不锈钢激光搭接焊接头温度场数值模拟及分析
Numerical Simulation and Analysis on Temperature Field for Laser Welded Stainless Steel Lap Joint
查看参考文献15篇
文摘
|
温度场是影响激光焊接焊缝成形质量的关键因素. 针对非熔透型激光搭接焊接头焊缝成"钉头"状的特点,通过分析焊接时材料吸收激光能量的分布情况,提出了高斯面热源加线性递增式柱热源的复合体热源模型. 模型考虑板间接触热阻的影响,并将计算结果和试验结果进行了对比,发现模拟出的焊缝形状和试验吻合较好;此外基于本模型对焊缝各处的热循环与焊缝组织形貌及显微硬度的关系进行了分析. 结果表明,焊缝组织形貌及显微硬度除与加热和冷却速率有关外,峰值温度对其也有重要影响;在热循环基本一致的情况下焊缝的性能相似. 该模型较准确地模拟了薄板激光深熔焊接熔池温度场,对研究激光深熔焊接温度场问题和激光工艺参数的优化选择具有参考价值 |
其他语种文摘
|
Temperature field is the key factor affecting manufacturing quality in laser welding. For a nail head shape of weld cross-section in the partial penetration laser lap welding, a hybrid heat source model combined with a circular disk source with a Gaussian distribution on the top surface and a linear increasing column source along the depth of weld is proposed, by analyzing the absorption mechanism of the welding material. The effect of the contact thermal resistance between the upper sheet and bottom sheet is considered in the model. The comparison of experimental and simulated results shows that the geometry of weld cross sections is in good agreement. In addition, the relationship is investigated between the thermal cycles and microstructure as well as the micro-hardness. Besides the heating and cooling rate, the peak temperature also has an important influence on mechanical properties of the weld. The performance of the weld is similar when thermal cycles are consistent. The numerical model can help to study the temperature field of the laser deep penetration welding and choose appropriate laser parameters |
来源
|
中国激光
,2010,37(12):3180-3186 【核心库】
|
DOI
|
10.3788/cjl20103712.3180
|
关键词
|
激光技术
;
激光搭接焊
;
数值模拟
;
温度场
;
吸收系数
;
热循环
;
接触热阻
|
地址
|
中国科学院力学研究所先进制造工艺力学实验室, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0258-7025 |
学科
|
金属学与金属工艺;电子技术、通信技术 |
基金
|
国家自然科学基金重点项目
;
中国科学院知识创新工程领域前沿项目
|
文献收藏号
|
CSCD:4088714
|
参考文献 共
15
共1页
|
1.
王洪潇. 铁道客车用SUS301L不锈钢非熔透型激光搭接焊工艺.
热加工工艺,2009,38(19):136-139
|
被引
10
次
|
|
|
|
2.
Waler W. Duley.
Laser Welding,1999:3-9
|
被引
1
次
|
|
|
|
3.
虞钢. 异种金属激光焊接关键问题研究.
中国激光,2009,36(2):261-268
|
被引
32
次
|
|
|
|
4.
Seiji Katayama. Interpretation of laser weld penetration and welding phenomena.
Chinese J. Lasers,2009,36(12):3160-3166
|
被引
6
次
|
|
|
|
5.
Mackwood A P. Thermal modelling of laser welding and related processes: a literature review.
Optics & Laser Technology,2005,37(2):99-115
|
被引
14
次
|
|
|
|
6.
朱妙凤. 铝合金激光焊接过程有限元模拟与分析.
焊接学报,2008,29(4):97-101
|
被引
6
次
|
|
|
|
7.
Lee J Y. Mechanism of keyhole formation and stability in stationary laser welding.
J. Phys. D-Appl. Phys,2002,35(13):1570-1576
|
被引
16
次
|
|
|
|
8.
Lampa C. An analytical thermodynamic model of laser welding.
J. Phys. D-Appl. Phys,1997,30(9):1293-1299
|
被引
13
次
|
|
|
|
9.
葛新石(译).
传热和传质基本原理,2007:62-70
|
被引
1
次
|
|
|
|
10.
Brent A D. Enthalpy porosity technique for modeling convection diffusion phase change application to the melting of a pure metal.
Numerical Heat Transfer,1988,13(3):297-318
|
被引
35
次
|
|
|
|
11.
Kutsuna M. Thermal cycles and microstructures in laser welding of carbon steel.
ICALEO 92: Laser Materials Processing,1993:103-110
|
被引
1
次
|
|
|
|
12.
栗卓新(译).
不锈钢焊接冶金,2004:4-11
|
被引
1
次
|
|
|
|
13.
Jun Yan. Study on microstrucrure and mechanical properties of 304 stainless steel joints by Tig, laser and laser-Tig hybrid welding.
Optics and Lasers in Engineering,2010,48(4):512-517
|
被引
1
次
|
|
|
|
14.
吴世凯. 大厚度不锈钢板的激光焊接.
中国激光,2009,36(9):2422-2425
|
被引
35
次
|
|
|
|
15.
Capello E. Laser welding and surface treatment of a 22Cr-5M-3Mo duplex stainless steel.
Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2003,351(1/2):334-343
|
被引
13
次
|
|
|
|
|