文摘
|
利用直线截点法计算各试样的奥氏体平均晶粒尺寸,得出82B高碳钢的奥氏体粗化温度为950℃,通过Thermo-calc热力学计算和能谱分析可知,晶粒粗化的主要原因是950℃时V、Ti、Nb碳氮化物数量的大大减少,即析出相粒子钉扎作用的减弱和消除。随着加热温度的升高和保温时间的延长,82B高碳钢奥氏体晶粒尺寸增大,其生长模型的公式为D=6.82×10~4t~(0.079)exp(-8.04×10~4/RT)。当加热温度为1000℃,保温时间为60~90 min时,82B原奥氏体晶粒尺寸小于67μm,晶粒细小均匀,且微合金元素V充分溶解在奥氏体中。 |
其他语种文摘
|
The austenite grain coarsening temperature of 82B high carbon steel is 950 ℃ by measuring average grain size with linear cut point method. The results of EDS analysis and thermodynamic calculation based on Thermo-calc show that the main reason of grain coarsening is that the quantity of carbonitrides of elements V,Ti and Nb is decreased heavily for the steel heating at 950 ℃,which means the pinning effect of the precipitated phase particles is weakened or eliminated. The average austenite grain size increases with the increasing of the heating temperature and the holding time,which can be described by the austenite grain growth model D = 6. 82 × 10~4 t~(0. 079) exp(- 8. 04 × 10~4 /RT). When the heating temperature is 1000 ℃ and the holding time is between 60 min and 90 min,the austenite grain size of 82B steel is uniform and smaller than 67 μm,and the micro-alloying element V is dissolved into austenite adequately. |
来源
|
材料热处理学报
,2013,34(7):41-46 【核心库】
|
关键词
|
82B
;
奥氏体晶粒
;
粗化温度
;
长大模型
|
地址
|
1.
北京科技大学, 钢铁冶金新技术国家重点实验室, 北京, 100083
2.
北京科技大学材料科学与工程学院, 北京, 100083
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1009-6264 |
学科
|
金属学与金属工艺 |
基金
|
中央高校基本科研业务费专项资金
|
文献收藏号
|
CSCD:4887560
|
|
1.
宋维锡.
金属学.(第2版),1989:322
|
被引
1
次
|
|
|
|
2.
彭建. 加热工艺对微合金钢Ti、Nb固溶及奥氏体晶粒长大的影响.
金属成形工艺,2003,21(6):51-53
|
被引
5
次
|
|
|
|
3.
苏德达. 奥氏体晶粒长大与晶界迁移.
金属制品,2004,30(5):51-54
|
被引
12
次
|
|
|
|
4.
柴国强.
82B高碳钢动态连续冷却转变及夹杂物塑性化控制研究,2009:8
|
被引
1
次
|
|
|
|
5.
程慧静. Nb-V复合非调质钢奥氏体晶粒长大行为.
金属热处理,2009,34(9):5-10
|
被引
8
次
|
|
|
|
6.
钟云龙. 新型油井管钢33Mn2V的奥氏体晶粒长大规律.
金属学报,2003,39(7):699-703
|
被引
31
次
|
|
|
|
7.
Zhang S S. The growth behavior of austenite grain in the heating process of 300M steel.
Materials Science and Engineering A,2011,528(15):4967-4972
|
被引
56
次
|
|
|