|
酚醛树脂高温热解的激波管实验研究
SHOCK TUBE STUDY OF PHENOLIC RESIN PYROLYSIS
查看参考文献12篇
文摘
|
采用激波管方法研究了酚醉树脂在温度1100K~1800K范围之间的热解过程.在激波管高温和短实验时间条件下,分析了实验样品颗粒在高温气相中的传热过程,讨论了样品颗粒达到热平衡的条件.通过色谱和质谱方法检测热解产物,获得了酚醛树脂高温热解产物分布和热解速率常数.酚醛树脂高温热解最主要的产物为水、一氧化碳、氢、乙炔和苯.温度1400 K将酚醛树脂热解分为高温和低温区,分别表现出不同的热解速率常数与温度的关系. |
其他语种文摘
|
The pyrolysis of phenolic resin was studied in a single-pulse shock tube at high temperatures between 1100 K and 1800 K. Considering the very high temperature and short duration time in a shock tube, the heat transfer process of sample particles in high temperature gas was analyzed and the heat equilibrium conditions between the phenolic resin powder and the ambient high temperature gas was also discussed. The pyrolysis product distribution and the pyrolysis rate constants of phenolic resin were determined using gas chromatograph and mass spectrometry. The major pyrolysis products were identified as water, carbon monoxide, hydrogen, acetylene and benzene. The pyrolysis process was divided into the lower and higher temperature regions at the temperature of 1400 K. The different dependency relationships of the pyrolysis rate constant with temperature for the lower and higher temperature regions were obtained. |
来源
|
力学学报
,2009,41(4):463-468 【核心库】
|
关键词
|
酚醛树脂
;
热解
;
再入过程
;
激波管
;
质谱分析
;
色谱分析
|
地址
|
中国科学院力学研究所, 中科院高温气体动力学重点实验室, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0459-1879 |
学科
|
力学;化学;一般工业技术 |
文献收藏号
|
CSCD:3508113
|
参考文献 共
12
共1页
|
1.
Steg L. Hypersonic ablation in high temperature aspects of hypersonic flow.
The high temperature aspects of hypersonic flow,1964
|
被引
1
次
|
|
|
|
2.
Keenan JA. Simulation of ablation in earth atmospheric entry[AIAA-1993-2789].
Proceedings of the AIAA 28th Thermophysics Conference,1993
|
被引
1
次
|
|
|
|
3.
Park C. Chemical-kinetic parameters of hyperbolic earth entry.
Journal of Thermophysics and Heat Transfer,2001,15(1):76-90
|
被引
25
次
|
|
|
|
4.
Cherng C. Characterization of phenolic resins with thermogravimetry-mass spectrometry.
Thermochimica Acta,1991,192:181-190
|
被引
3
次
|
|
|
|
5.
马伟. 酚醛树脂热解的动力学模型.
物理化学学报,2008,24(6):1091-1094
|
被引
1
次
|
|
|
|
6.
Ouchi K. Pyrolysis of coal I--Thermal cracking of phenol formaldehyde taken as coal models.
8th Annual Meeting of the Chemical Society of Japan,1959:429-443
|
被引
1
次
|
|
|
|
7.
Jackson WM. High temperature oxidative degradation of phenol-formaldehyde polycondensates.
Journal of Applied Polymer Science,1964,8(5):2163-2193
|
被引
7
次
|
|
|
|
8.
Rao MR. Thermochemical characterization of phenolic resins:Thermogravimetric and pyrolysis-GC studies.
Journal of Thermal Analysis,1997,49:261-268
|
被引
3
次
|
|
|
|
9.
马伟. 酚醛树脂激波管试验的高温热解研究.
航空材料学报,2008,28(2):91-94
|
被引
4
次
|
|
|
|
10.
Giedt WH.
Handbook of Heat Transfer,1973
|
被引
1
次
|
|
|
|
11.
Wall LA.
Fluoropolymers,1972
|
被引
2
次
|
|
|
|
12.
马伟. 激波管在酚醛树脂高温热解动力学研究中的应用.
实验流体力学,2008,22(2):61-67
|
被引
2
次
|
|
|
|
|
|