪波. 机器人修磨中融合先验知识的适应学习建模方法.
机器人,2011,33(6):641-648
|
被引
4
次
|
|
|
|
2.
于振中. 多自由度遥操作系统控制的波变量法.
信息与控制,2012,41(2):147-152
|
被引
3
次
|
|
|
|
3.
俞志伟. 基于三维力反馈的仿壁虎机器人单腿运动控制.
仪器仪表学报,2011,32(12):2674-2680
|
被引
7
次
|
|
|
|
4.
Albu-Schaffer A. Soft robotics.
IEEE Robotics & Automation Magazine,2008,15(3):20-30
|
被引
12
次
|
|
|
|
5.
黄云天. 基于碰撞检测的护理型操作臂的安全性设计与实现.
机器人,2011,33(1):40-45
|
被引
7
次
|
|
|
|
6.
Tsetserukou D. Torque sensors for robot joint control.
Sensors,Focus on Tactile,Force and Stress Sensors,2008:15-36
|
被引
1
次
|
|
|
|
7.
Vischer D. Design and development of high-performance torque controlled joints.
IEEE Transactions on Robotic and Automation,1995,11(4):537-544
|
被引
4
次
|
|
|
|
8.
Hashimoto M. A torque sensing technique for robots with harmonic drives.
IEEE Transactions on Robotics and Automation,1993,9(1):108-116
|
被引
4
次
|
|
|
|
9.
Godler I. Accuracy improvement of built-in torque sensing for harmonic drives.
IEEE/ASME Transactions on Mechatronics,2000,5(4):360-366
|
被引
5
次
|
|
|
|
10.
Hashimoto M. Velocity dependence of the characteristics of harmonic drive built-in torque sensing.
Proceedings of the 2000 IEEE International Conference on Robotics & Automation,2000:1334-1339
|
被引
1
次
|
|
|
|
11.
Taghirad H D. Intelligent built-in Torque sensor for harmonic drive systems.
IEEE Transactions on Instrumentation and measurement,1999,48(6):1201-1207
|
被引
5
次
|
|
|
|
12.
谢光辉. 扭矩嵌入检测的机器人关节伺服舵机研究.
自动化仪表,2010,7/31(7):26-28
|
被引
1
次
|
|
|
|
13.
Hashimoto M. Development of a torque sensing robot arm for interactive communication.
Proceedings of IEEE Int. Workshop on Robot and Human Interactive Communication,2002:344-349
|
被引
1
次
|
|
|
|
14.
Godler I. A method to compensate periodic errors by gain tuning in instrumentation.
IEEE Transactions on Instrumentation and Measurement,2002,51(1):37-42
|
被引
1
次
|
|
|
|
15.
Sensinger J W. Improved torque fidelity in harmonic drive sensors through the union of two existing drive sensors through the union of two existing strategies.
IEEE/ASME Transactions on Mechatronics,2006,11(4):457-461
|
被引
5
次
|
|
|
|
16.
Liu G J. Distributed control of modular and reconfigurable robot with torque sensing.
Robotica,2008,26:75-84
|
被引
4
次
|
|
|
|
17.
Godler I. Performance of gain-tuned harmonic drive torque sensor under load and speed conditions.
IEEE/ASME Transactions on Mechatronics,2001,6(2):155-160
|
被引
3
次
|
|
|
|
18.
Taghirad H D. Torque ripple and misalignment torque compensation for the built-in torque sensor of harmonic drive system.
IEEE Transactions on Instrumentation and Measurement,1998,47(1):309-315
|
被引
2
次
|
|
|
|
19.
Pan X A. Automatic kinematic modelling of a modular reconfigurable robot.
Transactions of the Institute of Measurement and Control
|
被引
1
次
|
|
|
|
20.
姜勇. 模块化可重构机器人的构形在线自主辨识.
机械工程学报,2011,47(15):17-24
|
被引
6
次
|
|
|
|
|