异种不锈钢激光焊接相结构变化对腐蚀特性的影响
Effects of microstructure change on corrosion resistance of dissimilar stainless steel joint by laser welding
查看参考文献18篇
|
文摘
|
为了研究异种材料焊缝的耐腐蚀性能, 对316L与304不锈钢进行了激光焊接。通过组织观察和XRD技术检测了母材及焊缝微区的组织结构, 采用动电位极化的方法测试了316L和304奥氏体不锈钢及其激光对接焊缝的耐腐蚀性能, 并分析了焊缝耐腐蚀性提高的原因。结果表明, 在室温3.5%NaCl溶液中, 焊缝及母材的腐蚀均以点腐蚀为主, 且点蚀基本在晶界处萌生, 焊缝的耐腐蚀性相对母材有了明显的提高;激光焊缝组织的晶粒尺寸较母材明显细化, 相成分以奥氏体为主, 有明显的择优生长取向, 且奥氏体含量相对母材有所增加, 这种相结构特征的变化是焊缝耐腐蚀性提高的主要原因。 |
|
其他语种文摘
|
In order to study the corrosion resistance of dissimilar material weld, butt weld joint of 316L and 304 austenitic stainless steel was prepared by laser welding. The microstructure and phases of the weld joint were investigated by optical microscope and X-ray diffraction. The electrochemical corrosion behavior of the dissimilar metal weld joint and two base materials was studied by potentio dynamic polarization test in 3. 5% NaCl solution at room temperature. Results show that pitting mainly at grain boundary and the weld exhibits better corrosion resistance in 3. 5% NaCl solution compared with base metals. At the same time, the weld has more refined grains, the amount of austenite is increased and the preferential growth of austenite is obvious in weld, which is the main reason for enhancing electrochemical corrosion resistance. |
|
来源
|
材料热处理学报
,2013,34(2):72-76 【核心库】
|
|
关键词
|
奥氏体不锈钢
;
激光焊接
;
异种焊缝
;
电化学腐蚀
|
|
地址
|
中国科学院力学研究所, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1009-6264 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家自然科学基金重点项目
|
|
文献收藏号
|
CSCD:4789882
|
参考文献 共
18
共1页
|
|
1.
李亚江.
异种难焊材料的焊接及应用,2004
|
被引
28
次
|
|
|
|
|
2.
Mathieu A. Dissimilar material joining using laser.
Optics & Laser technology,2007,39:652-661
|
被引
63
次
|
|
|
|
|
3.
Katayama S. Laser welding of aluminum alloys and dissimilar metals.
Weld Int,2004,18(8):618-625
|
被引
5
次
|
|
|
|
|
4.
Kreimeyer M. Laser processing of aluminum titanium tailored blanks.
Optics & and Lasers in Engineering,2005,43(9):1021-1035
|
被引
21
次
|
|
|
|
|
5.
樊湘芳. 激光熔凝对1Cr18Ni9Ti焊接接头组织和性能的影响.
材料热处理学报,2009,30(4):61-64
|
被引
3
次
|
|
|
|
|
6.
Torkamany M. Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd: YAG pulsed laser.
Materials & Design,2010,31:458-465
|
被引
44
次
|
|
|
|
|
7.
Qi Xiaodong. Interfacial structure of the joints between magnesium alloy and mild steel with nickel as interlayer by hybrid laser-TIGwelding.
Materials & Design,2010,31:605-609
|
被引
14
次
|
|
|
|
|
8.
李长义. 激光焊接齿科CoCr-NiCr异种合金组织结构研究.
材料热处理学报,2007,28(1):22-25
|
被引
1
次
|
|
|
|
|
9.
Yao Chengwu. Interface microstructure and mechanical properties of laser welding copper-steel dissimilarjoint.
Optic & Laser in Engineering,2009,47:807-814
|
被引
16
次
|
|
|
|
|
10.
Bala Srinivasan P. Microstructural and electrochemical characterization of a thin-section dissimilar stainless steel weld joint.
Materials Chemistry & Physics,2009,115(1):179-184
|
被引
1
次
|
|
|
|
|
11.
Corral J. Corrosion of friction-stir welded aluminum alloys 2024 and 2195.
Journal of Materials Science Letters,2000,19:2117-2122
|
被引
12
次
|
|
|
|
|
12.
龚利华. 焊接及热处理工艺对0Cr18Ni9Ti不锈钢耐蚀性的影响.
金属热处理,2009,34(6):90-93
|
被引
8
次
|
|
|
|
|
13.
魏延鹏.
304及316L不锈钢激光焊接件力学性能试验研究,2010
|
被引
2
次
|
|
|
|
|
14.
陈玉华. 超薄不锈钢片微激光焊接的焊缝成形.
金属热处理,2008,33(10):95-98
|
被引
9
次
|
|
|
|
|
15.
Yan Jun. Study on microstructure and mechanical properties of 304 stainless steel joints by TIG,laser and laser-TIG hybrid welding.
Optics & Laser in Engineering,2010,48:512-517
|
被引
23
次
|
|
|
|
|
16.
林鑫. 激光快速成形过程中316L不锈钢显微组织的演变.
金属学报,2006,42(4):361-368
|
被引
50
次
|
|
|
|
|
17.
曹楚南.
腐蚀电化学原理,2008
|
被引
87
次
|
|
|
|
|
18.
Taban E. Laser welding of modified 12% Cr stainless steel: Strength,fatigue,toughness,microstructure and corrosion properties.
Materials and Design,2009,30:1193-1200
|
被引
6
次
|
|
|
|
|
了解气象卫星更多信息，请访问