|
空间液体润滑多孔储油器特性研究
Characteristic Study on the Porous Reservoir of Liquid Lubricant in Space
查看参考文献9篇
文摘
|
液体润滑普遍存在于大多数空间运动部件中.然而,由于空间环境恶劣(低重力、高真空)所造成的润滑剂严重损失,许多液体润滑运动部件都不能达到其使用寿命的要求.因此,有必要采取措施对空间运动部件进行补油,利用多孔储油器补油便是其中的方法之一.由于其体积小、结构简单而广泛应用于小型航天仪器中,并在维持轴承腔内油膜厚度和油分布方面也能取得令人满意的效果,因此备受关注.离心作用和加热效应是使储油器溢油的两种方法,本文针对这两种方法,对空间多孔储油器的液体润滑剂储运规律进行理论分析,同时设计了离心供油和加热供油两套实验装置. |
其他语种文摘
|
Many moving mechanical assemblies for space mechanisms rely on liquid lubricants to provide performance. However, the loss of lubricant due to space environment may results in some moving mechanical assemblies don't work before the end of mission. So lifetime, many methods are applied to supply lubricant, one of these is porous reservoir. Porous reservoirs are widely used in small space mechanisms for their small volume, simple structure and low cost. They are desirable to maintain film thickness levels and oil distribution, so many researchers paid more attention to them. Centrifuging and heating can come into being lubricant transportation in reservoir. In this paper, the rule of lubricant transportation is analyzed on the influence of centrifuging and heating. Two experimental fixtures are designed to study the rule of lubricant transportation in porous reservoir. |
来源
|
空间科学学报
,2008,28(6):592-596 【核心库】
|
关键词
|
液体润滑
;
储油器
;
输运
|
地址
|
中国科学院力学研究所, 国家微重力实验室, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0254-6124 |
学科
|
航天(宇宙航行) |
基金
|
国家自然科学基金
;
中国科学院知识创新工程项目
|
文献收藏号
|
CSCD:3415486
|
参考文献 共
9
共1页
|
1.
Roberts M. A study of Oil Circulation in the R-4 SpinAxis Bearings with Sintered Nylon Ball Retainer, Cambridge(Massachusetts).
The Charles Stark Draper Laboratory,Report MIT E-2082,1966
|
被引
1
次
|
|
|
|
2.
Zaretsky E V. Liquid lubrication in space.
Tribol. Int.,1990,23(2):75-93
|
被引
8
次
|
|
|
|
3.
Marchetti M. Analysis of oil supply phenomena by sintered porous reservoirs.
Tribol. Lett.,2001,10(3):163-170
|
被引
13
次
|
|
|
|
4.
Meurisse M H. A 3D Conservative Model for Self-Lubricated porous journal bearings in a hydrodynamic steady state.
J. Tribol.,1999,121(3):529-537
|
被引
2
次
|
|
|
|
5.
Jamison W E. Applications of microporons polymer lubricants.
Lubr.Eng,1982,38(12):758-761
|
被引
1
次
|
|
|
|
6.
Sears F W.
Mechanics, Wave Motion and Heat,1958:401
|
被引
1
次
|
|
|
|
7.
Fote A A. Migration of hydrocarbon oil on metal substrates under the influence of temperature gradients.
Lubr. Eng.,1976,32(10):542-545
|
被引
1
次
|
|
|
|
8.
Fote A A. The behavior of thin oil films in the presence of porous lubricant reservoirs.
Wear,1978,46:377-385
|
被引
1
次
|
|
|
|
9.
Fote A A. Thermally induced migration of hydrocarbon oil.
J. Lubr. Tech.,1977,99:158-162
|
被引
2
次
|
|
|
|
|
|