Oscillation Characteristics of Molten Metal Free Surface Under Compound Magnetic Field
查看参考文献12篇
|
文摘
|
The free surface waves of a molten low-melting point Sn-32%Pb-52%Bi alloy under the imposition of an AC and a static magnetic field were visualized and recorded by use of a laser displacement sensor and a high speed video camera. The Fourier analysis method was used to analyze the oscillation characteristics. The results show that at the center of the free surface,the azimuthal and radial oscillation mode can be found simultaneously owing to AC magnetic field. With increasing coil current intensity,the amplitude and the main frequencies of the oscillations increase,and the azimuthal fluctuation at the center of the free surface is also enhanced. The fluctuation characteristics are closely related to the turbulent flow induced by the alternating electromagnetic force. A series of regular traveling waves can be observed on free surface,and the main frequencies of oscillations at three-phase points decrease owing to superposing AC and static magnetic field. The static magnetic field can remarkably control the unstable swinging behavior of free surface. With increasing static magnetic flux density,the amplitude of oscillations at the center of free surface decreases firstly,and then increases,but the fluctuation amplitude at the triple-phase point always reduces and keeps within 1 mm,and the azimuthal waves at the center of free surface are weakened. Especially at 1.44 T,the radial waves are dominant. The static magnetic flux density should be controlled in an appropriate range to obtain more stable free surface. With compound magnetic field,even if the static magnetic flux density is above 1.0 T,the free surface still vibrates with lower amplitude and dominant frequency. |
|
来源
|
Journal of Iron and Steel Research
, International,2011,18(5):25-30,37 【核心库】
|
|
DOI
|
10.1016/s1006-706x(11)60060-5
|
|
关键词
|
continuous casting
;
compound magnetic field
;
free surface
;
fluctuation
|
|
地址
|
Northeastern University, Key Laboratory of National Education Ministry for Electromagnetic Processing of Materials, Liaoning, Shenyang, 110004
|
|
语种
|
英文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1006-706X |
|
学科
|
冶金工业 |
|
基金
|
国家自然科学基金
;
国家863计划
;
国家教育部高等学校学科创新引智计划项目
|
|
文献收藏号
|
CSCD:4468566
|
参考文献 共
12
共1页
|
|
1.
Vives C. Electromagnetic Refining of Aluminum Alloys by the CREM Process: Part I. Working Principle and Metallurgical Results.
Metall Trans, B,1989,20(5):623
|
被引
97
次
|
|
|
|
|
2.
Zhu X R. Calculation of the Free Surface Shape in the Electromagnetic Processing of Liquid Metals.
Appl Math Modeling,1997,21(4):207
|
被引
8
次
|
|
|
|
|
3.
Zeng Dehong. Numerical Simulation of Meniscus Shape in Cold Crucible Continuous Casting.
Acta Metallurgica Sinica, (in Chinese),2000,36(2):162
|
被引
1
次
|
|
|
|
|
4.
Deng Anyuan. Meniscus Behavior in Electromagnetic Soft-Contact Continuous Casting Round Billet Mold.
Journal of Iron and Steel Research, International,2006,13(4):13
|
被引
16
次
|
|
|
|
|
5.
Chino Y. Excitation of Waves on a Molten Metal by an Intermittent Alternating Magnetic Field.
Tetsu-to-Hagane, (in Japanese),1996,82(12):1047
|
被引
2
次
|
|
|
|
|
6.
Burty M. Contribution to Fundamental Study of Metal-Slag Mass Transfer in Ladle Metallurgy.
The 3rd International Conference on Electromagnetic Processing of Materials,2000:321
|
被引
1
次
|
|
|
|
|
7.
Fautrelle Y. Free Surface Controlled by Magnetic Fields.
ISIJ International,2003,43(6):801
|
被引
6
次
|
|
|
|
|
8.
Karcher Ch. Control of Free-Surface Instabilities During Electromagnetic Shaping of Liquid Metals.
International Scientific Colloquium Modeling for Electromagnetic Processing,2008:143
|
被引
2
次
|
|
|
|
|
9.
Zhang Bin. Research of Surface Stability of Molten Metal Under Alternative Magnetic Field.
Foundry Technology, (in Chinese),2002,23(6):388
|
被引
1
次
|
|
|
|
|
10.
Negrini F. Electromagnetic Control of the Meniscus Shape During Casting in a High Frequency Magnetic Field.
Energy Conversion and Management,2000,41(15):1687
|
被引
8
次
|
|
|
|
|
11.
Xu Xiujie. Evolvement Mechanism of Surface Oscillation Marks on Round Billet During Soft-Contact Electromagnetic Continuous Casting.
Acta Metallurgica Sinica, (in Chinese),2009,45(4):464
|
被引
1
次
|
|
|
|
|
12.
Deng A Y. Experimental Study on Meniscus Behavior Affected by Alternating and Static Magnetic Field.
6th International Conference on Electromagnetic Processing of Materials,2009:235
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问