Effect of additive on corrosion resistance of NiFe_2O_4 ceramics as inert anodes
查看参考文献14篇
|
文摘
|
In order to improve the corrosion resistance of NiFe_2O_4 ceramics as inert anode, additive V_2O_5 was added to raw materials NiO and Fe_2O_3. The inert anodes of nickel-ferrite ceramics were prepared by powder metallurgic method and the static corrosion rate in Na_3AlF_6-Al_2O_3 was determined by mass loss measurement. The effect of V_2O_5 on sintering property and corrosion resistance was studied. The results show that V_2O_5 can promote the grain to develop completely and improve sintering property. EDS results show the reaction product Ni_2FeVO_6 distributes along the grain boundary. The corrosion tests show that V_2O_5 is beneficial to improving corrosion resistance remarkably. The reasons that V_2O_5 can improve the corrosion resistance must be V_2O_5 promoting the gains to develop completely and Ni_2FeVO_6 distributes along the grain boundary. The stable structure can control the chemical dissolution of ceramics anode and the reinforced grain boundary can control the grain-boundary corrosion rate. |
|
来源
|
Transactions of Nonferrous Metals Society of China
,2008,18(2):356-360 【核心库】
|
|
DOI
|
10.1016/s1003-6326(08)60062-x
|
|
关键词
|
NiFe_2O_4
;
inert anode
;
additive
;
corrosion resistance
|
|
地址
|
1.
School of Materials Science and Engineering, China University of Mining and Technology(Xuzhou), Xuzhou, 221008
2.
School of Materials and Metallurgy, Northeastern University, Shenyang, 110004
|
|
语种
|
英文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1003-6326 |
|
学科
|
矿业工程 |
|
基金
|
Science and Technology Foundation of China University of Mining and Technology, China
;
Postdoctoral Scientific Research Foundation of Jiangsu Province, China
|
|
文献收藏号
|
CSCD:3252039
|
参考文献 共
14
共1页
|
|
1.
PETERSON R D. Results of 100 h electrolysis test of a cermet anode:Operational results and industry perspective//.
Light Metals,1990:385-393
|
被引
7
次
|
|
|
|
|
2.
RP PAWLEK. Inert anodes:An update.
Light Metals,2002:449-456
|
被引
1
次
|
|
|
|
|
3.
DR SADOWY. Inert anode for the Hall-Héroult cell:The ultimate materials challenge.
JOM,2001,53(5):34-35
|
被引
1
次
|
|
|
|
|
4.
E OLSEN. Nickel ferrite as inert anodes in aluminium electrolysis(Part I):Material fabrication and preliminary testing.
Journal of Applied Electrochemistry,1999,29(3):293-299
|
被引
67
次
|
|
|
|
|
5.
Zhong-ning SHI. Copper-nickel superalloys as inert alloy anodes for aluminum electrolysis.
JOM,2003,55(11):63-65
|
被引
7
次
|
|
|
|
|
6.
M GLUCINA. Laboratory-scale performance of a binary Cu-Al alloy as an anode for aluminium electrowinning.
Corrosion Scienc,2006,48(9):2457-2469
|
被引
9
次
|
|
|
|
|
7.
YANG Jian-hong. Behaviour and improvement of SnO2-based inert anodes in aluminium electrolysis.
Light Metals,1993:493-495
|
被引
4
次
|
|
|
|
|
8.
Lei ZHANG. Preparation of NiFe2O4 inert anode and its electrolysis corrosion mechanism.
Journal of the Chinese Ceramic Society,2005,33(12):1431-1436
|
被引
2
次
|
|
|
|
|
9.
Yan-qing LAI. Densification of Ni-NiFe204 cermets for aluminum electrolysis.
Trans Nonferrous Met Soc China,2005,15(3):666-670
|
被引
3
次
|
|
|
|
|
10.
Zhong-liang TIAN. Electrical resistivity of NiFe2O4 ceramic and NiFe2O4 based cermets.
Trans Nonferrous Met Soc China,2004,14(3):421-425
|
被引
1
次
|
|
|
|
|
11.
RAY S R. Inert anodes for Hall cells.
Light Metals,1986:287-298
|
被引
2
次
|
|
|
|
|
12.
Yan-qing LAI. Results from 100 h electrolysis testing of NiFe2O4 based cermet as inert anode in aluminum reduction.
Trans Nonferrous Met Soc China,2006,16(4):970-974
|
被引
9
次
|
|
|
|
|
13.
LUO Tao. Study on corrosion of cermet inert anode based on nickel ferrite spinel.
Light Metals,2006:491-493
|
被引
1
次
|
|
|
|
|
14.
K MARIAK. Phase equilibria in the system NiO-V2O5-Fe2O3 in subsolidus area.
Therm Anal Calorim,2004,77:65-73
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问