Interfacial reaction process of the hot-pressed WC/2024Al composite
查看参考文献16篇
|
文摘
|
12 vol%WC_p/2024Al composite was fabricated from mixed powders by hot-pressing at various temperatures. Investigation of the interfacial reaction between the WC phase and the Al alloy matrix was performed by X-ray diffraction (XRD), transmission electron microscope (TEM) and energy dispersive spectroscopy (EDS). A multiple layer interface structure, which is composed of Al/WAl_(12)/Al_4C_3/WC, is found to form by the interfacial reaction during hot-pressing. Further study shows that the Al_4C_3 layer forms along with a given crystal orientation of WC phase and might retard the interfacial reaction process. |
|
来源
|
Rare Metals
,2013,32(4):397-401 【核心库】
|
|
DOI
|
10.1007/s12598-013-0116-z
|
|
关键词
|
Metal-matrix composites (MMCs)
;
Interfacial reaction
;
Hot-pressing
|
|
地址
|
1.
School of Metallurgy and Materials, Northeastern University, Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Shenyang, 110004
2.
Advanced Electronic Materials Institute, General Research Institute for Nonferrous Metals, Beijing, 100088
|
|
语种
|
英文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-0521 |
|
学科
|
冶金工业 |
|
基金
|
supported by the Program for Changjiang Scholars and Innovative Research Teams in University (PCSIRT)
|
|
文献收藏号
|
CSCD:4942206
|
参考文献 共
16
共1页
|
|
1.
Hoseini M. Tensile properties of in situ aluminium-alumina composites.
Mater Lett,2005,59(27):3414
|
被引
4
次
|
|
|
|
|
2.
Zu L. Study on the powder mixing and semi-solid extrusion forming process of SiCp/2024Al composites.
J Mater Process Tech,2001,114(3):189
|
被引
1
次
|
|
|
|
|
3.
Ceschini L. Tensile and fatigue properties of the AA6061/20 vol% Al_2O_(3p) and AA7005/10 vol% Al_2O_(3p) composites.
Compos Sci Technol,2006,66(2):333
|
被引
12
次
|
|
|
|
|
4.
Shin D S. Effect of the processing methods on the formation of Al_4C_3 in SiCp/2024 Al composites.
Mater Res Bull,1997,32(9):1155
|
被引
3
次
|
|
|
|
|
5.
Lee J C. Prediction of Si contents to suppress the interfacial reaction in the SiCp/2014 Al composites.
Acta Mater,1998,46(8):2635
|
被引
7
次
|
|
|
|
|
6.
Noble B. Low-temperature interface reaction in aluminium-silicon carbide particulate composites produced by mechanical alloying.
J Mater Sci,1997,32(22):5969
|
被引
3
次
|
|
|
|
|
7.
Contreras A. Structural, morphological and interfacial characterization of Al-Mg/TiC composites.
Mater Charact,2007,58(8/9):685
|
被引
6
次
|
|
|
|
|
8.
Ren S B. Effect of controlled interfacial reaction on the microstructure and properties of the SiCp/Al composites prepared by pressureless infiltration.
J Alloy Comp,2008,455(1/2):424
|
被引
15
次
|
|
|
|
|
9.
Kim Y. Processing and interfacial bonding strength of 2014 Al matrix composites reinforced with oxidized SiC particles.
Mater Sci Eng A,2006,420(1/2):8
|
被引
5
次
|
|
|
|
|
10.
Wang L. Fracture behavior of aluminum borate whisker-reinforced aluminum alloy 6061 composite.
Mater Sci Eng A,2008,497(1/2):358
|
被引
6
次
|
|
|
|
|
11.
Badini C. Forging of 2124/SiCp composite.
J Mater Process Tech,2001,116(2/3):289
|
被引
3
次
|
|
|
|
|
12.
Tang F. Pure Al matrix composites produced by vacuum hot pressing: tensile properties and strengthening mechanisms.
Mater Sci Eng,2004,383(2):362
|
被引
1
次
|
|
|
|
|
13.
Wang L D. Effect of interfacial reaction on the thermal expansion behavior of β-eucryptite particle and aluminum borate whisker reinforced 6061 aluminum alloy composite.
Mater Sci Eng A,2002,336(1/2):110
|
被引
5
次
|
|
|
|
|
14.
Kainer K U. Metal matrix composites.
Custom-made Materials for Automotive and Aerospace Engineering,2006:356
|
被引
1
次
|
|
|
|
|
15.
Torraba J M. P/M aluminum composites: an overview.
J Mater Process Tech,2003,133(1/2):206
|
被引
44
次
|
|
|
|
|
16.
Liang Q S. Effects of powder hot-pressing process on mechanical properties of WCp/2024Al composites.
J Mater Eng,2011(12):63
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问