帮助 关于我们

返回检索结果

Ti含量对NiAl-Cr(Mo)共晶合金凝固组织的影响
Effect of Ti addition on the microstructure of NiAl-Cr(Mo) eutectic alloy

查看参考文献10篇

肖旋 1   贾玉贤 1   周兰章 2   郭建亭 2  
文摘 添加Ti降低了NiAl-Cr(Mo)共晶合金凝固过程中NiAl/Cr(Mo)共晶生长速度,导致NiAl/Cr(Mo)胞状共晶组织的粗化,并因合金偏离共晶成分而促进先共晶NiAl相的形成.在添加Ti的NiAl-Cr(Mo)共晶合金中,Ti主要分布在基体NiAl相中.随着Ti含量的提高,过饱和的NiAl(Ti)基体发生分解,促进了Ni_2AlTi相的形成,并且NiAl/Cr(Mo)胞状共晶组织发生退化.Ni-33Al-28Cr-3Mo-5Ti共晶合金的NiAl基体中析出细小的Cr(Mo)相,Cr(Mo)共晶相中析出细小的NiAl相.
其他语种文摘 The results show that Ti addition lowers the growth speed of NiAl/Cr(Mo) eutectics during solidification of a NiAI-Cr(Mo) eutectic alloy,resulting in coarsening of NiAl/Cr(Mo) cellular eutectic structure,and pro-eutectic NiAl phase forms due to its composition departing from eutectic reaction point. Ti atoms mainly distributes in NiAl matix.With the increase of Ti content in the alloy,supersaturation of NiAI matrix with Ti decomposes and brings on the formation of Ni_2AlTi phase,simultaneously NiAl/Cr(Mo) cellular eutectic structure degenerates also.In the Ni-33Al-28Cr-3Mo-5Ti eutectic alloy,fine Cr(Mo) coherent particles precipitate in NiAI matrix,while small Cr(Mo) coherent precipitates exsit in Cr(Mo) eutectic phase.
来源 材料研究学报 ,2008,22(2):209-214 【核心库】
关键词 金属材料 ; 金属间化合物 ; NiAl-Cr(Mo)共晶合金 ; 合金化 ; 凝固组织
地址

1. 沈阳理工大学, 辽宁, 沈阳, 110168  

2. 中国科学院金属研究所, 辽宁, 沈阳, 110016

语种 中文
文献类型 研究性论文
ISSN 1005-3093
学科 金属学与金属工艺
文献收藏号 CSCD:3244416

参考文献 共 10 共1页

1.  S V Raj. in Structural Intermetallics 2001 Development and evalution of directionally-solidified NiAl/(Cr Mo)-based eutectic alloys for airfoil applications edited by K. J Hemker,2001:785 被引 1    
2.  J D Whittenberger. Ele-vated temperature strength and room-temperature tough-ness of directionally solidified Ni-33Al-33Cr-1Mo Metal. Mater Trans,2002,33:1385 被引 2    
3.  W S Walston. Structural Intermetallics 2001, Properties and application of NiA1 Eutectic Al-loys,2001:735 被引 1    
4.  R Darolia. Ductility and fracture toughness issues related to implementation of NiA1 for gas turbine applications. Intermetallics,2000,8:1321 被引 9    
5.  郭建亭. 金属间化合物NiAl-Cr(Mo,Hf)合金的研究. 金属学报,2002,38:1157 被引 5    
6.  C Y Cui. Deformation behavior and microstructure of DS NiAl/Gr(Mo)alloy containing Hf. Intermetallics,2002,10:1001 被引 8    
7.  R S Polvani. High temperature creep in semi--coherent NiAl-Ni2AlTi alloy Metall. Metall.Trans,1976,7:33 被引 11    
8.  肖旋. NiAl(Ti)-Cr(Mo)共晶合金的微观组织和力学性能. 金属学报,2006,42(10):1031 被引 7    
9.  S V Raj. Microstructural characterization of a directionally-solidified Ni-33(at.%)Al-31Cr-3Mo eutectic alloy as a function of withdrawal rate. Intermetallics,2001,9:217 被引 9    
10.  J D Whittenberger. Effect of growth rate on elevated temperature plastic flow and room temperature fracture toughness of directionally so-lidified NiAl-31Cr-3Mo. Intermetallics,1999,7:1159 被引 4    
引证文献 1

1 商昭 定向凝固NiAI-Cr(Mo)共晶复合材料的研究进展 材料导报,2011,25(5A):1-5
被引 3

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号