Effect of electromagnetic swirling flow in slide-gate SEN on flow field in square billet continuous casting mold
查看参考文献29篇
文摘
|
In order to weaken the bias flow in the submerged entry nozzle (SEN) with slide-gate, the rotating magnetic field was imposed. The numerical method was employed to investigate the effect of rotating magnetic field on the flow field in the SEN and the mold under different slide-gate opening ratios. Numerical results showed that when the slide-gate opening ratio is smaller than 100%, the flow field in the SEN and the mold become asymmetry and there is an obvious circulation under the slidegate in the SEN. With increasing exciting current, the divergent angle of liquid steel at the SEN outlet increases, the impact depth of liquid steel in the mold decreases. With increasing slide-gate opening ratio, the impact depth of liquid steel in the mold increases and the required exciting current to weaken the bias flow should increase. |
来源
|
Acta Metallurgica Sinica(English Letters)
,2012,25(5):347-356 【核心库】
|
关键词
|
Square billet
;
Electromagnetic swirling flow
;
Slide-gate SEN
;
Continuous casting
;
Bias flow
|
地址
|
1.
North-eastern University, Key Laboratory of National Education Ministry for Electromagnetic Processing of Materials, Shenyang, 110819
2.
Northeastern University, State Key Laboratory of Rolling & Automation, Shenyang, 110819
|
语种
|
英文 |
ISSN
|
1006-7191 |
学科
|
冶金工业 |
基金
|
supported by the National High Technical Research and Development Programme of China
;
国家自然科学基金委员会-上海宝钢集团公司“钢铁联合研究基金”
;
国家自然科学基金
;
国家教育部高等学校学科创新引智计划项目
;
Fundamental Research Funds for the Central Universities
;
辽宁省博士启动基金
|
文献收藏号
|
CSCD:4667609
|
参考文献 共
29
共2页
|
1.
Liu H P.
ISIJ Int,2011,51(3):392
|
被引
8
次
|
|
|
|
2.
Wang Y F.
ISIJ Int,2010,50(12):1783
|
被引
5
次
|
|
|
|
3.
Ramirez-Lopez P E.
ISIJ Int,2010,50(12):1797
|
被引
4
次
|
|
|
|
4.
Alizadeh M.
ISIJ Int,2010,50(3):411
|
被引
3
次
|
|
|
|
5.
Lei H.
ISIJ Int,2009,49(10):1575
|
被引
4
次
|
|
|
|
6.
Ma J C.
ISIJ Int,2008,48(12):1722
|
被引
10
次
|
|
|
|
7.
Shamsi M R R I.
ISIJ Int,2007,47(3):433
|
被引
6
次
|
|
|
|
8.
Kubo N.
ISIJ Int,2007,47(7):988
|
被引
4
次
|
|
|
|
9.
Wang H M.
ISIJ Int,2005,45(9):1291
|
被引
7
次
|
|
|
|
10.
Takatani K.
ISIJ Int,2003,43(6):915
|
被引
8
次
|
|
|
|
11.
Kim D S.
ISIJ Int,2000,40(7):670
|
被引
10
次
|
|
|
|
12.
Su Z J.
Acta Metall Sin. (in Chinese),2010,46(4):479
|
被引
1
次
|
|
|
|
13.
Kholmatov S.
Steel Res Int,2008,79(1):31
|
被引
1
次
|
|
|
|
14.
Tsukaguchi Y.
Tetsu to Hagane,2007,93(9):575
|
被引
2
次
|
|
|
|
15.
Kholmatov S.
ISIJ Int,2007,47(1):80
|
被引
10
次
|
|
|
|
16.
Mcdavid R M.
Metall Mater Trans B,1996,27(4):672
|
被引
8
次
|
|
|
|
17.
Garcia-Hernandez S.
Ironmak Steelmak,2010,37(5):360
|
被引
7
次
|
|
|
|
18.
Wang Y F.
Steel Res Int,2011,82(4):428
|
被引
6
次
|
|
|
|
19.
Bai H.
Metall Mater Trans B,2001,32(2):253
|
被引
18
次
|
|
|
|
20.
Yuan F M.
J Univ Sci Technol Beijing,2006,13(1):21
|
被引
3
次
|
|
|
|
|