|
电沉积Ni-Co-W合金的微结构与软磁性能
Microstructure and Soft Magnetic Properties of Electrodeposited Ni-Co-W Alloys
查看参考文献9篇
文摘
|
采用电沉积方法,通过改变镀液的pH值,在Cu基体上分别制备出不同结构和成分的Ni-W和Ni-Co-W合金涂层.采用XRD、SEM、EDX分析涂层的结构和成分.对Ni-W、Ni-Co-W合金进行显微硬度测量及磁性测量,研究材料性能和微结构之间的关系.结果表明:pH值等于9时制备的Ni-Co-w合金结构是平均晶粒尺寸为5 nm的纳米晶,其显微硬度达到最大;在pH值等于6时制各的Ni-Co-W合金得到最小矫顽力(=23×79.6A/m),Co的加入使Ni-W合金的软磁性能变好. |
其他语种文摘
|
The Ni-W and Ni-Co-W alloys have been electrodeposited on copper substrates from a citrate bath. The effects of pH values on the microstructure,soft magnetic properties and mechanical behaviors of the electrodeposited alloys have been investigated by XRD,SEM,EDX,VSM and Vickers microhardness measurements. The results show that the pH value affects the microstructure of both of the alloys. The microstructure of the alloys shows an amorphous structure if the pH value is less than 9,and a nanocrystalline structure with average grain size of 5 nm at the pH value of 9. The Vickers microhardness of Ni-Co-W electrodeposits reaches 10.5 GPa in the case of nanocrystalline structure. The coercivity reaches the minimum of 23×79.6 A/m when the pH value is 6. The soft magnetic properties and microhardness of electrodeposited Ni-W alloys are improved by Co adding. |
来源
|
稀有金属材料与工程
,2009,38(7):1292-1295 【核心库】
|
关键词
|
电沉积
;
Ni-Co-W合金
;
显微硬度
;
磁性
|
地址
|
兰州大学, 甘肃, 兰州, 730000
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1002-185X |
学科
|
金属学与金属工艺 |
基金
|
国家教育部高等学校博士学科点专项科研基金
;
国家自然科学基金
|
文献收藏号
|
CSCD:3679376
|
参考文献 共
9
共1页
|
1.
Eliaz N.
Electrochimica Acta,2005,50:2893
|
被引
8
次
|
|
|
|
2.
Donten M.
Electrochimica Acta,2000,45:3389
|
被引
27
次
|
|
|
|
3.
Cesiulis H.
Solid State Electrochemistry,2002,6:237
|
被引
3
次
|
|
|
|
4.
吴海岭.
电镀与涂饰,1998,17(3):22
|
被引
1
次
|
|
|
|
5.
杨防祖. 镀液组成对Ni-W合金电沉积的影响.
材料保护,1999,32(8):1
|
被引
5
次
|
|
|
|
6.
Yamasaki T.
Scripta Mater,2001,44:497
|
被引
1
次
|
|
|
|
7.
Somekawa H.
Scripta Materialia,2004,50:1361
|
被引
2
次
|
|
|
|
8.
王一禾.
非晶态合金,1989
|
被引
49
次
|
|
|
|
9.
高汝伟. 纳米磁性材料的交换耦合相互作用、有效各向异性和磁性能.
自然科学进展,2006,16(8):921
|
被引
1
次
|
|
|
|
|
|