面向高质量加工的NURBS曲线插补算法
NURBS Interpolation Algorithm for High-Quality Machining
查看参考文献13篇
文摘
|
通过分析数控系统加工时常用的插补算法的特点,提出一种基于NURBS曲线的插补算法.该算法包括速度规划和实时插补两部分:速度规划部分考虑了工件加工时允许的最大轮廓误差,以保证高速运行过程中加速度的连续,使机床运行平稳,避免产生大的冲击;实时插补部分应用弦截法计算插补参数,能将实时插补产生的速度波动控制到理想水平,进一步减小了机床震颤.仿真实验结果表明,文中算法能够减小机床振动,实现高质量加工. |
其他语种文摘
|
Through analyzing the characteristics of commonly used interpolation algorithms in the computer numerical control (CNC) system, a novel real-time NURBS interpolation algorithm is proposed. The algorithm includes velocity planning and real-time interpolation. The velocity planning module considers the maximum contour errors during the machining of workpieces to ensure the continuous acceleration of the process of high-speed operation, which enables the CNC machine tools to run smoothly and avoids intense vibration in high speed CNC machining. The real-time interpolation module uses the secant iteration method to calculate the interpolation parameters, which can dominate the feedrate fluctuation to ideal level and further reduce the tremor of the CNC machine tools. Simulation experimental results show that the NURBS interpolation algorithm proposed in the paper can reduce machine vibration and implement high-quality CNC processing. |
来源
|
计算机辅助设计与图形学学报
,2013,25(10):1549-1556 【核心库】
|
关键词
|
数控
;
NURBS插补
;
速度规划
;
弦截法
;
高质量加工
|
地址
|
中国科学院沈阳计算技术研究所总线实验室, 沈阳, 110168
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1003-9775 |
学科
|
自动化技术、计算机技术 |
基金
|
国家重大科技专项
|
文献收藏号
|
CSCD:4957669
|
参考文献 共
13
共1页
|
1.
Bedi S. Advanced interpolation techniques for N.C. machines.
Journal of Engineering for Industry,1993,115(3):329-336
|
被引
29
次
|
|
|
|
2.
Shpitalni M. Real-time curve interpolators.
Computer-Aided Design,1994,26(11):832-838
|
被引
53
次
|
|
|
|
3.
Yang D C H. Parametric interpolator versus linear interpolator for precision CNC machining.
Computer-Aided Design,1994,26(3):225-234
|
被引
35
次
|
|
|
|
4.
Cheng M Y. Real-time NURBS command generators for CNC servo controllers.
International Journal of Machine Tools and Manufacture,2002,42(7):801-813
|
被引
31
次
|
|
|
|
5.
Cheng C W. Accurate feedrate control of CNC machine tools along NURBS curves.
Proceedings of the 43rd IEEE Conference on Decision and Control. 3,2004:3053-3058
|
被引
1
次
|
|
|
|
6.
孙海洋. 一种参数曲线实时数控插补计算新方法.
国防科技大学学报,2008,30(3):122-127
|
被引
5
次
|
|
|
|
7.
孙海洋. CNC参数曲线实时插补进给速度控制方法.
中国机械工程,2008,19(17):2032-2036
|
被引
4
次
|
|
|
|
8.
Yeh S S. Adaptive-feedrate interpolation for parametric curves with a confined chord error.
Computer-Aided Design,2002,34(3):229-237
|
被引
77
次
|
|
|
|
9.
Cheng C W. Feedrate control for non-uniform rational B-spline motion command generation.
Journal of Engineering Manufacture,2006,220(11):1855-1861
|
被引
1
次
|
|
|
|
10.
Nam S H. A study on a generalized parametric interpolator with real-time jerk-limited acceleration.
Computer-Aided Design,2004,36(1):27-36
|
被引
32
次
|
|
|
|
11.
游有鹏. NURBS曲线高速高精度加工的插补控制.
计算机辅助设计与图形学学报,2001,13(10):943-947
|
被引
27
次
|
|
|
|
12.
.
ISO 14649/FDIS-2003 Data model for computerized numerical controllers
|
被引
1
次
|
|
|
|
13.
李庆扬.
数值分析,2003:155-160
|
被引
1
次
|
|
|
|
|