帮助 关于我们

返回检索结果

红外热像法快速确定45#钢的疲劳性能
On the Rapid Determination of 45# Steel Fatigue Behavior Based on Infrared Thermography

查看参考文献16篇

王青志   黄芳   丁桦 *  
文摘 红外热像法作为一种无损、实时及非接触的测试技术,在疲劳研究领域得到广泛的应用。该方法克服了传统试验方法周期长、所需试验试件和费用多的困难。本文利用红外热像仪测量了疲劳试验中45#钢试件表面温升变化,根据红外疲劳极限快测法得到疲劳极限,并由累积塑性功和塑性温升之间的相关假设,推导出了试件疲劳寿命的计算公式。试验结果表明,红外热像法可以快速、准确地确定材料的疲劳极限和S-N曲线。
其他语种文摘 As a non-destructive, real-time and non-contact testing technology, infrared thermography is widely applied in fatigue research area. This new method solves the problems of traditional test method, such as long cycle of experiment, huge amounts of specimen and high cost. Measurement of temperature variation on surface of 45# steel was carried out, the fatigue limit was established by rapid measuring method, and fatigue life equation was obtained by constructing relation between the accumulated plastic work and the plastic temperature rise.
来源 实验力学 ,2013,28(1):68-76 【核心库】
关键词 疲劳能量原理 ; 热耗散 ; 疲劳极限 ; S-N曲线
地址

中国科学院力学研究所, 北京, 100190

语种 中文
文献类型 研究性论文
ISSN 1001-4888
学科 力学
文献收藏号 CSCD:4826371

参考文献 共 16 共1页

1.  郭杏林. 疲劳热像法研究综述. 力学进展,2009,39(2):217-227 被引 12    
2.  童小燕. 疲劳能量方法研究回顾. 机械强度,2004,26(S):216-221 被引 13    
3.  姚磊江. 关于疲劳能量理论若干问题的讨论. 机械强度,2004,26(S):278-281 被引 8    
4.  王中光(译). 材料的疲劳. (第二版),1999 被引 2    
5.  Woodward R L. Direct measurement of temperature in high speed torsion test. Journal of Engineering Materials and Technology (Trans ASME),1987,109(2):140-145 被引 4    
6.  La Rosa G. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. International Journal of Fatigue,2000,22:65-73 被引 33    
7.  Curti G. Annalisa termite infrared stermicodella temperature limit in prove didactical. Proceedings of the 14th Conference on the Italian Society for Stress Analysis. 09,1986:211-220 被引 1    
8.  Luong M P. Infrared thermographic scanning of fatigue in metals. Nuclear Engineering and Design,1995,158:363-376 被引 20    
9.  Luong M P. Fatigue limit evaluation of metals using an infrared thermographic technique. Mechanics of Materials,1998,28:155-163 被引 35    
10.  Luong M P. Infrared thermovision of damage processes in concrete and rock. Engineering Fracture Mechanics,1990,35:291-301 被引 25    
11.  Luong M P. Introducing infrared thermography in soil dynamics. Infrared Physics & Technology,2007,49:306-311 被引 6    
12.  刘浩. 快速确定45钢疲劳极限的试验方法. 物理测试,2008,26(2):8-42 被引 2    
13.  闫志峰. 红外热像法预测镁合金的疲劳性能. 机械工程材料,2012,36(2):72-75 被引 4    
14.  郭杏林. 基于锁相热象法的金属疲劳特性评估方法研究. 机械强度,2009,31(2):1-7 被引 1    
15.  黄芳. 利用红外热像技术快速预测材料的S-N曲线. 实验力学,2009,23(3):45-51 被引 1    
16.  童小燕. 碳钢和合金钢的循环滞回能实验研究. 金属学报,1989,25(5):358-363 被引 1    
引证文献 2

1 张杰 拉-拉循环载荷下443铁素体不锈钢产热规律及疲劳性能预测 材料工程,2015,43(2):79-84
被引 0 次

2 冯恩升 全场热源分析方法及其在实验固体力学研究中的应用 实验力学,2019,34(1):95-104
被引 1

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号