帮助 关于我们

返回检索结果

钛合金微弧氧化一步制备含石墨的减摩涂层
One-step preparation of graphite-containing antifriction coating on Ti alloy by plasma electrolytic oxidation

查看参考文献16篇

穆明 1   梁军 2 *   肖乾 3   周新建 3  
文摘 为了进一步提高钛合金表面微弧氧化陶瓷涂层的摩擦磨损性能,在石墨分散的Na_2CO_3-Na_2SiO_3-KOH电解液溶液中一步制备了含自润滑微粒的微弧氧化复合涂层.利用X射线衍射仪(XRD)、X射线光电子能谱仪(XPS)和扫描电子显微镜(SEM)研究了未添加和添加石墨微弧氧化涂层的相组成和微结构,采用往复式球-盘试验机评价了两种涂层的摩擦学性能.结果表明:加入到电解液中的石墨在微弧氧化过程中进入到涂层中,从而得到含有固体润滑微粒的复合涂层;在干摩擦条件下,含石墨的微弧氧化涂层相比于不含石墨的涂层具有更小的摩擦系数.
其他语种文摘 One-step plasma electrolytic oxidation (PEO) process in a graphite-dispersed Na_2CO_3 - Na_2SiO_3 - KOH electrolyte was used to prepare a graphite-containing oxide composite coating on titanium alloy to improve the tribological property of the coating. The composition and microstructure of the oxide coatings produced in the Na_2CO_3 - Na_2SiO_3 - KOH electrolytes with and without addition of graphite particles were analyzed by X - ray diffractometer (XRD), X - ray photoelectron spectroscope (XPS) and scanning electric microscope (SEM). The tribological properties of the oxide coatings were evaluated using a reciprocating ball-on-disk tribometer. Results show that the graphite-containing oxide composite coating can be successfully produced on titanium alloy in the graphite-dispersed electrolyte using PEO process. The graphite-containing oxide coating has lower friction coefficient than the oxide coating without graphite under dry sliding condition.
来源 材料科学与工艺 ,2013,21(1):18-23 【核心库】
关键词 微弧氧化 ; 钛合金 ; 氧化涂层 ; 石墨 ; 摩擦磨损
地址

1. 中国科学院兰州化学物理研究所, 固体润滑国家重点实验室;;载运工具与装备教育部重点实验室, 兰州, 730000  

2. 中国科学院兰州化学物理研究所, 固体润滑国家重点实验室, 兰州, 730000  

3. 华东交通大学, 载运工具与装备教育部重点实验室, 南昌, 330013

语种 中文
文献类型 研究性论文
ISSN 1005-0299
学科 机械、仪表工业
基金 国家自然科学基金项目 ;  江西省研究生创新专项基金 ;  中国科学院“百人计划”项目
文献收藏号 CSCD:4799506

参考文献 共 16 共1页

1.  Miller P D. Friction and wear properties of titanium wear. Wear,1958,2:133-140 被引 5    
2.  Vangolu Y. Wear properties of micro arc oxidized and hydrothermally treated Ti6Al4V alloy in simulated body fluid. Wear,2011,271:2322-2327 被引 8    
3.  Song H J. Surface characteristics and bioactivity of oxide films formed by anodic spark oxidation on titanium in different electrolytes. Journal of Materials Processing Technology,2009,209:864-870 被引 3    
4.  Ye Yinping. An investigation of friction and wear performances of bonded molybdenum disulfide solid film lubricants in fretting conditions. Wear,2009,266:859-864 被引 10    
5.  Gangopadhyay S. Effects of deposition conditions and counter bodies on the tribological properties of pulsed DC magnetron sputtered TiN-MoSx composite coating. Tribology Letters,2009,37(3):487-496 被引 2    
6.  Morks M F. Splat morphology and microstructure of plasma sprayed cast iron with different preheat substrate temperatures. Journal of Thermal Spray Technology,2002,11(2):226-232 被引 7    
7.  Rampon R. Influence of suspension characteristics on coatings microstructure obtained by suspension plasma spraying. Surface & Coating Technology,2008,202:4337-4342 被引 6    
8.  Yang Yuling. Phase constituents and mechanical properties of laser in-situ synthesized TiCN/TiN composite coating on Ti-6Al-4V. Surface & Coatings Technology,2010,205:620-624 被引 2    
9.  Nie X. Abrasive wear /corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis. Surface& Coatings Technology,2002,149(2/3):245-251 被引 71    
10.  Wang Y M. Microarc oxidation and spraying graphite duplex coating formed on titanium alloy for antifriction purpose. Applied Surface Science,2005,246:214-221 被引 12    
11.  Martini C. PEO layers obtained from mixed aluminate-phosphate baths on Ti - 6Al - 4V: Dry sliding behaviour and influence of a PTFE Topcoat. Wear,2010,269:747-756 被引 13    
12.  Wu Xiaohong. Self-lubricative coating grown by micro-plasma oxidation on aluminum alloys in the solution of aluminate-graphite. Applied Surface Science,2008,254:6395-6399 被引 4    
13.  Hou Y Q. Tribological performances of diamond film and graphite /diamond composite film. Wear,2002,253:711-719 被引 2    
14.  Fu L M. Analysis of electroosmotic flow with step change in zeta potential. Journal of Colloid and Interface Science,2003,258:266-275 被引 4    
15.  Kim K H. Electrochemical surface modification of titanium in dentistry. Dent Mater J,2009,28(1):20-29 被引 4    
16.  汪一麟(译). 摩擦磨损原理,1982 被引 1    
引证文献 11

1 李青彪 超声辅助微弧氧化的含石墨复合膜的组织结构及摩擦学性能 材料保护,2014,47(8):7-9,14
被引 1

2 杨文斌 碳钢表面微弧氧化膜的制备及摩擦磨损性能研究 摩擦学学报,2015,35(3):328-334
被引 2

显示所有11篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号