航行体垂直出水载荷与空泡溃灭机理分析
MECHANISM ANALYSIS ABOUT CAVITATION COLLAPSE LOAD OF UNDERWATER VEHICLES IN A VERTICAL LAUNCHING PROCESS
查看参考文献15篇
文摘
|
针对航行体水下垂直发射出水载荷机理问题,首先开展了典型工况全过程的数值模拟,得到了航行体肩、尾空泡及表面压力的演化过程,并与试验结果进行了对比验证.在此基础上揭示了航行体肩部空泡溃灭的过程和机制,进而提出了出水溃灭压力的物理模型,探索了空泡厚度、水层厚度、声速等重要参数的影响,讨论了试验溃灭压力相似律等相关问题. |
其他语种文摘
|
Pressure pulses generated by cavitation collapse when vehicles launching through the free surface will be the key loads on the underwater vehicle structures.Consequently,it is very significant to investigate the mechanism of cavitation evolution and collapse.Firstly,a typical vertical launching process was simulated, and time sequences of pressure distribution were gained and verified by experimental results.Through the analysis about flow fields,mechanism for the occurrence and evolution of cavitation collapse wereinvestigated. Furthermore,a physical model of collapse pressure was established,by which influence of important factors such as cavity thickness,thickness of water layer and sound speed were studied.Finally,relative issues about the similarity law of scaled tests and load-reduction measurements were discussed. |
来源
|
力学学报
,2012,44(1):39-48 【核心库】
|
关键词
|
水下发射
;
空化
;
数值模拟
;
溃灭载荷
|
地址
|
1.
中国科学院力学研究所, 中国科学院水动力学与海洋工程重点实验室, 北京, 100190
2.
中国科学院力学研究所, 非线性力学国家重点实验室, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0459-1879 |
学科
|
力学 |
文献收藏号
|
CSCD:4438116
|
参考文献 共
15
共1页
|
1.
Besant W.
A Treatise on Hydrodynamics. Part II: Hydromechanics. G Bell and Sons,1913:30-39
|
被引
1
次
|
|
|
|
2.
Blake J. Cavitation bubbles near boundaries.
Annual Review of Fluid Mechanics,1987,19(1):99-123
|
被引
62
次
|
|
|
|
3.
Saito Y. Cavitation bubble collapse and impact in the wake of a circular cylinder.
Proceeding of the Fifth International Symposium on Cavitation (CAV2003),2003:1-6
|
被引
1
次
|
|
|
|
4.
黄彪. 绕平头回转体非定常空化流体动力特性研究.
实验流体力学,2011,25(2):22-28
|
被引
11
次
|
|
|
|
5.
权晓波. 航行体出水过程空泡溃灭特性研究.
船舶力学,2008,12(4):545-549
|
被引
20
次
|
|
|
|
6.
胡影影. 半无限长柱体出水数值模拟.
清华大学学报(自然科学版),2002,42(2):235-238
|
被引
10
次
|
|
|
|
7.
傅慧萍. 回转体空泡流特性研究.
水动力学研究与进展,2005,20(1):84-98
|
被引
18
次
|
|
|
|
8.
闵景新. 潜射导弹垂直发射过程流体动力特性数值模拟.
兵工学报,2010,30(10):1303-1309
|
被引
16
次
|
|
|
|
9.
Toumi I. Approximate Riemann solvers and flux vector splitting schemes for two-phase flow.
Proceedings of the 30th Computational Fluid Dynamics, von Karman Inst. Lecture Ser,1999:3
|
被引
1
次
|
|
|
|
10.
Coutier-Delgosha O. Analysis of cavitating flow structure by experimental and numerical investigations.
J Fluid Mech,2007,578:171-222
|
被引
13
次
|
|
|
|
11.
Merkle C L. Computational modeling of the dynamics of sheet cavitation.
Proc 3rd International Symposium on Cavitation,1998
|
被引
1
次
|
|
|
|
12.
Kunz R F. A preconditioned navier-stokes method for two-phase flows with application to cavitation.
Comput Fluids,1998,29(8):849-875
|
被引
3
次
|
|
|
|
13.
Singhal A K. Mathematical basis and validation of the full cavitation model.
Journal of Fluids Engineering,2002,124(3):617-624
|
被引
353
次
|
|
|
|
14.
Wilcox D C.
Turbulence Modeling for CFD (2nd edition),1998
|
被引
2
次
|
|
|
|
15.
杜特专. 动网格技术在非稳态空化流计算中的应用.
水动力学研究与进展,A辑,2010,25(2):191-198
|
被引
4
次
|
|
|
|
|