无杆气缸驱动的柔性机械臂振动控制
Vibration Control of a Flexible Manipulator Driven by a Pneumatic Rodless Cylinder
查看参考文献11篇
|
文摘
|
提出了一种无杆气缸驱动的柔性机械臂定位和振动抑制系统，采用脉冲码调制(pulse code modulation，PCM)方法实现。首先，推导了气动驱动柔性臂的系统模型，对采用的复合定位和振动抑制控制算法进行理论分析。其次，气缸行程长、气体具有压缩性以及气动驱动存在非线性和阀门开关有时延等因素会引起控制作用的滞后问题，容易激发高阶模态的极限环振荡，导致观测和控制溢出，这将影响控制系统的稳定性。为了克服上述问题，在控制算法中引入时延补偿、低通滤波法。最后，进行气动驱动柔性臂同时定位和振动抑制的试验研究。试验结果表明，采用的气动驱动控制方法可以有效地抑制柔性臂的低频模态振动，并同时实现定位。 |
|
其他语种文摘
|
A pneumatic rodless cylinder driven flexible manipulator control system is proposed for positioning and vibration suppression of the manipulator,using pulse code modulation(PCM) method.Firstly,the system model of the pneumatic flexible manipulator is derived.Theoretical analysis of the composite positioning and vibration suppression control algorithm is performed.Secondly,because the hysteretic problem of control effect is caused by the following factors,such as long stroke of the cylinder.compressibility of air,nonlinearity of pneumatic driving and time delay of valves’ switch,thus, the limit cycle oscillation of high-frequency modes vibration can be easily excited,and the observation and control spillover will be caused.Also,the stability of the control system will be affected.In order to solve this problem,compensation of time delay and low-pass filter methods are introduced into the control algorithm.Finally,experiments on positioning and vibration suppression of the pneumatic flexible manipulator are conducted.The experimental results demonstrate that the composite control method can suppress the low-frequency mode vibration of the flexible manipulator effectively and achieve the purpose of positioning simultaneously. |
|
来源
|
机器人
,2012,34(1):9-16 【核心库】
|
|
DOI
|
10.3724/spj.1218.2012.00009
|
|
关键词
|
柔性机械臂
;
主动振动控制
;
气动驱动
;
脉冲码调制
|
|
地址
|
1.
华南理工大学机械与汽车工程学院, 广东, 广州, 510641
2.
中国科学院沈阳自动化研究所, 机器人学国家重点实验室, 辽宁, 沈阳, 110016
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1002-0446 |
|
学科
|
自动化技术、计算机技术 |
|
基金
|
国家自然科学基金资助项目
;
华南理工大学基本科研业务费项目
;
机器大学国家重点实验室基金资助项目
|
|
文献收藏号
|
CSCD:4441439
|
参考文献 共
11
共1页
|
|
1.
Dwivedy S K. Dynamic analysis of flexible manipulators, a literature review.
Mechanism and Machine Theory,2006,41(7):749-777
|
被引
78
次
|
|
|
|
|
2.
Ge S S. A robust distributed controller of a single-link SCARA/Cartesian smart materials robot.
Mecha-tronics,1999,9(1):65-93
|
被引
4
次
|
|
|
|
|
3.
Dadfarnia M. An observer-based piezoelectric control of flexible Cartesian robot arms: Theory and experiment.
Control Engineering Practice,2004,12(8):1041-1053
|
被引
6
次
|
|
|
|
|
4.
邱志成. 基于复合喷气压电驱动器的柔性机械臂振动控制.
机械工程学报,2009,45(5):184-192
|
被引
9
次
|
|
|
|
|
5.
Kaitwanidvilai S. Robust loop shaping-fuzzy gain scheduling control of a servo-pneumatic system using particle swarm optimization approach.
Mechatronics,2011,21(1):11-21
|
被引
7
次
|
|
|
|
|
6.
Taghizadeh M. Improving dynamic performances of PWM-driven servo-pneumatic systems via a novel pneumatic circuit.
ISA Transactions,2009,48(4):512-518
|
被引
7
次
|
|
|
|
|
7.
王宣银. PCM气动伺服系统的建模研究.
机床与液压,1997,25(4):20-22
|
被引
4
次
|
|
|
|
|
8.
宁舒. 气动位移系统的计算机“PCM”控制初探.
液压与气动,1991(1):18-22
|
被引
7
次
|
|
|
|
|
9.
Barth E J. A control design method for switching systems with application to pneumatic servo systems.
ASME International Mechanical Engineering Congress & Ex-position,2002:17-22
|
被引
1
次
|
|
|
|
|
10.
曲以义.
气压伺服系统,1986
|
被引
9
次
|
|
|
|
|
11.
Clark R L.
Adaptive structures dynamics and control,1998
|
被引
3
次
|
|
|
|
|
了解气象卫星更多信息，请访问