帮助 关于我们

返回检索结果

热处理对定向凝固Co基合金微观组织的影响
Effect of Heat-treatment on Microstructure of Directional Solidification Co-base Superalloy

查看参考文献7篇

孙跃军 1   林陌思 1   葛艳辉 2   张军 3  
文摘 利用XRD和扫描电镜研究了热处理对一种定向凝固Co基合金微观组织的影响。结果表明:Co基合金的铸态组织主要由Co的固溶体基体、M_7C_3、MC和M_(23)C_6碳化物组成,其中M_7C_3和MC为块状,主要分布在枝晶间,M_(23)C_6呈颗粒状,分布在块状M_7C_3和MC周围。合金经1150℃×4h固溶处理后,大部分块状M_7C_3和MC溶入Co的固溶体基体中,在随后的空冷中析出颗粒状M_(23)C_6。在870℃和970℃时效时,随时效温度的升高和时效时间的延长,合金中M23C6的尺寸逐渐增大。
其他语种文摘 The effects of heat-treatment on the microstructure of directional solidification Co-base superalloy were investigated using XRD and SEM.The results show that the microstructure of Co-base superalloy as-cast is composed of Co matrix,M_7C_3,MC and M_(23)C_6.Among them,MC and M_7C_3 distributes in inter dentrite and M_(23)C_6 near the MC and M_7C_3.After solid solution heat-treating at 1150 ℃ for 4 h,most MC and M_7C_3 dissolves into Co-base matrix,M_(23)C_6 is deposited from Co matrix during following air cooling.When aging at 870 ℃and 970 ℃,the size of M_(23)C_6 increases with the increase of temperature and aging time.
来源 热加工工艺 ,2011,40(12):152-154,159 【核心库】
关键词 定向凝固Co基合金 ; 固溶 ; 时效 ; 碳化物
地址

1. 辽宁工程技术大学材料科学与工程学院, 辽宁, 阜新, 123000  

2. 中平能化集团天工机械制造有限公司, 河南, 平顶山, 467000  

3. 中国科学院力学研究所, 北京, 100190

语种 中文
文献类型 研究性论文
ISSN 1001-3814
学科 金属学与金属工艺
文献收藏号 CSCD:4425540

参考文献 共 7 共1页

1.  Ssims C T. A contemporary view of cobalt-base alloys. J. Met.,1967,21(1):27-42 被引 1    
2.  Davin A. Modified X40 alloy with improved creep-rupture strength. Cobalt,1974(2):32-33 被引 1    
3.  Fukui Y. Effect of titanium, niobium and zirconium on creep rupture strength and ductility of superalloy. Metall. Trans. A,1981,12:1033-1039 被引 1    
4.  Vandermousen R F. Directional solidification of cobalt-base superalloys. Cobalt,1974(1):6-12 被引 1    
5.  姜文辉. DZ40M钴基高温合金950℃长期时效后的组织与性能. 金属学报,1998,34(12):1289-1294 被引 9    
6.  Hiroshi. Effect of heat treatment on precipitation behaviour and high temperature strength in a wrought Co-base superalloy. Journal of Materials Science,1986,21:2803-2811 被引 1    
7.  Jiang Wenhui. Secondary carbide precipitation in a directionally solidified cobalt base superalloy. Metall. Trans. A,1999,30:513-520 被引 6    
引证文献 2

1 崔宸 热处理对42CrMo钢表面激光熔覆钴基涂层性能的影响 中国激光,2020,47(6):0602011
被引 0 次

2 高枫 WC含量及热处理对WC-Fe60熔覆层组织与性能的影响 金属热处理,2023,48(10):260-265
被引 0 次

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号