等离子体电解氧化弧光放电的瞬态测定及温度场模拟
Instantaneous measurement and temperature field simulation of arc discharge in plasma electrolytic oxidation process
查看参考文献20篇
文摘
|
为描述等离子体电解氧化(PEO)过程中单个弧光放电通道内部及周围温度场分布,构建圆柱形放电通道模型。采用高速摄像机和概率统计方法,测定铝合金PEO膜层生长典型阶段弧光放电的弧斑密度及通道尺寸等特征参数;通过计算单个弧光的延迟寿命(140μs)以及能量,获得模型参数。采用Ansys软件模拟单个弧光放电通道内部及周围温度场分布,计算得出弧光通道中心温度超过2×104 K,从传热学角度解释了PEO陶瓷层中γ-Al2O3和α-Al2O3的生成过程以及陶瓷层微结构的形成原因。 |
其他语种文摘
|
In order to describe the temperature field distribution around a single discharge channel exactly during plasma electrolytic oxidation(PEO)process,a cylinder-shaped discharge model was designed.In the typical stage of the PEO coating growth on aluminium alloy,by using the high-speed camera and statistical method,the characteristic parameters of discharges,such as the spatial density of arc spot and size of channel,were measured,the lifetime(140 μs)and energy of a single spark were also calculated.The parameters of the model were obtained.The Ansys software was adopted to simulate the temperature field around a single discharge channel.The center temperature of the discharge channel was over 2×104 K.The results can explain the formation of γ-Al2O3 and α-Al2O3 and microstructure in the ceramic coatings from the heat transfer theory. |
来源
|
中国有色金属学报
,2011,21(7):1681-1687 【核心库】
|
关键词
|
等离子体电解氧化
;
单弧光
;
瞬态放电
;
温度场模拟
|
地址
|
中国科学院力学研究所, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1004-0609 |
学科
|
金属学与金属工艺 |
基金
|
国家自然科学基金面上项目
;
国家自然科学基金重点项目
;
中国博士后科学基金
|
文献收藏号
|
CSCD:4256622
|
参考文献 共
20
共1页
|
1.
Xue W B. Characterization of ceramic coatings fabricated on zirconium alloy by plasma electrolytic oxidation in silicate electrolyte.
Materials Chemistry and Physics,2010,120:656-660
|
被引
9
次
|
|
|
|
2.
MATYKINA E. Investigation of the growth processes of coatings formed by AC plasma electrolytic oxidation of aluminium.
Electrochimica Acta,2009,54:6767-6778
|
被引
15
次
|
|
|
|
3.
YEROKHIN A L. Plasma electrolysis for surface engineering.
Surface and Coatings Technology,1999,122:73-93
|
被引
396
次
|
|
|
|
4.
姜兆华. 铝合金在水玻璃-KOH-NaAlO_2体系中的微等离子体氧化.
中国有色金属学报,2000,10(4):519-524
|
被引
20
次
|
|
|
|
5.
吴振东. 纯铝及其合金的微等离子体氧化成膜特征.
中国有色金属学报,2005,15(6):946-951
|
被引
9
次
|
|
|
|
6.
Duan H P. Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D.
Electrochimica Acta,2006,51:2898-2908
|
被引
58
次
|
|
|
|
7.
HUSSEIN R O. Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation(PEO)process.
J Phys D:Appl Phys,2010,43:1-13
|
被引
4
次
|
|
|
|
8.
Wu Z Q. Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel.
Applied Surface Science,2007,253:8398-8403
|
被引
6
次
|
|
|
|
9.
Guan Y J. Interface fracture property of PEO ceramic coatings on aluminum alloy.
Surface and Coatings Technology,2008,202(17):4204-4209
|
被引
1
次
|
|
|
|
10.
YEROKHIN A L. Discharge characterization in plasma electrolytic oxidation of aluminium.
Appl Phys,2003,36:2110-2120
|
被引
50
次
|
|
|
|
11.
李华平. 微弧熔区的淬冷过程及其对氧化铝膜微观结构的影响.
无机材料学报,2008,23(1):114-120
|
被引
4
次
|
|
|
|
12.
KLAPKIV M D. Simulation of synthesis of oxide-ceramic coatings in discharge channels of a metal-electrolyte system.
Materials Science,1999,33:279-283
|
被引
1
次
|
|
|
|
13.
王立世. 等离子体电解氧化过程中单个稳态微放电的热效应研究.
物理学报,2007,56(9):5341-5344
|
被引
6
次
|
|
|
|
14.
Xue W B. Features of film growth during plasma anodizing of Al 2024/SiC metal matrix composite.
Applied Surface Science,2006,252:6195-6200
|
被引
9
次
|
|
|
|
15.
CURRAN J A. Porosity in plasma electrolytic oxide coatings.
Acta Materialia,2006,54:1985-1993
|
被引
24
次
|
|
|
|
16.
李荫亭(译).
传热学手册(上册),1985:125-128
|
被引
1
次
|
|
|
|
17.
薛文斌. 铝微弧氧化电流效率的测定.
电镀与精饰,1998,20(3):1-5
|
被引
3
次
|
|
|
|
18.
BAOVAN T. Mechanism of anodic spark deposition.
Ceramic Bulletin,1977,56(6):563-566
|
被引
1
次
|
|
|
|
19.
贺永胜. 铝合金微弧氧化热力学机理及影响因素的分析.
电镀与环保,2005,25(6):38-40
|
被引
4
次
|
|
|
|
20.
薛文彬. 铝合金微弧氧化陶瓷膜的相分布及其形成.
无机材料学报,1997,11(2):169-176
|
被引
1
次
|
|
|
|
|