帮助 关于我们

返回检索结果

同轴送粉激光熔覆中粉末流对光束能量的衰减作用
Laser Power Attenuation by Powder Flow in Coaxial Laser Cladding

查看参考文献13篇

文摘 为了得到同轴送粉激光熔覆中激光束穿过粉末流后的能量变化,研究了粉末浓度分布对激光能量的衰减作用。模拟了稳态、存在基底和熔池的情况下粉末流的空间分布,通过粉末浓度与激光能量衰减的关系,得到了任意粉末分布及激光能量分布下的衰减率。研究了基底对气流场的作用以及基底对粉末的反弹作用两种因素对粉末浓度分布的影响,并比较了平顶形光束在不同熔池尺寸和送粉率下的衰减率。结果表明,存在基底时粉末流对激光的衰减率比无基底作用时一般高2倍以上,与送粉率成正比,在熔池尺寸较小时与其大小成反比。
其他语种文摘 The laser power attenuation by powder flow in coaxial laser cladding is investigated numerically and experimentally.A steady model of powder concentration distribution is developed,considering the effect of substrate on gas-flow and rebound of powder particles.The relationship between powder concentration and attenuation of laser power is analyzed.The effects of melt pool size and powder flow rate on a top hat laser beam attenuation are investigated.Results indicate that power attenuation by powder flow with the effect of substrate can be twice more than that without substrate.The attenuation is proportional to the powder flow rate and decreases with the increase of melt pool size when the pool size is small.
来源 中国激光 ,2011,38(9):0903005-1-0903005-6 【核心库】
关键词 激光技术 ; 激光熔覆 ; 粉末浓度 ; 能量衰减
地址

中国科学院力学研究所, 中国科学院先进制造工艺力学重点实验室, 北京, 100190

语种 中文
文献类型 研究性论文
ISSN 0258-7025
学科 金属学与金属工艺;电子技术、通信技术
基金 国家自然科学基金重点项目 ;  国家自然科学基金面上项目
文献收藏号 CSCD:4325157

参考文献 共 13 共1页

1.  李晓薇. 激光熔覆技术的研究进展. 激光杂志,2007,28(2):1-2 被引 17    
2.  R. R. Unocic. Process efficiency measurements in the laser engineered net shaping process. Metal.Mater.Trans.B-Process Metal.Mater.Process.Sci,2004,35(1):143-152 被引 4    
3.  李会山. 激光再制造的光与粉末流相互作用机理及试验研究,2004 被引 2    
4.  Changyi Liu. Thermal processes of a powder particle in coaxial laser cladding. Opt.Laser Technol,2003,35(2):81-86 被引 5    
5.  席明哲. 同轴送粉激光成形中粉末与激光的相互作用. 中国激光,2005,32(4):562-566 被引 21    
6.  S. Y. Wen. Modeling of coaxial powder flow for the laser direct deposition process. International Journal of Heat and Mass Transfer,2009,52(25/26):5867-5877 被引 14    
7.  路桥潘. 载气式同轴送粉喷嘴的数值模拟及实验研究. 中国激光,2010,37(12):3162-3167 被引 11    
8.  Jichang Liu. Attenuation of laser power of a focused Gaussian beam during interaction between a laser and powder in coaxial laser cladding. J.Phys.D:Appl.Phys,2005,38(10):1546-1550 被引 3    
9.  Andrew J. Pinkerton. An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition. J.Phys.D:Appl.Phys,2007,40(23):7323-7334 被引 7    
10.  董哲. 激光熔覆中球形粒子对激光散射强度的研究. 光学学报,2009,29(5):1296-1300 被引 10    
11.  Bruce R. Munson. Fundamentals of Fluid Mechanics,2009 被引 2    
12.  S. A. Morsi. An investigation of particle trajectories in two-phase flow systems. J.Fluid Mech,1972,55(2):193-208 被引 212    
13.  I. Tabernero. Numerical simulation and experimental validation of powder flux distribution in coaxial laser cladding. J.Mater.Process.Technol,2010,210(15):2125-2134 被引 13    
引证文献 5

1 孙道金 激光熔覆纯镍熔池底部组织生长的相场法模拟 中国激光,2013,40(4):0403005-1-0403005-6
被引 4

2 申卫国 同轴送粉激光熔覆中激光透过率研究 机械工程学报,2014,50(8):59-65
被引 1

显示所有5篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号