多几何特征约束的单幅图像相机自标定方法
Camera Self-calibration Using Multiple Geometric Constraints in a Single Image
查看参考文献18篇
|
文摘
|
目前,图像获取设备及方式呈现多样化趋势,获取的图像数量、重叠度等不完全具备传统摄影测量方法应用的需求。若要获取图像中包含的丰富场景几何信息,就需要发展依赖图像刻画内容的相机自标定方法,建立起图像与现实场景之间的桥梁。故此,本文提出了利用单幅图像中几何约束条件的相机自标定方法,并顾及多个几何特征约束,根据方差合理地为其设定不同的权重,以提高相机的标定精度。本文总结了现有现实场景中几何特征及可由其求解而得的相应不变量,以及几何特征对相机内参的约束关系。在对图像刻画场景中多个平面及几何特征进行编码的基础上,利用不同组合的几何约束条件求解相机内参,根据多次提取每一种几何特征组合求解内参的方差确定本次计算内参所占权重,综合每一组几何特征所确定的内参及其权重综合计算最终的相机内参值,从而实现多几何约束相机自标定方法。通过室内外场景验证测试,结果证明,本方法具有可用性、便捷性和较好的鲁棒性。 |
|
其他语种文摘
|
Camera self-calibration is a key step to acquisition 3D space information from 2D image, and it is always one of the important issues in photogrammetry. However, present methods for camera self-calibration need two or more images and/or their corresponding points. With the development of digital devices for image taken and (wireless) network, a method not depending on digital device, images taken process, or multiple images, is badly needed. Consequently this paper presented a novel method that makes full use of various geometric constraints to realize reliable camera calibration for a single image. Firstly, this paper summarized various geometric constraints and invariants for the existing camera self-calibration method. Secondly, in order to build the relationships among geometric constraints for calibration, we coded for different planes and geometric features in an image. Because variance represents the error distribution, it can be considered as the determinant. In this paper, we obtained the variance of different combination of geometric features for camera calibration by means of fitting each groups of geometric features for thirty times, and then depended on the variance above to determine the weight of each camera's internal parameters. Finally, based on each camera's internal parameters, here we only focus on foci length, and their corresponding weights, the ultimate results are computed. Two images which depict inside and outside scene respectively were chosen to test the usability of our methods. In order to avoid the influence of image distortion, we corrected it using amethod we proposed in another paper before tests. The test results show that: 1) the weighted method gave a more stable result, relative to the result of each group geometric constraints, that is one group's relative error is two high and in other may be lower; 2) the weighted method obtained a higher accuracy result than the mean of all groups. The results of verification testing for the two images of the indicated that our weighted method can comprehensive employs variety of geometric constraints in single image, in the other side, it also takes their corresponding variance into account. It makes full use of the variety, usability and stability of geometric constraints. It can be employed to images depict indoor and outdoor which contains more geometric constraints. |
|
来源
|
地球信息科学学报
,2012,14(5):644-651 【核心库】
|
|
关键词
|
自标定
;
单幅图像
;
多几何特征约束
;
不变量
;
几何特征
|
|
地址
|
南京师范大学, 虚拟地理环境教育部重点实验室, 南京, 210046
|
|
语种
|
中文 |
|
ISSN
|
1560-8999 |
|
学科
|
自动化技术、计算机技术 |
|
基金
|
国家科技支撑计划项目
;
江苏省高校自然科学基础研究重大项目
;
江苏省测绘科研基金
|
|
文献收藏号
|
CSCD:4661428
|
参考文献 共
18
共1页
|
|
1.
孟晓桥. 摄像机自标定方法的研究与进展.
自动化学报,2003,29(1):110-124
|
被引
66
次
|
|
|
|
|
2.
Zhao Z. Camera calibration with three non-collinearpoints under special motions.
IEEE Trans. Image Process,2008,17(12):2393-2402
|
被引
4
次
|
|
|
|
|
3.
Hong W. On symmetry and multiple-view geometry: Structure, pose, and calibration from a single image.
International Journal of Computer Vision,2004,60(3):241-265
|
被引
4
次
|
|
|
|
|
4.
Wu Y H. Coplanar circles, quasi-affine invariance and calibration.
Image and Vision Computing,2006,24:319-326
|
被引
12
次
|
|
|
|
|
5.
Wang G. Camera calibration and 3Dreconstruction from a single view based on scene constraints.
Image and Vision Computing,2005,23(3):311-323
|
被引
4
次
|
|
|
|
|
6.
吴福朝. 由矩形确定摄像机内参数与位置的线性方法.
软件学报,2003,14(3):703-712
|
被引
34
次
|
|
|
|
|
7.
段福庆. 基于平行性约束的摄像机标定与3D重构.
软件学报,2007,18(6):1350-1360
|
被引
10
次
|
|
|
|
|
8.
邱卫国. 基于单张平行六面体照片的摄像机标定方法.
传感器技术,2005,24(6):8588
|
被引
1
次
|
|
|
|
|
9.
魏峰. 采用单幅圆柱体图像的摄像机标定.
工程图学学报,2009(1):109-113
|
被引
3
次
|
|
|
|
|
10.
Miyagawa I. Simple camera calibration from a single image using five points on two orthogonal 1D Objects.
IEEE Transactions on Image Processing,2010,19(6):1528-1538
|
被引
13
次
|
|
|
|
|
11.
Chen Y S. Full camera calibration from a single view of planar scene.
ISVC 2008, Part I, LNCS 5358,2008:815-824
|
被引
3
次
|
|
|
|
|
12.
Kim J S. Geometric and algebraic constraints of projected concentric circles and their applications to camera calibration.
IEEE PAMI,2005,27(4):637-642
|
被引
22
次
|
|
|
|
|
13.
Zhong H. Camera calibration using circle and right angles.
Proc. of ICPR'06,2006:646-649
|
被引
1
次
|
|
|
|
|
14.
谢文寒. 一种新的基于灭点的相机标定方法.
哈尔滨工业大学学报,2003,35(11):13841387,1391
|
被引
1
次
|
|
|
|
|
15.
Caprile B. Using vanishing points for camera calibration.
International Journal of Computer Vision,1990,4(2):127-140
|
被引
66
次
|
|
|
|
|
16.
Meng X Q. A new easy camera calibration technique based on circular points.
Pattern Recognition,2003,36:1155-1164
|
被引
19
次
|
|
|
|
|
17.
Hartley R.
Multiple view geometry in computer vision,2000
|
被引
161
次
|
|
|
|
|
18.
卢玥. 基于数位的相机径向畸变参数计算.
地理与地理信息科学,2011,27(6):1822
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问