Effect of specific pressure on microstructure and mechanical properties of squeeze casting ZA27 alloy
查看参考文献16篇
|
文摘
|
The effect of specific pressure on the microstructure and mechanical properties of ZA27 squeezed castings with high height-to-thickness ratio was studied. The results of DTA and SEM show that at high specific pressure the eutectic reaction of squeeze casting ZA27 alloy is restrained, and the final solidified structure is (η+ε) phases instead of eutectic phase (β+h+ε). At the same time, the primary reaction is promoted in squeeze casting ZA27 alloy solidified at high pressure, and the fine microstructure is obtained with the increase of pressure. Al and Cu elements are homogeneously distributed in matrix of squeeze casting ZA27 alloy. The homogenously distributed high-density fine ε phase can effectively hinder dislocation motion, and then the strength and plasticity of squeeze casting ZA27 alloy are increased. |
|
来源
|
Transactions of Nonferrous Metals Society of China
,2010,20(1):59-63 【核心库】
|
|
DOI
|
10.1016/s1003-6326(09)60097-2
|
|
关键词
|
ZA27 alloy
;
squeeze casting
;
specific pressure
|
|
地址
|
School of Materials Science and Engineering, Shenyang University of Technology, Liaoning, Shenyang, 110178
|
|
语种
|
英文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1003-6326 |
|
学科
|
金属学与金属工艺 |
|
文献收藏号
|
CSCD:3820481
|
参考文献 共
16
共1页
|
|
1.
GU C L. Present state of investigation and application of zinc and zinc alloy.
Nonferrous Alloy,2003,55(4):45-47
|
被引
4
次
|
|
|
|
|
2.
YANG Lian-fa. Deformation behaviors of magnesium alloy AZ31 sheet in cold deep drawing.
Transactions of Nonferrous Metals Society of China,2008,18(1):86-91
|
被引
11
次
|
|
|
|
|
3.
HU Hai-ming. Development of research on ZA27 alloy-A review (in Chinese).
Materials Review,1998,12(3):17-20
|
被引
4
次
|
|
|
|
|
4.
MORTON J R. Squeeze casting:From a theory to profit and a future.
Foundry Man,1994,87:23-28
|
被引
1
次
|
|
|
|
|
5.
CHADWICK G A. Principles and applications of squeeze casting.
Met Materials,1989,5(1):6-12
|
被引
9
次
|
|
|
|
|
6.
CLEGG A. Squeeze casting-A new process technology for engineer.
Foundry Trade Journal,1993,166(354):484-485
|
被引
5
次
|
|
|
|
|
7.
LI Yan-xia. Microstructure and properties of squeeze cast Al-Cu alloy with different applied pressure (in Chinese).
Foundry,2005,54(8):764-766
|
被引
2
次
|
|
|
|
|
8.
ZHANG Ming. Effect of pressure on microstructures and mechanical properties of Al-Cu-based alloy prepared by squeeze casting.
Transactions of Nonferrous Metals Society of China,2007,17(3):496-501
|
被引
28
次
|
|
|
|
|
9.
HONG Shen-zhang. Effects of the specific pressure on grain size in squeeze casting (in Chinese).
Special Casting and Nonferrous Alloy,2002,22(6):26-27
|
被引
1
次
|
|
|
|
|
10.
LI Rong-de. Effect of super-high pressure on the non-equilibrium solidified microstructure and mechanical properties of ZA27 alloy.
Foundry,2003,52(3):92-94
|
被引
1
次
|
|
|
|
|
11.
YU H P. Strengthening and toughening mechanism of ZA27 squeeze-cast alloy.
AFS Transactions,1997,47:689-692
|
被引
3
次
|
|
|
|
|
12.
XU Ji-ping. Squeeze casting of Zn-Al alloy gears with high strength (in Chinese).
Special Casting and Nonferrous Alloys,2005,25(10):637-638
|
被引
1
次
|
|
|
|
|
13.
LI Chen-xi. Research on the squeeze cast technology of the castings with large ratio of height to thickness.
China Foundry,2005,2(4):264-267
|
被引
2
次
|
|
|
|
|
14.
YAN Shu-qing. Effect of Al contents on microstructure and wear resistance of ZA alloy (in Chinese).
Hot Working Technology,2008,37(1):10-14
|
被引
1
次
|
|
|
|
|
15.
LI An-ming. Effect of silicon and manganese on mechanical properties and microstructure of as-cast ZA-27 alloy (in Chinese).
Foundry,2008,57(6):608-610
|
被引
1
次
|
|
|
|
|
16.
LI Zi-quan. Aging microstructural characteristics of ZA-27 alloy and SiCp/ZA-27 composite.
Transactions of Nonferrous Metals Society of China,2006,16(1):98-104
|
被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问