异种金属激光焊接关键问题研究
Research on Key Issues of Laser Welding of Dissimilar Metal
查看参考文献32篇
|
文摘
|
现代工程结构要求对异种金属材料进行焊接.激光焊接具有密度高、焊缝深宽比大、热影响区窄以及变形小等特点,成为异种金属材料焊接的有效方法.异种金属激光焊接过程包含多种效应,机制复杂.比如,材料性能差异对焊缝微观组织与宏观性能的影响;焊接熔池的形成、演化机制;熔池凝固过程焊接缺陷及残余应力形成等.围绕异种金属激光焊接过程中的关键问题,国内外开展了诸多研究工作,对此进行了全面阐述.在此基础上,指出异种金属材料激光焊接研究中的不足及发展方向. |
|
其他语种文摘
|
Advanced engineering structures require dissimilar metal jointing. Laser welding has such merits as high energy density, high depth-to-width ratio, narrow heat-affected zone and limited shape-deformation. Therefore, it becomes one of the effective approaches for jointing dissimilar metal combination. The procedure of laser welding for dissimilar metal is very complex. There are some key issues about laser welding mechanism, for instance, thermal-physical material properties, melt pool dynamics, melt-condensation mechanism, formation of welding defects and residual stress. The progress and present research of experimental and numerical simulation about these issues are discussed. On this basis, some problems of laser welding of dissimilar metal materials are put forward. |
|
来源
|
中国激光
,2009,36(2):261-268 【核心库】
|
|
DOI
|
10.3788/cjl20093602.0261
|
|
关键词
|
激光焊接
;
异种金属
;
熔凝机制
;
焊接缺陷
|
|
地址
|
中国科学院力学研究所, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
0258-7025 |
|
学科
|
金属学与金属工艺 |
|
基金
|
中国科学院知识创新工程重大项目
|
|
文献收藏号
|
CSCD:3622445
|
参考文献 共
32
共2页
|
|
1.
W.W.Duley.
Laser Welding,1999
|
被引
5
次
|
|
|
|
|
2.
Z.Sun. Laser welding of dissimilar metal combinations.
Journal of Materials Science Letters,1995,30:4205-4214
|
被引
1
次
|
|
|
|
|
3.
李亚江.
异种难焊材料的焊接及应用,2004:1
|
被引
7
次
|
|
|
|
|
4.
虞钢.
集成化激光智能加工工程,2001:1
|
被引
3
次
|
|
|
|
|
5.
A.F.H.Kaplan. Unbounded keyhole collapse and bubble formation during pulsed laser interaction with liquid zinc.
J.Phys.D:Appl.Phys,2002,35(11):1218-1228
|
被引
1
次
|
|
|
|
|
6.
E.M.Anawa. Control of welding residual stress for dissimilar laser welded materials.
Journal of Materials Processing Technology,2008,204(1/3):22-33
|
被引
1
次
|
|
|
|
|
7.
C.Radhakrishna. The formation and control of Laves phase in superalloy 718 welds.
Journal of Materials Science,1997,32(8):1977-1984
|
被引
24
次
|
|
|
|
|
8.
R.Kaul. Microstructural characterization of dissimilar laser weld between austenitic and ferritic stainless steels.
Journal of Laser Applications,2005,17(1):21-29
|
被引
2
次
|
|
|
|
|
9.
E.M.Anawa. Using Taguchi method to optimize welding pool of dissimilar laser-welded components.
Optics and Lasers Technology,2008,40(2):379-388
|
被引
1
次
|
|
|
|
|
10.
左铁钏.
高强铝合金的激光加工,2002
|
被引
45
次
|
|
|
|
|
11.
张盛海. 填充粉末对铝合金高功率CO_2激光焊接的影响.
中国激光,2005,32(6):860-863
|
被引
10
次
|
|
|
|
|
12.
张盛海. 铝合金高功率CO2激光粉末焊接.
中国激光,2006,33(5):714-718
|
被引
5
次
|
|
|
|
|
13.
A.Mathieu. Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire).
Optics and Lasers Technology,2007,39(3):652-661
|
被引
63
次
|
|
|
|
|
14.
K.Nishimoto. Laser pressure welding of Al alloy and low C steel.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING,2006,11(2):224-231
|
被引
5
次
|
|
|
|
|
15.
R.Borrisutthekul. Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy.
Material Science and Engineering,2007,467(1/2):108-113
|
被引
17
次
|
|
|
|
|
16.
L.M.Liu. Low-power laser/arc hybrid welding behavior in AZ-based Mg alloys.
Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2008,39A(7):1702-1711
|
被引
1
次
|
|
|
|
|
17.
L.M.Liu. Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer.
Scripta Materialia,2006,55(4):383-386
|
被引
18
次
|
|
|
|
|
18.
G.Phanikumar. Continuous welding of Cu-Ni dissimilar couple using CO_2 laser.
Science and Technology of Welding and Joining,2005,10(2):158-166
|
被引
3
次
|
|
|
|
|
19.
T.A.Mai. Characterisation of dissimilar joints in laser welding of steel-kovar copper-steel and copper-aluminium materials science and engineering a-structural materials.
Properties Microstructure and Processing,2004,374(1/2):224-233
|
被引
1
次
|
|
|
|
|
20.
Zhu Ying. The effect of different crystal conditions of filler metal on vacuum brazing of TiAl alloy and 42CrMo.
China Welding,2007,16(4):17-19
|
被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问