帮助 关于我们

返回检索结果

焊接应力变形原理若干问题的探讨(二)
Discussion on principle of welding stress and distortion(2)

查看参考文献17篇

文摘 提出焊接残余应力形成和消除原理:焊接残余应力不是压缩塑性应变引起的,而是由于焊缝和近缝区金属在“力学熔点”及以下温度冷却收缩受阻产生的;消除焊接残余应力不是产生拉伸塑性应变以减少、抵消和补偿压缩塑性应变,而是将残余弹性应变转变为塑性应变;消除焊接残余应力并不是必须去除固有应变,部分去除或完全不去除固有应变也能完全消除残余应力。提出随焊后热精确控制应力变形焊接法,既可实现无应力焊接和无应力无变形焊接,也可实现适当压应力无变形焊接和较大压应力微变形焊接;并对传统方法与有限元法进行了分析比较。
其他语种文摘 Formation and relief mechanism of welding residual stress were addressed.Compressive plastic strain dose not play a role in the formation of welding residual stress.The residual stress is produced by the contraction of weld metal and its vicinity during the cooling process at the temperature below its "mechanical melting point".Residual stress elimination does not employ the tensile plastic strain to reduce,withdraw or compensate the compressive plastic strain,but to convert the residual elastic strain to a plastic one.The elimination of the inherent strain is not a prerequisite to eliminate welding residual stress.Partly removed or completely held inherent residual strains can also completely eliminated the residual stress.A new method is proposed to perform heating treatment following the welding torch to control stress-strain precisely,to realize the stress free welding or stress-free and non-distortion welding or even proper compressive stress and non-distortion welding or large compressive stress and minor distortion welding.The result is also compared with the traditional processing method and finite element analysis.
来源 焊接学报 ,2008,29(7):69-72 【核心库】
关键词 焊接应力应变 ; 压缩塑性应变 ; 固有应变 ; 无应力焊接 ; 无应力无变形焊接
地址

中国科学院金属研究所, 辽宁, 沈阳, 110016

语种 中文
文献类型 研究性论文
ISSN 0253-360X
学科 金属学与金属工艺
文献收藏号 CSCD:3355042

参考文献 共 17 共1页

1.  雷原(译). 焊接变形与应力,1958 被引 3    
2.  田锡唐. 焊接结构,1997 被引 19    
3.  中国机械工程学会焊接学会. 焊接手册;第3卷,1992 被引 1    
4.  汪建华. 焊接残余应力形成机制与消除原理若干问题的讨论. 焊接学报,2002,23(3):75-79 被引 26    
5.  曹阳. 焊接动成热应为云纹测试技术的研究?铝合金移动热源焊接热应变规律的特点分析. 机械工程学报,1990,26(1):35-39 被引 1    
6.  ASM Joining Division Council. Metal handbook:Volune 6. 10th ed,1993 被引 1    
7.  American Welding Society. Welding handbook:Volume 1. 8th ed,1987 被引 1    
8.  Masubuchi A. Analysis of welded structures,1980 被引 1    
9.  李菊. 钛合金薄板带热沉的TIG焊温度场. 焊接学报,2003,24(1):69-72 被引 4    
10.  王者昌. 关于焊接应力应变问题的再探讨. 焊接学报,2006,27(8):108-112 被引 8    
11.  Fujimoto T. A method for analysis of residual welding stresses and deformation based on the inherent strain. Journal of the Japan Welding Society,1970,39(4):236-252 被引 1    
12.  Uoda Y. A prediction method of welding residual stress using source of residual stress(Report I). Transactions of JWRI,1989,18(1):135-141 被引 1    
13.  中国机械工程学会焊接学会. 焊接手册:第3卷.2版,2001 被引 1    
14.  Ueda Y. Analysis of thermal elastic-plastic stress and strain during welding. Transactions of the Japan Welding Society,1971(2):90-100 被引 4    
15.  陈其良. 水轮机转轮叶片焊接残余应力分析. 焊接技术,2002(2):46-47 被引 1    
16.  黄文. 水轮机转轮叶片的应力分布及其裂纹成因. 实用测试技术,1999(3):33-34 被引 7    
17.  魏艳红. 不锈钢焊接凝固裂纹应力应变场数值模拟结果分析. 焊接学报,2000,21(2):36-38 被引 12    
引证文献 9

1 李菊 钛合金焊接过程应力应变特点分析 焊接学报,2010,31(3):53-56,60
被引 3

2 王学德 激光冲击消除焊接残余应力 塑性工程学报,2012,19(6):126-129
被引 3

显示所有9篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号