激光冲击强化诱导的残余应力影响因素分析
Parameters Analysis of Residual Stress Induced by Laser Shock Processing
查看参考文献17篇
|
文摘
|
考虑激光冲击强化后塑性区深度及最大残余压应力的影响因素和影响规律问题,运用量纲分析的方法获得了影响冲击强化效果的主控因素,并给出了塑性区深度及最大残余压应力与峰值压力、压力持续时间、光斑半径的关系;利用基于LS-DYNA的二维轴对称有限元模型,计算了不同参数条件下金属靶体受冲击载荷作用的动态响应.计算结果表明,塑性区深度与压力持续时间成正比;最大残余压应力与压力持续时间无关;一定光斑半径范围内,塑性区深度及最大残余压应力与光斑半径无关;峰值压力超过一定值时,塑性区深度及最大残余压应力与峰值压力近似成线性关系 |
|
其他语种文摘
|
The paper focuses on the influencing parameters to the plastically affected depth and maximum residual stress in the metallic target after laser shock processing. Firstly, the dimensional analysis method is employed to find the controlling parameters, and the relationships of plastically affected depth, maximum residual stress versus peak pressure, pressure duration and laser spot size are given. Secondly,a two-dimensional axisymmetric finite element model based on LS-DYNA package is built, and the dynamic responses of metallic target subject to laser shock processing are computed with different input parameters. The result shows that the plastically affected depth is proportional to pressure duration, and the maximum residual stress is independent with it, but both of them are not affected by laser spot size within a certain range, while they have approximate linear relationship with peak pressure after reaching to a certain level |
|
来源
|
中国激光
,2010,37(10):2632-2637 【核心库】
|
|
DOI
|
10.3788/cjl20103710.2632
|
|
关键词
|
激光技术
;
激光冲击强化
;
塑性区深度
;
残余压应力
;
量纲分析
|
|
地址
|
中国科学院力学研究所, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0258-7025 |
|
学科
|
金属学与金属工艺;电子技术、通信技术 |
|
基金
|
国家自然科学基金
;
中国科学院科研装备研制项目
|
|
文献收藏号
|
CSCD:4021079
|
参考文献 共
17
共1页
|
|
1.
Peyer P. Laser shock processing:a review of the physics and applications.
Opt.and Quantum Electron,1995,27:1213-1229
|
被引
8
次
|
|
|
|
|
2.
罗新民. 激光冲击强化对2A02铝合金疲劳行为的影响.
中国激光,2009,36(12):3323-3328
|
被引
33
次
|
|
|
|
|
3.
李伟. 激光冲击强化对K417材料振动疲劳性能的影响.
中国激光,2009,36(8):2197-2201
|
被引
32
次
|
|
|
|
|
4.
张永康. AM50镁合金激光冲击强化实验研究.
中国激光,2008,35(7):1068-1072
|
被引
55
次
|
|
|
|
|
5.
Berthe L. Shock waves from a water-confined lasergenerated plasma.
J. Appl. Phys,1997,82:2826-2832
|
被引
42
次
|
|
|
|
|
6.
Fabbro R. Physical study of laser-produced plasma in confined geometry.
J. Appl. Phys,1990,68:775-784
|
被引
214
次
|
|
|
|
|
7.
曹子文. 激光冲击处理1Cr11Ni2W2MoV不锈钢.
中国激光,2008,35(2):316-320
|
被引
36
次
|
|
|
|
|
8.
Clauer A. H. Laser shock peening for fatigue resistance: proceedings of surface performance of titanium.
Met. Soc. AIME,1996:217-230
|
被引
1
次
|
|
|
|
|
9.
Peyer P. Experimental determination by PVDF and EMV techniques of shock amplitudes induced by 0.6~ 3 ns laser pulses in a confined regime with water.
J. Appl. Phys,2000,33:498-503
|
被引
2
次
|
|
|
|
|
10.
Peyer P. Experimental study of laserdriven shock waves in stainless steels.
Appl. Phys,1998,84:5985-5992
|
被引
1
次
|
|
|
|
|
11.
Ballard P.
Residual Stresses Induced by Rapid Impact-Applications of Laser Shocking . Doctorial Thesis,1991
|
被引
1
次
|
|
|
|
|
12.
Ballard P. Residual stresses induced by laser-shocks.
J. Phys. IV.C,1991,3:487-494
|
被引
13
次
|
|
|
|
|
13.
Hu Yongxiang. An analytical model to predict residual stress field induced by laser shock peening.
J.. Manuf. Sci. Eng,2009,131(1):31017-31024
|
被引
1
次
|
|
|
|
|
14.
Zhang W. Micro scale laser shock processing of metallic components.
J. Manuf. Sci. Eng,2002,124(2):369-379
|
被引
12
次
|
|
|
|
|
15.
谈庆明.
量纲分析,2005:2-14
|
被引
1
次
|
|
|
|
|
16.
Zhang W. Microscale laser shock peening of thin ~ilms, Part l: Experiment, modeling and simulation.
J. Manuf. Sci. Eng., Transactions of the ASME,2004,126(1):10-17
|
被引
12
次
|
|
|
|
|
17.
Johnson G. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures.
Proceedings of the 7th International Symposium on Ballistics, The Hague, Netherlands International Ballistics Committee,1983:541-547
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问