粉末性质对同轴送粉激光熔覆中粉末流场的影响规律
Effect of Powder Properties on the Convergence of Powder Stream in Coaxial Laser Cladding
查看参考文献17篇
|
文摘
|
在同轴送粉激光熔覆过程中,粉末流是影响熔覆质量的重要因素。为了提高粉末流的汇聚性,考察粉末性质对粉末流场的影响,建立了同轴送粉激光熔覆粉末流数值模型。模拟计算了NiCoCrAlY、ZrO_2、W三种典型粉末的粉末流形貌,并进行了粉末流的验证实验,实验结果与计算结果趋势吻合,说明模型具备合理性与可靠性。基于该模型,深入研究了粉末粒径、形状、密度和碰撞弹性恢复系数对粉末流汇聚的影响规律,在特定送粉工艺参数下,在粉末粒径增大时,汇聚焦距减小,汇聚浓度在一定粒径范围内达到最大值;在粉末形状系数或者密度增大时,汇聚焦距减小、汇聚浓度增大;在粉末颗粒的恢复系数减小时,汇聚焦距与汇聚浓度都增大。 |
|
其他语种文摘
|
The powder stream has an important influence on the quality of coating in coaxial laser cladding.In order to improve the convergence of powder stream,a numerical model of powder stream in coaxial laser cladding is developed based on a given coaxial nozzle.Simulations of three kinds of powder stream,including NiCoCrAlY,ZrO_2 ceramic powder and W powder,are calculated and validated by the experimental results.The effect of powder properties, including particle diameter,shape,density and restitution coefficient,on the convergence of powder stream is investigated.According to the calculated results with the same powder feeding parameters,as the particle diameter increases,the powder flow focal distance decreases,and the powder concentration reaches a maximum within some particle diameter scale.The powder concentration gets bigger and the powder flow focal distance becomes shorter with the powder shape factor or powder density increasing.As restitution coefficient decreases,both powder flow distance and powder concentration increase. |
|
来源
|
中国激光
,2013,40(5):0503008-1-0503008-9 【核心库】
|
|
关键词
|
激光技术
;
激光熔覆
;
数值模拟
;
粉末流
|
|
地址
|
中国科学院力学研究所, 中国科学院先进制造工艺力学重点实验室, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0258-7025 |
|
学科
|
金属学与金属工艺;电子技术、通信技术 |
|
基金
|
国家自然科学基金重点项目
;
面上项目
|
|
文献收藏号
|
CSCD:4856750
|
参考文献 共
17
共1页
|
|
1.
Dubourg L. Technological and scientific landscape of laser cladding process in 2007.
Surface & Coatings Technology,2008,202(24):5863-5869
|
被引
23
次
|
|
|
|
|
2.
Huang Yongjun. Characterization of dilution action in laserinduction hybrid cladding.
Opt. & Laser Technol,2011,43(5):965-973
|
被引
13
次
|
|
|
|
|
3.
Ehsan Toyserkani.
Laser Cladding,2005:1-40
|
被引
7
次
|
|
|
|
|
4.
靳晓曙. 激光制造中载气式同轴送粉粉末流场的数值模拟.
机械工程学报,2007,43(5):161-166
|
被引
21
次
|
|
|
|
|
5.
靳绍巍. 同轴送粉激光熔覆中粉末流对光束能量的衰减作用.
中国激光,2011,38(9):67-72
|
被引
6
次
|
|
|
|
|
6.
Tabernero I. Modelling of energy attenuation due to powder flow-laser beam ineraction during laser cladding process.
J. Materials Processing Technology,2012,212(2):516-522
|
被引
13
次
|
|
|
|
|
7.
Pinkerton Andrew J. An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition.
J. Phys. (D),2007,40(23):7323-7334
|
被引
7
次
|
|
|
|
|
8.
路桥潘. 载气式同轴送粉喷嘴的数值模拟及实验研究.
中国激光,2010,37(12):3162-3167
|
被引
11
次
|
|
|
|
|
9.
付伟. 同轴送粉喷嘴三路气流对粉末汇聚特性的影响.
中国机械工程,2011,22(2):220-226
|
被引
4
次
|
|
|
|
|
10.
朱刚贤. 沉积层结构对同轴送粉喷嘴粉末流场的影响规律.
中国激光,2010,37(6):1636-1642
|
被引
6
次
|
|
|
|
|
11.
Srdja Zekovi. Numerical simulation and experimental invesitgation of gas-powder flow from radially symmetrical nozzles in laser-based direct metal deposition.
International J. Machine Tools & Manufacture,2007,47(1):112-123
|
被引
1
次
|
|
|
|
|
12.
谭华. 激光立体成形粉末流输送的数值模拟研究.
中国激光,2011,38(10):46-53
|
被引
2
次
|
|
|
|
|
13.
Balu Prabu. Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process.
J. Materials Processing Technology,2012,212(7):1598-1610
|
被引
8
次
|
|
|
|
|
14.
武扬.
难熔金属激光熔覆工艺及涂层组织性能研究,2011:13-18
|
被引
1
次
|
|
|
|
|
15.
Tabernero I. Numerical simulation and experimental validation of powder flux distribution in coaxial laser cladding.
J. Materials Processing Technology,2010,210(15):2125-2134
|
被引
13
次
|
|
|
|
|
16.
Haider A. Drag coefficient and terminal velocity of spherical and nonspherical particles.
Powder Technology,1989,58(1):63-70
|
被引
117
次
|
|
|
|
|
17.
Du Wei. Computational fluid dynamics(CFD)modeling of spouted bed: influence of frictional stress, maximum packing limit and coefficient of restitution of particles.
Chemical Engineering Science,2006,61(14):4558-4570
|
被引
18
次
|
|
|
|
|
了解气象卫星更多信息，请访问