帮助 关于我们

返回检索结果

大内收缩比二元高超声速进气道波系配置特性
Shocks Arrangement of Ramp Compression Hypersonic Inlet with High Internal Contraction Ratio

查看参考文献17篇

文摘 为了发展适应宽飞行范围的高超声速二元进气道设计技术,考察了内收缩比对进气道特性的影响规律,并提出了结合附面层抽吸辅助自起动的大内收缩比进气道波系设计方法,改善了二元进气道低马赫条件下流量捕获低的弱点。研究发现,存在着设计点推力最优进气道内收缩比,而进气道非设计点流量系数随内收缩比而增大。基于最优内收缩比进气道构型,取消外压激波封口约束,通过局部等熵压缩波分散打进内收缩段内部,大幅提高了进气道低马赫流量捕获。并进一步通过合理配置内收缩段抽吸槽,以设计点(马赫6)1%,非设计点(马赫4)3%的流量损失使进气道自起动马赫数降到3.35,改善了内收缩比过大导致的自起动问题。
其他语种文摘 The paper presents the shocks arrangement of ramp compression hypersonic inlet with fixed geometry within a range of flight Mach number.The effect of internal contraction ratio was studied based on the inlet optimization design with the objective of scramjet thrust.The design methods for the inlet shocks and bleeding slots were then developed.The result reveals that an optimal inlet internal contraction ratio exists for on-design engine thrust,while the pressure ratio and mass flow capture on off-design condition increase with the internal contraction ratio.An oblique shock can be replaced by isentropic compression waves impinging into the internal duct without focus,which cancels the restriction of shock-on-lip.This modification would dramatically improve the inlet mass capture on off-design point.Moreover,the rational bleeding is proven to be viable for inlet starting,which reduced the inlet self-starting Mach number to 3.35 with a little mass loss.
来源 推进技术 ,2012,33(4):505-509 【核心库】
关键词 超燃冲压发动机 ; 二元高超声速进气道 ; 波系配置 ; 附面层抽吸
地址

中国科学院力学研究所, 中国科学院高温气体动力学重点实验室, 北京, 100190

语种 中文
ISSN 1001-4055
学科 航空
基金 武器装备预研项目 ;  国家自然科学基金
文献收藏号 CSCD:4620495

参考文献 共 17 共1页

1.  Richard Mutzman. X-51 Development: A Chief Engineer’s Perspective. 17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference,2011 被引 2    
2.  Hank Joseph M. The X-51A Scramjet Engine Flight Demonstration Program. AIAA 2008-2540 被引 5    
3.  Ferlemann Shelly M. Hyper-X Mach 7 Scramjet Design,Ground Test and Flight Results. AIAA 2005-3322 被引 2    
4.  Christopher D Karlgaard. Hyper-X Mach 10 Trajectory Reconstruction. AIAA 2005-5920 被引 1    
5.  金志光. 典型二元高超声速进气道与侧压式进气道性能比较. 航空动力学报,2008,23(9) 被引 2    
6.  Michael Blaize. Automated Optimal Design of Two-Dimensional High Speed Missile Inlets. AIAA 98-0950 被引 1    
7.  Susumu Hasegawa. Application of Optimization Algorithms to Scramjet Inlet Design. AIAA 2005-3207 被引 1    
8.  Xu Xu. Optimization Design for Scramjet and Analysis of Its Operation Performance. Acta Astronautica,2005,57:390-403 被引 6    
9.  Matthew Brown. Robust Design Optimization of Two-Dimensional Scramjet-Inlets. AIAA 2006-8140 被引 1    
10.  Vijay Shukla. Automated Redisign of the NASA P8 Hypersonic Inlet Using Numerical Optimization. AIAA 96-2549 被引 1    
11.  Sabean Johnw. Computational Optimization of a Hypersonic Rectangular-to-Circular Inlet. Journal of Propulsion and Power,2001,17(3):571-578 被引 8    
12.  罗世彬. 超燃冲压发动机二维进气道多级多目标优化设计方法. 国防科技大学学报,2004,26(3):1-6 被引 15    
13.  张晓嘉. 二元高超声速进气道设计方法和优化,2008 被引 1    
14.  岳连捷. 二元高超声速进气道优化设计方法研究. CSTAM2008-0028 被引 1    
15.  岳连捷. 定几何二元高超声速进气道波系配置特性. CSTAM2010-0060 被引 1    
16.  Van Wie D M. Starting Characteristics of Supersonic Inlets. AIAA 96-2914 被引 18    
17.  Zhufei Li. A Novel Test of Starting Characteristics of Hypersonic Inlets in Shock Tunnel. AIAA 2011-230 被引 1    
引证文献 4

1 潘瑾 非均匀来流下等压力梯度曲面压缩系统的试验研究 推进技术,2013,34(12):1593-1600
被引 3

2 王振锋 脉冲燃烧风洞点式油流技术在压缩拐角流动显示中的应用 推进技术,2014,35(11):1455-1460
被引 3

显示所有4篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号