帮助 关于我们

返回检索结果

航行体有攻角出水全过程数值模拟
Numerical simulation of a submerged body exiting from water with an attack angle

查看参考文献15篇

文摘 水下航行体高速出水时, 空泡溃灭会产生较大的弯矩载荷, 是其结构强度的主要设计依据. 本文基于计算流体方法与结构动力学方法的单向耦合, 建立了航行体有攻角出水全过程数值模拟方法, 并针对抽象的典型]: 况进行了较大规模的并行计算, 最终得到了航行体关键截面的全时程载荷响应. 进一步通过分析航行体空泡形状和表面压力的演化特征, 解释了航行体出水载荷的直接形成原因
其他语种文摘 Large bending moment is produced when submerged bodies exiting from water with an angle of attack, which is the main design basis of structure strength. Numerical simulation process is established based on the single-direction couple of CFD and CSD methods. A typical case is simulated by large-scale parallel computing, and full-time response on key sections is finally acquired. By further study on the cavitating bubble and surface pressure, the mechanism of load on submerged bodies when exiting from water is explained
来源 水动力学研究与进展. A辑 ,2011,26(1):48-57 【核心库】
DOI 10.3969/j.issn1000-4874.2011.01.007
关键词 出水全过程 ; 空化 ; 溃灭 ; 载荷机理
地址

中国科学院力学研究所, 中国科学院水动力学与海洋工程重点实验室, 北京, 100190

语种 中文
文献类型 研究性论文
ISSN 1000-4874
学科 力学
文献收藏号 CSCD:4120815

参考文献 共 15 共1页

1.  COUTIER-DELGOSHA O. Analysis of cavitating flow structure by experimental and numerical investigations. J. Fluid Mech,2007,578:171-222 被引 13    
2.  MERKLE C L. Computational modeling of the dynamics of sheet cavitation. Proc. 3rd International Symposium on Cavitation, Grenoble, France,1996 被引 1    
3.  KUNZ R F. A preconditioned Navier-Stokes method for two-phase flows with application to cavitation. Comput. Fluids,2000,29(8):849-875 被引 117    
4.  SINGHAL A K. Mathematical basis and validation of the full cavitation model. Journal of Fluids Engineering,2002,124(3):617-624 被引 353    
5.  季斌. 二维水翼局部空泡脱落特性数值分析. 水动力学研究与进展, A辑,2008,23(4):412-418 被引 8    
6.  韩宝玉. 对二维翼空化流动的数值模拟. 水动力学研究与进展, A辑,2009,24(6):741-746 被引 1    
7.  杜特专. 动网格技术在非稳态空化流计算中的应用. 水动力学研究与进展, A辑,2010,25(2):191-198 被引 4    
8.  OWIS F M. Numerical simulation of 3-D incompressible, multi-phase flows over cavitating projectiles. European Journal of Mechanics-B/Fluids,2004,23(2):339-351 被引 7    
9.  NEAVES M D. All-speed time-accurate underwater projectile calculations using a preconditioning algorithm. Journal of Fluids Engineering,2006,128(2):284-296 被引 15    
10.  WANG G Y. Dynamics of attached turbulent cavitating flows. Progress in Aerospace Sciences,2001,37(6):551-581 被引 73    
11.  胡影影. 半无限长柱体出水数值模拟. 清华大学学报(自然科学版),2002,42(2):235-238 被引 10    
12.  傅慧萍. 回转体空泡流特性研究. 水动力学研究与进展, A辑,2005,20(1):84-98 被引 18    
13.  权晓波. 航行体出水过程空泡溃灭特性研究. 船舶力学,2008,12(4):545-549 被引 20    
14.  Fluent Inc. FLUENT 6.3 User's Guide,2006 被引 39    
15.  Wilcox D C. Turbulence modeling for CFD (2nd edition),1998 被引 2    
引证文献 17

1 曹伟 射流速度对气幕发射方式下航行体运动过程的影响研究 工程力学,2013,30(9):288-292
被引 0 次

2 施红辉 完全超空泡出水的实验研究及理论分析 空气动力学学报,2014,32(4):544-550
被引 7

显示所有17篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号