|
星载电子设备加筋板优化设计
Optimization Design Research on Stiffened Panels of Spaceborne Electronic Equipment
查看参考文献7篇
文摘
|
星载电子设备动力学性能对于卫星工作可靠性具有重要意义.本文以某卫星星载电子设备为研究对象,采用拓扑优化与尺寸优化相结合的方法研究了该电子设备机箱加筋板的结构设计.建立了两层实体单元的板结构,以一阶频率最大为目标,通过拓扑优化得到加强筋结构的拓扑分布;之后在拓扑构型基础上,以结构质量最小为目标,一阶频率作为约束条件进行尺寸优化得到加筋板的详细结构 |
其他语种文摘
|
Dynamic performance of spaceborne electronic equipment is important to satellite. Topology optimization and size optimization were adopted to research stiffened panels for spaceborne electronic equipment of the NO.2 Haiyang satellite. In topology optimization, finite element model of two-layer solid element panel was built and maximizing the first order frequancy was the objective, then the top ologiral distribution of the stiffened panels is given. In sizing optimization, taking the first order frequaici as the constaint and minimizing the structure mass as the objective so the detailed stucture of the stiffened panels is obtained |
来源
|
机械设计与研究
,2011,27(2):40-43 【核心库】
|
关键词
|
星载电子设备
;
加筋板
;
拓扑优化
;
尺寸优化
|
地址
|
中国科学院空间科学与应用研究中心, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1006-2343 |
学科
|
自动化技术、计算机技术;航天(宇宙航行) |
基金
|
中国科学院知识创新工程青年人才领域前沿项目
|
文献收藏号
|
CSCD:4189221
|
参考文献 共
7
共1页
|
1.
徐福祥.
卫星工程概论,2004
|
被引
13
次
|
|
|
|
2.
彭春雷. 典型加筋整体壁板的优化设计.
机械研究与应用,2007,20(2):92-93
|
被引
2
次
|
|
|
|
3.
张柱国. 基于进化Kriging模型的金属加筋板结构布局优化方法.
南京航空航天大学学报,2008,40(4):497-500
|
被引
17
次
|
|
|
|
4.
BendsOe M P. Material interpolation schemes in topology optimization.
Arch. Appl. Mech,1999,69(9):635-654
|
被引
221
次
|
|
|
|
5.
Bendsge M P.
Topology Optimization: Theory, Methods and Applications,2003
|
被引
1
次
|
|
|
|
6.
Bendsoe M P. Generating optimal topologies in structural design using a homogenization method.
Comp. Meth. Appl. Mech. Eng,1988,71(1):197-224
|
被引
454
次
|
|
|
|
7.
Leiva J P. Modem structural optimization concepts applied to topology optimization.
Proceedings of the 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, St. Louis, MO,1999
|
被引
1
次
|
|
|
|
|
|