密胺树脂硫磺微胶囊的制备及应用
Preparation and application of poly(melamine-formaldehyde)microcapsules filled with sulfur
查看参考文献15篇
文摘
|
针对橡胶硫化中的“喷霜”和橡胶裂纹的自修复问题,以升华硫为芯材,密胺树脂(PMF)为壳材,采用原位聚合法制备了密胺树脂硫磺微胶囊。研究了密胺树脂的缩聚pH值对微胶囊形态的影响,乳化剂浓度、芯材含量对微胶囊粒径的影响以及密胺树脂的缩聚pH值、液固相比(W/S)、甲醛和密胺的摩尔比对微胶囊包覆率的影响。结果表明:密胺树脂的缩聚pH值为4时制备的硫磺微胶囊形态较好;甲醛与密胺的摩尔比为2:1,水相和硫磺的质量比为8:1时包覆率较高;十二烷基磺酸钠(SDS)的用量为0.05 g时制备的微胶囊的平均粒径小,粒径分布范围窄。最后将制备的微胶囊应用到丁腈橡胶(NBR)的硫化中,测试表明:与硫磺硫化NBR相比,微胶囊硫磺延长了焦烧时间和正硫化时间,提高了NBR的物理性能,并且能抑制“喷霜”现象。 |
其他语种文摘
|
For the purpose of developing a novel vulcanizing agent and self-healing material,melamineformaldehyde (MF)resin-walled microcapsules containing sulfur were prepared by in-situ polymerization.Such parameters as pH value,mass ratio of water to sulfur,molar ratio of formaldehyde to melamine,surfactant concentration and core content,were investigated by analyses of microcapsule morphology,particle size distribution and encapsulation efficiency.The morphology of microcapsules indicated that optimal pH value was 4.The mean diameter of microcapsules decreased with increasing surfactant concentration but changed slightly with core content.High encapsulation efficiency was achieved when mass ratio of water to sulfur was 8 :1,and the molar ratio of formaldehyde to melamine was 2 :1.In curometer test,the microcapsules coating sulfur curing system had longer scorch time and optimum curing time,and the vulcanized nitrile butadiene rubber (NBR)had better mechanical properties compared with those of sulfur vulcanized NBR. |
来源
|
化工学报
,2011,62(6):1716-1722 【核心库】
|
DOI
|
10.3969/j.issn.0438-1157.2011.06.036
|
关键词
|
原位聚合
;
微胶囊
;
密胺树脂
;
硫磺
;
硫化剂
|
地址
|
1.
(北京)中国石油大学, 中国石油大学(北京)重质油国家重点实验室, 北京, 102249
2.
中国石油大学(北京)理学院, 北京, 102249
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0438-1157 |
学科
|
化学工业 |
基金
|
北京市自然科学基金
|
文献收藏号
|
CSCD:4212475
|
参考文献 共
15
共1页
|
1.
李正西. The development and using of new productions of sulfur.
精细化工原料及中间体,2008(5):15-18
|
被引
1
次
|
|
|
|
2.
Jurkowska B. Radioisotopic determination methods of sulfur dispersion and sulfur blooming in rubber compounds.
Journal of Applied Polymer Science,1998,59:639-645
|
被引
1
次
|
|
|
|
3.
Koczorowska E. Studies of sulfur behavior in rubber compounds.
Journal of Applied Polymer Science,1998,69:1531-1536
|
被引
1
次
|
|
|
|
4.
Alan N G.
Engineering with Rubber:How to Design Rubber Component,2001:19-20
|
被引
1
次
|
|
|
|
5.
李和平. The development of insoluble sulfur and the concept of microcapsules loaded with sulfur.
橡胶工业,2008,55(1):59-63
|
被引
1
次
|
|
|
|
6.
邱祖民. 不溶性硫磺的发展及研究现状.
化学世界,2003,44(6):320-322
|
被引
4
次
|
|
|
|
7.
Monika J.
Microcapsules used for producing rubber and method for their production. :WO,024313,2004
|
被引
1
次
|
|
|
|
8.
Monika J.
Microencapsulated rubber additives and rubber additives and method for the production thereof. :WO,012495,2007
|
被引
1
次
|
|
|
|
9.
岳敏. Preparation and application of microcapsules coating sulfur.
橡胶工业,2008,55(II):669-675
|
被引
1
次
|
|
|
|
10.
Gobinath T.
Selfhealing materials and use thereof for extending the lifespan of a tire. :US,0173382 Al,2008
|
被引
1
次
|
|
|
|
11.
Hawlader M N A. Microencapsulated PCM thermal-energy storage system.
Applied Energy,2003,74:195-202
|
被引
86
次
|
|
|
|
12.
Yuan L. Preparation and properties of poly(urea-formaldehyde)microcapsules filled with epoxy resins.
Materials Chemistry and Physics,2008,110:417-425
|
被引
11
次
|
|
|
|
13.
Salaun F. Influence of process parameters on microcapsules loaded with nhexadecane prepared by in situ polymerization.
Chemical Engineering Journal,2009,155:457-465
|
被引
20
次
|
|
|
|
14.
熊联明.
Study on the preparation,application and flame retarding and smoke-suppressing mechanism of microencapsulated red phosphorus,2004
|
被引
1
次
|
|
|
|
15.
Holden G.
Thermoplastic Elastomers,2004:166-167
|
被引
1
次
|
|
|
|
|